Abstract:Artificial electronic skins covering complete robot bodies can make physical human-robot collaboration safe and hence possible. Standards for collaborative robots (e.g., ISO/TS 15066) prescribe permissible forces and pressures during contacts with the human body. These characteristics of the collision depend on the speed of the colliding robot link but also on its effective mass. Thus, to warrant contacts complying with the Power and Force Limiting (PFL) collaborative regime but at the same time maximizing productivity, protective skin thresholds should be set individually for different parts of the robot bodies and dynamically on the run. Here we present and empirically evaluate four scenarios: (a) static and uniform - fixed thresholds for the whole skin, (b) static but different settings for robot body parts, (c) dynamically set based on every link velocity, (d) dynamically set based on effective mass of every robot link. We perform experiments in simulation and on a real 6-axis collaborative robot arm (UR10e) completely covered with sensitive skin (AIRSKIN) comprising eleven individual pads. On a mock pick-and-place scenario with transient collisions with the robot body parts and two collision reactions (stop and avoid), we demonstrate the boost in productivity in going from the most conservative setting of the skin thresholds (a) to the most adaptive setting (d). The threshold settings for every skin pad are adapted with a frequency of 25 Hz. This work can be easily extended for platforms with more degrees of freedom and larger skin coverage (humanoids) and to social human-robot interaction scenarios where contacts with the robot will be used for communication.

IoT-Enabled Robot Skin System for Enhancement of Safe Human-Robot Interaction

User-Interactive Robot Skin with Large-Area Scalability for Safer and Natural Human-Robot Collaboration in Future Telehealthcare

A Digital Twin Based Large-Area Robot Skin System for Safer Human-Centered Healthcare Robots Toward Healthcare 4.0

Fluid-Driven Soft CoboSkin for Safer Human-Robot Collaboration: Fabrication and Adaptation.

CoboSkin: Soft Robot Skin with Variable Stiffness for Safer Human–Robot Collaboration

An IoT-Enabled Telerobotic-Assisted Healthcare System Based on Inertial Motion Capture.

A Smooth Velocity Transition Framework Based on Hierarchical Proximity Sensing for Safe Human-Robot Interaction

Review of Robot Skin: A Potential Enabler for Safe Collaboration, Immersive Teleoperation, and Affective Interaction of Future Collaborative Robots

Multifunctional Electronic Skins Enable Robots to Safely and Dexterously Interact with Human

Design and Implementation of Robot Skin Using Highly Sensitive Sponge Sensor

Development of Flexible Robot Skin for Safe and Natural Human⁻Robot Collaboration

Implementation of a Sponge-Based Flexible Electronic Skin for Safe Human–Robot Interaction

Low-Cost and Easy-to-Build Soft Robotic Skin for Safe and Contact-Rich Human–Robot Collaboration

TacSuit: A Wearable Large-Area, Bioinspired Multimodal Tactile Skin for Collaborative Robots.

Integrated Multifunctional Electronic Skins with Low-Coupling for Complicated and Accurate Human-Robot Collaboration

Adaptive Electronic Skin Sensitivity for Safe Human-Robot Interaction

Soft Sensitive Skin for Safety Control of a Nursing Robot Using Proximity and Tactile Sensors

Development of a Flexible Electronic Skin for Collaborative Robot Collision Detection

Safety Strategy for Human–Robot Collaboration: Design and Development in Cellular Manufacturing

A large-area less-wires stretchable robot electronic skin

Collaborative Robot Safety for Human-Robot Interaction in Domestic Simulated Environments