Abstract:Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Ahead of Print. Wear of rolling elements can produce a huge impact on the mechanical properties of screw-nut joint, and is one of primary causes resulting in the accuracy degradation or even failure of kinematic pairs. Many mechanical models have been constructed to investigate the vibration performance of rolling elements. But the wear influence is considered scarcely because of the complicacy of loading status and wear process. In this study, a novel wear prediction model can be proposed for screw-nut joint to overcome the above difficulty. An ultimate stiffness model can be constructed on basis of the wear model. The influences of running distance, external forces, preload, and structural parameters on wear performance are researched. A dynamic model of screw-nut joint with varying stiffness is constructed to carry out a detailed study on its vibration performance, particularly taking into account the coupling effect between wear and vibration. The influences of wear on the axial stiffness and vibration characteristics are studied based on the proposed model. Moreover, the change rules of axial stiffness and dynamic response under variable preloads are researched. The results indicate that the choice of parameters can produce an appreciable impact on the wear rate. The wear can result in the losses of stiffness and critical displacement of screw-nut joint. Although increasing the preload can improve the stiffness and the critical displacement, it also aggravates the wear degree. When the relative displacement between nut and screw is greater than the critical displacement, the balls with preload and axial force in opposite directions will be out of action, and the monotonic property of stiffness will also change. Due to the monotonicity of stiffness is not consistent before and after the critical displacement point, the amplitude-frequency curve presents a jumping phenomenon.

Kinematic Reliability Evaluation of Planar Mechanisms with Time-Varying Correlation of Wear in Multiple Joints

Modeling and simulation of wear for alignment mechanism of large aircraft component

Dynamic Response Analysis of Planar Multilink Mechanism considering Wear in Clearances

Wear time-dependent reliability analysis using Bayesian inference

Computational prediction and experimental validation of revolute joint clearance wear in the low-velocity planar mechanism

Modeling and simulation for wear prediction in planar mechanical systems with multiple clearance joints

Time-dependent kinematic reliability of motion mechanisms with dynamic factors

A Comprehensive Method for Joint Wear Prediction in Planar Mechanical Systems with Clearances Considering Complex Contact Conditions

Wear Analysis of Two Revolute Joints With Clearance in Multibody Systems

A multibody-dynamics based method for the estimation of wear evolution in the revolute joints of mechanisms that considers link flexibility

Dynamics Analysis of Spatial Parallel Mechanism with Irregular Spherical Joint Clearance

Dynamic modelling and properties analysis of 3RSR parallel mechanism considering spherical joint clearance and wear

Model and nonlinear dynamic characteristics analysis of screw-nut joint considering coupling effect of wear and vibration

Dynamic modeling and analysis of hybrid driven multi-link press mechanism considering non-uniform wear clearance of revolute joints

Dynamics Analysis of Spatial Multibody System With Spherical Joint Wear

Dynamic reliability analysis of mechanical system with wear and vibration failure modes

Numerical Study of the Effects on Clearance Joint Wear in Flexible Multibody Mechanical Systems

Dynamics research and chaos identification of rigid-flexible coupling multi-link mechanism with irregular wear clearances

Functional degradation reliability analysis for non-uniform wear of multi-rotating joints of mechanical structures

Computational Wear Prediction for Impact of Kinematics Boundary Conditions on Wear of Total Knee Replacement Using Two Cross-Shear Models

Simulating fatigue damage on planar mechanisms considering wear in revolute joints with clearance