Abstract:The upcoming BIOMASS mission will provide P-band repeat-pass PolInSAR data from space for the improved mapping of global biomass. PolInSAR technique has been widely validated with the potential to invert forest height and estimate forest aboveground biomass (AGB). However, the robustness of PolInSAR-based AGB estimation across different sites still lacks full evaluation, especially for those with a varied forest type, heterogeneity (varied growth ratio between cover and height), and topographic relief. In this study, we concentrated on backscatter decomposition and forest height inversion, and developed a robust AGB estimation method that can be applied to different sites. Two dense and closed tropical forest sites (Paracou and Nouragues) and one open and heterogeneous boreal forest site (Krycklan) were selected as the study areas, and the corresponding airborne PolInSAR, LiDAR, and ground measured AGB data were used for validation and analysis. Results show that ground backscatter has the strongest correlation with AGB in boreal forests, but this correlation cannot be transferred to the tropical forests. Only canopy volume backscatter is almost free from topographic influence, and its relationship with AGB across three sites can be formulated using one exponential equation, producing the best estimation accuracy, with R 2 of 0.79 and RMSE of 61.5 tons/ha (relative RMSE of 20.0 %). Multi-baseline PolInSAR retrieved forest height with little bias in spite of the presence of temporal decorrelation. One power equation can be used to correlate PolInSAR forest height with AGB across three different sites, and LOO (leave-one-out) validation shows the R 2 of 0.85 and RMSE of 51.8 tons/ha (relative RMSE of 16.9 %). However, the RVoG-inverted PolInSAR FH was found to mainly represent the top forest height for open and heterogeneous forests, which means PolInSAR FH (forest height) lacks consideration for forest horizontal structure (e.g. forest density). In contrast, volume backscatter better captured forest density, and the proposed AGB model that combines PolInSAR FH and volume backscatter further improved the AGB estimation accuracy, especially for open forests: the plot-scale validation from all three sites shows R 2 was improved from 0.79 (volume backscatter) and 0.85 (PolInSAR FH) to 0.89, and RMSE decreased from 61.5 and 51.8 to 45.2 (relative RMSE of 14.7 %) tons/ha; for region-scale validation, R 2 was improved from 0.77 and 0.83 to 0.89, and RMSE decreased from 64.2 (relative RMSE of 39.0 %) and 54.5 (34.5 %) to 48.1 (29.4 %) tons/ha.

Three Problems in Forest Height Inversion Using P-Band Repeat-Pass Polinsar Data.

A Multibaseline Forest Height Inversion Method to Solve Three General Problems in P-Band Repeat-Pass PolInSAR Data

The impacts of spatial baseline on forest canopy height model and digital terrain model retrieval using P-band PolInSAR data

An improved dual-baseline PolInSAR method for forest height inversion

Retrieval of Boreal Forest Heights Using an Improved Random Volume over Ground (RVoG) Model Based on Repeat-Pass Spaceborne Polarimetric SAR Interferometry: The Case Study of Saihanba, China

Reducing Ambiguity of Volume-Only Coherence Improved Forest Height Inversion for P-Band Repeat-Pass Polinsar Data.

Improved forest biomass estimation based on P-band repeat-pass PolInSAR data across different forest sites

Improving Forest Height Retrieval by Reducing the Ambiguity of Volume-Only Coherence Using Multi-Baseline PolInSAR Data

Fusion Method for Vegetation Height Inversion with Multibaseline PolInSAR Data

An Improvement of Vegetation Height Estimation Using Multi-Baseline Polarimetric Interferometric SAR Data

Forest Aboveground Biomass Estimation Across Different Sites Using P-Band PolInSAR-Retrieved Forest Height

STMI: Small-Scale Tomography-Aided Multibaseline (pol)insar Forest Height Inversion Framework

Improved Three-stage Algorithm of Forest Height Retrieval with PolInSAR

The Optimum Baseline Analysis for Polinsar Forest Height Mapping.

Capabilities of BIOMASS Three-Baseline PolInSAR Mode for the Characterization of Tropical Forests

RESEARCH ON INVERSION MODELS FOR FOREST HEIGHT ESTIMATION USING POLARIMETRIC SAR INTERFEROMETRY

Forest Height Estimation Using MultiBaseline Low-Frequency PolInSAR Data Affected by Temporal Decorrelation

A Review of Forest Height Inversion by PolInSAR: Theory, Advances, and Perspectives

A Novel Four-Stage Method for Vegetation Height Estimation with Repeat-Pass PolInSAR Data Via Temporal Decorrelation Adaptive Estimation and Distance Transformation

Inversion of Boreal Forest Height Using the CRITIC Weighted Least Squares Three-Stage Temporal Decorrelation Iterative Algorithm

Accuracy Improvement Method of Forest Height Estimation for PolInSARImage