Abstract:This paper presents a method of finite element (FE) modeling and analysis of the seismic behavior of fully prefabricated steel frames with end-plate joints, flexible braces and composite slabs. The main idea and objectives of this paper is to develop a finite element model with high accuracy, good stabilization and acceptable computational costs for the simulation of the cyclic behavior of multi-story steel frames with bolted end-plate joints and concrete slabs. Because of the apparent tension-compression asymmetry of flexible braces, and the complex connection details between slabs and steel structures, as well as the huge number of contact interactions between interfaces, the cyclic behavior of this type of frame cannot be simulated accurately with commonly used line-element models, shell element models, or multi-scale models. A quasi-static test of a full-scale three-story fully prefabricated steel frame under cyclic horizontal loads by the present authors was simulated with the finite element model. Hollow section box columns, I-section beams, end-plates, inner diaphragms and stiffeners were modeled using shell elements; high strength bolts and concrete slab were modeled with solid elements; and flexible braces and rebar were modeled with truss elements. In order to develop a mesh skill to reduce computational costs while ensuring calculation accuracy, several FEM models were built and validated against previous experimental studies: static testing of bolted T-stub connections and bolted tension splices, static and cyclic testing of bolted end-plate steel joints, push-out tests of stud shear connectors, as well as static and cyclic testing of bolted end-plate composite joints. To simulate the "elastic-yield-hardening in tension, and buckling-without capacity in compression" behavior of the flexible braces, a simplified model in ABAQUS based on truss elements was developed and validated against previous tests. Results showed that the proposed FE modeling method could accurately simulate the static and cyclic performance of bolted T-stub connections, bolted tension splices, bolted end-plate steel joints, stud shear connectors, bolted end-plate composite joints and flexibly braced steel frames. Deformation capacity, cyclic behavior, horizontal loading performance, energy dissipation and stiffness degradation of steel frames with bolted end-plate joints, prefabricated slabs and flexible braces could be accurately simulated by this FEM model, providing a practical and accurate modeling method for similar structures. In addition, further research on the structural seismic performance simulation, parametric study and seismic design method could be carried out using the finite element model developed in this paper.

Research on numerical model for flexural behaviors analysis of precast concrete segmental box girders

Numerical Analysis of Mechanical Properties of Precast Segmental Concrete Test Beam with External Tendons

Finite element method for prestressed concrete plane frame structures

Simulating analysis of cantilever casting of prestressed concrete bridge

A Flexure-Shear Coupling Fiber-Section Model for the Cyclic Behavior of R/C Rectangular Hollow Section Bridge Piers

Three-dimensional finite element analyses for cyclic responses of precast segmental bridge piers accounting for bond-slip degradation

Flexural Behavior of Precast Concrete Segmental Box-Girders with Dry Joints

Seismic Analysis Of Rectangular Hollow Section Rc Piers Including Flexure-Shear Coupling Behavior

Flexural Behavior of Precast UHPC Segmental Beams with Unbonded Tendons and Epoxy Resin Joints

Flexural Behavior of Precast Concrete Segmental Beams with Hybrid Tendons and Dry Joints

Fiber Section Based Flexure-Shear Coupling Analysis Model for RC Thin-Walled Piers

Finite Element Analysis on the Seismic Behavior of Fully Prefabricated Steel Frames

Experimental Study of Precast Segmental Bridge Box Girders with External Unbonded and Internal Bonded Posttensioning under Monotonic Vertical Loading

Flexural behaviors of prefabricated composite beams with segmented precast concrete slabs

Efficient numerical model for progressive collapse analysis of prestressed concrete frame structures

Analysis of Continuous PC Box Girder Bridges with CSWs by Using Equivalent Computational Model

Finite Element Modelling Approach for Precast Reinforced Concrete Beam-to-column Connections under Cyclic Loading

Analytical Models for Effective Flexural Rigidity of Concrete Segments and Joints

Theoretical study on the nonlinear performance of single-box multi-cell composite box-girder with corrugated steel webs under pure torsion

Numerical Simulation of Prefabricated Prestressed Bridge Piers Based on Fiber Beam Element

Nonlinear Behavior of Existing Pre-Tensioned Concrete Beams: Experimental Study and Finite Element Modeling with the Constitutive Serial-Parallel Rule of Mixtures