Abstract:Abstract Considering the internal collision vibration-driven and external discontinuous resistance tolerance fusion conditions, the non-smooth dynamics characteristics of collision and stick-slip vibration-driven system are studied and experimented. Unilateral collision behavior of internal oscillators under the action of a periodic force to achieve system motion in different directions, it overcome the external Coulomb friction force and drives the system to drive in steady state under a certain direction. The kinematic and dynamic models of the system are established, and the collision and stick-slip driving motion of the system is analyzed based on the theory of non-smooth dynamics. The voice coil motor is used as the internal driving element, and the vibration driving test platform is designed and fabricated, and the driving characteristics of the system are studied experimentally. The study shows that there are three forms of movement in the steady state driving motion of the system: sticking motion, forward motion and backward motion; sine wave excitation and triangular wave excitation as input excitation have the characteristic of smoother operation with less shock; external excitation parameter regulation can change the system speed and direction of the movement; excitation frequency as a regulation parameter has the advantages of speed bandwidth, continuity, and so on; the system average driving speed in the numerical simulation and experimental test with the system average driving speed in numerical simulation and experimental test has the same rule of change, the backward motion is located in the low-frequency region, the forward motion is located in the high-frequency region, the friction coefficient and the excitation amplitude affect the size of driving speed. The results and methods of this study provide a corresponding theoretical basis for the design and parameter optimization of vibration-driven robots.

Planar Motion Analysis and Control of Vibration-Driven System Driven by Three-Phase Motion of Two Internal Masses *

Locomotion Analysis of a Vibration-Driven System with Three Acceleration-Controlled Internal Masses

Planar locomotion of a vibration-driven system with two internal masses

ANALYSIS ON PLANAR OBSTACLE AVOIDANCE LOCOMOTION OF VIBRATION-DRIVEN SYSTEM

Controlled Motion of a Two-Module Vibration-Driven System Induced by Internal Acceleration-Controlled Masses

Speed control for under-actuated planar biped robot

Dynamic Analysis and Optimization of a Three-phase Control Mode of a Mobile System with an Internal Mass

SLIDING BIFURCATIONS OF RECTILINEAR MOTION OF A THREE-PHASE VIBRATION-DRIVEN SYSTEM SUBJECT TO COULOMB DRY FRICTION

A Three-Phase Vibration-Driven System's Locomotion on an Isotropic Rough Surface.

A vibration-driven planar locomotion robot - Shell.

Locomotion of Two Vibration-Driven Modules Connected by a Mechanical Position Limiter

Dynamics of a Mobile System with an Internal Acceleration-Controlled Mass in a Resistive Medium

Geometric analysis-based trajectory planning and control for underactuated capsule systems with viscoelastic property

Fast and Accurate Motion Tracking of a Linear Motor System under Kinematic and Dynamic Constraints: an Integrated Planning and Control Approach

A practical approach to motion control for planar multi-rigid-body systems

Dynamics of a three-module vibration-driven system with non-symmetric Coulomb’s dry friction

Dynamic Modeling and Analysis of Nonlinear Compound Planetary System

Modeling, driving characterization of collision and stick-slip vibration-driven system

Synchronous Movement Analysis of a Vibrating Body Driven by Double Vibrators in the Same Axid

Synchronous Control of Multi-Motor Coupled with Pendulum in a Vibration System

Dynamic analysis of planar mechanical systems considering stick-slip and Stribeck effect in revolute clearance joints