Abstract:Oil spills and micropollutants have become thorny environmental issues, posing serious threat to ecosystem and human health. To settle such dilemma, this study successfully constructed a robust and environmentally-friendly MOFs-COFs hybrid-based membrane (FS-50/COF(MATPA)-MOF(Zr)/PDA@PVDF) for the first time through solution synthesis and solvothermal method, combined with surface modification of FS-50 molecule. Importantly, we employed a simple two-step strategy to obtain the high-aspect-ratio MOFs fibers: (1) solvent regulation to generate smaller needle-like whiskers during the in-situ growth of MOFs on COFs; (2) high pressure induced directional crystallization in filtration process. The introduction of polydopamine (PDA) greatly improved the adhesion between coating and PVDF membrane. The in-situ growth of high length-diameter ratio MOFs fibers on blocky COFs greatly enhanced the specific surface area of MOFs-COFs hybrid, thus provided sufficient absorption sites. The functional groups of FS-50 endowed the hybrid membrane with superhydrophilicity and superoleophobicity, which facilitated to selectively penetrate water molecules and repel non-polar pollutants. The separation efficiency and decontamination mechanism of hybrid membrane to the simulated oily wastewater (containing various MPs, dyes, and pesticides) were investigated through experiments and theoretical calculations. The hybrid membrane could selectively and synchronously adsorb various dyes (20 mg/L-120 mg/L, almost 100% removal) and pesticides (10 mg/L for DIF and TET, adsorption rates 93.2% and 90.9%, respectively) from oil-water emulsion (50 mL). The large-scale coated sponge (6 cm × 4.5 cm × 3 cm) could quickly achieve separation of oil-water mixture (almost 100%) with a water permeability of more than 162 L m-2·h-1·bar-1, and simultaneously remove various MPs (PP-2000, PP-100, PE-2000, PS-100, 0.2 g/300 mL for each), Sudan Ⅲ (C0 = 200 mg/L), and DIF (C0 = 10 mg/L) from a simulant oily wastewater (300 mL), with the removal rates of almost 100% for MPs, 99.7% for Sudan Ⅲ, and 95.8% for DIF. Furthermore, we elucidated the removal mechanism of pesticide and dyes through simulating the theoretical adsorption energy and potential adsorption sites. The hybrid membrane not only provides a promising candidate for the removal of multiple pollutants from oil-water emulsion, but also opens a new strategy for achieving efficient and clean aquatic environment restoration.

Synchronous Removal of Emulsions and Soluble Organic Contaminants Via a Microalgae-Based Membrane System: Performance and Mechanisms

Simultaneous Separation of Multiphase Emulsion Mixture and Catalytic Degradation of BPA Via Microalgae Residue Membranes

Oscillating Membrane Photoreactor Combined with Salt-Tolerated Chlorella Pyrenoidosa for Landfill Leachates Treatment.

Enhanced MPBR with Polyvinylpyrrolidone-Graphene Oxide/pvdf Hollow Fiber Membrane for Efficient Ammonia Nitrogen Wastewater Treatment and High-Density Chlorella Cultivation

Hierarchical Ultrafiltration-Catalysis Ceramic Membrane for Enhanced Oily Wastewater Treatment: the Synergy Effect Between High-Efficiency Catalysis and Separation

A novel anaerobic/aerobic-moving bed-dynamic membrane combined biofilm reactor (A/O-MB-DMBR) treating mariculture wastewater with chitosan (CTS): Performance, control and microbial community

Sustainable Superwetting Membrane for Effective Separation of Oil–water Emulsion and Dye Removal

Synchronous Removal of Emulsions and Organic Dye over Palladium Nanoparticles Anchored Cellulose-Based Membrane

Design of carboxymethyl cellulose/alginate aerogels with anti-fouling and light-driven self-cleaning for enhanced oily wastewater remediation

Biomimetic cellulose-nanocrystalline-based composite membrane with high flux for efficient purification of oil-in-water emulsions

Mussel-inspired fabrication of superior superhydrophobic cellulose-based composite membrane for efficient oil emulsions separation, excellent anti-microbial property and simultaneous photocatalytic dye degradation

MOF Derived Carbon Nanofibers Substrate Supported Polymeric Ultrafiltration Membrane for Efficient Removal of Trace Organic Contaminants

Immobilized Microalgae for Anaerobic Digestion Effluent Treatment in a Photobioreactor-Ultrafiltration System: Algal Harvest and Membrane Fouling Control.

Constructing green superhydrophilic and superoleophobic COFs-MOFs hybrid-based membrane for efficiently emulsion separation and synchronous removal of microplastics, dyes, and pesticides

Mitigating membrane fouling by coupling coagulation and the electrokinetic effect in a novel electrocoagulation membrane cathode reactor

A Novel Symbiotic System Combining Algae and Sludge Membrane Bioreactor Technology for Wastewater Treatment and Membrane Fouling Mitigation: Performance and Mechanism

Coupling sodium percarbonate (SPC) oxidation and coagulation for membrane fouling mitigation in algae-laden water treatment.

A super-hydrophobic and antibiofouling membrane constructed from carbon sphere-welded MnO2 nanowires for ultra-fast separation of emulsion

UiO-66-NH 2 /hydrothermal carbon nanocomposite assembled mesh membrane with photocatalytic self-cleaning and antibacterial properties for on-demand oily wastewater separation

The Pre-Coated Photocatalytic Ceramic Membrane with Bi2O3-TiO2/ Powdered Activated Carbon Nanoparticles to Alleviate Ultrafiltration Fouling Caused by Intracellular Organic Matter of Microcystis Aeruginosa

Exploring the essential factors of performance improvement in sludge membrane bioreactor technology coupled with symbiotic algae.