Abstract:This article proposes a climbing machining robot that can adsorb and move on the variable curvature surface of large and complex components to perform machining tasks. Active compliance suction units, which consist of twofold innovation, are proposed for this robot to overcome the bottleneck involving adsorption on the variable curvature surface. To solve the dilemma between high vacuum tolerance and surface compliance capability, we designed a novel trachea-inspired anisotropic stiffness sealing lip for the suction chamber, and it showed flexibility in the adsorption direction for adoption to complex surfaces and presented a high stiffness that can withstand large vacuum forces at its sides. Furthermore, to avoid vacuum leaks due to overstretching and overcompressing of the sealing lip, we developed an active compliance actuator to align the axis direction of the suction chamber with the normal direction of the adsorbed surface and maintain a suitable distance. To meeting strict weight and dimension demands, the actuator innovatively combines cable-driven units and 3-revolute-revolute-spherical parallel mechanism to reach a high load/weight ratio. The prototype of the climbing machining robot was developed and tested on a real large wind-turbine blade with variable curvatures ranging from 1 to 15 m. The experimental results show that the 10 kg-weight climbing machining robot with three ACSUs can provide over 1000 N adsorption force in total, and the fluctuation of adsorption forces can be reduced by 96% compared with that of robots with traditional pure passive compliance suction units. A comparative polishing experiment was executed on different curvature regions of the wind turbine blade, and the results prove that the proposed method can apply uniform polishing. In addition, a polishing-quality verification experiment was realized using the proposed climbing machining robot with a force-controlled polisher. These polishing experiments proved the machining capability of the proposed climbing robot.

An Adsorption Machining Robot and Its Force Design

End-effector Contact Force Estimation for the Industrial Robot in Automated Fiber Placement Processes with Dynamic End-Load Variations

Stiffness-oriented Posture Optimization in Robotic Machining Applications

Stiffness Parameter Identification and Cutting-Force-Induced Error Compensation of an Adsorption Machining Robot

Stiffness Evaluation of an Adsorption Robot for Large-Scale Structural Parts Processing

Optimization design and experimental research on magnetic components for wall-climbing robot

A Climbing Machining Robot for Large Components With Variable Curvature Surface

Mechanical Structure Design of Wearable Assistive Robot Driven by ADAMS System

Design of Permanent Magnetic Wheel-Type Adhesion-Locomotion System for Water-Jetting Wall-Climbing Robot

Experimental Investigation on Climbing Robot Using Rotation-Flow Adsorption Unit

Novel Mode and Equipment for Machining Large Complex Components

Conceptual Design and Kinematic Optimization of a Gantry Hybrid Machining Robot

Grinding Forces of a Manipulator for an on Site Turbine Blade Maintainance Robot

Mechanical Structure and Control System Design of Wall-Climbing and Obstacle-Crossing Robot with Magnetic Adsorption

Design and experiment verification of a new heavy friction-stir-weld robot for large-scale complex surface structures

DESIGN AND OPTIMIZATION OF MECHANICAL STRUCTURES FOR WALL-CLIMBING ROBOTS

Dynamic Modeling and Design Parameter Optimization of a 5-DoF Parallel Machining Robot

Design, Control and Implementation of an Intelligent Material Handling Robot

Motion/Force Transmissibility and Static Stiffness Based Workspace Identification for a Gantry Hybrid Machining Robot

Analysis and Simulation of Permanent Magnet Adsorption Performance of Wall-Climbing Robot

Design and Analysis of a Robotic End-Effector for Automated Hi-Lok Nut Installation