Capillary Imbibition of Fracturing Fluid in Unconventional Reservoirs: the Impact of Velocity-Dependent Dynamic Contact Angle
Yanling Gao,Keliu Wu,Zhangxin Chen,Weibing Tian,Jing Li,Jianfei Bi,Ziyang Huang
DOI: https://doi.org/10.56952/arma-2022-1021
2022-01-01
Abstract:ABSTRACT: In this work, we compare experimental data with different kinds of dynamic contact angle (DCA) models firstly, rationality of the values of fitting parameters are then analyzed. Based on the combined model, we modify the classic L-W equation further to consider the influence of DCA in the process of water imbibition in micro and nanoscale hydrophilic capillaries. Besides, the effects of static wettability and pore dimension are investigated. Results show that: 1) The velocity dependences of DCA predicted by different kinds of DCA models are similar to each other and they can all fit well with the experimental data due to the existence of fitting parameters. 2) DCA deviates from equilibrium contact angle (ECA) more in capillaries with larger dimensions, which is due to the lower flow resistance and higher imbibition velocity. 3)With the decreases of the ECA, the deviation between DCA and ECA increases, this is because energy dissipation in the meniscus is higher in more hydrophilic capillaries due to the stronger fluid-wall interaction. 4) For spontaneous water imbibition in hydrophilic capillaries, the influence of DCA is more obvious in capillaries with larger sizes or smaller ECA, where it should be considered for more accurate recovery prediction. 1. INTRODUCTION Capillary imbibition is an interesting and ubiquitous phenomenon in nature, and plays a significant role in many industries (Feng et al. 2018b), such as ultrafine filtration process, irrigation engineering, energy conversion/storage, powder engineering, etc. (Zhang and Pei 2020, Feng et al. 2018b). Specially, in petroleum engineering, imbibition in porous media has important applications in the flowback of fracturing liquid and the huff-puff development of oil and gas field (Tian et al. 2021a). During the imbibition process, fracturing fluid, which is made up of as much as 97 percent water, imbibes into the matrix from the fracture, expelling oil and gas there and is favorable to the final recovery when the pore surface is water-wet (Tian et al. 2021b). Therefore, the imbibition process has great prospects in the development of fractured and unconventional oil and gas reservoirs and the recovery enhancement (Yha et al. 2020).