Abstract:With the rapid development and broad applications of unmanned aerial vehicle (UAV)-based wireless stations in the sky, fundamental understanding and characterization of the realistic air-to-ground (A2G) communication link properties are crucial. In this article, a UAV-aided channel sounder with a real-time processing hardware system is developed for highly dynamic and nonstationary A2G channel measurements. In the hardware system, a global positioning system (GPS)-based triggering signal is designed, the equivalent antenna pattern affected by the UAV airframe is considered, and an appropriate sounding signal is selected, to improve the accuracy of measured channel impulse response (CIR). Moreover, real-time hardware processing algorithms for raw channel data, that is, CIR extraction, system response elimination (SRE), power loss recovery (PLR), and adaptive multipath component (MPC) recognition are developed and implemented on a single field-programmable gate array (FPGA) chip. In this way, the required storage size of channel data and the processing time for one slice of CIR is greatly decreased, which can meet the requirement of nonstationary A2G channel measurement with a high sampling rate and long-time measurement. A commercial channel emulator is used to reproduce controllable channels and verify the performance of the developed channel sounder. Finally, the developed channel sounder is applied to carry out A2G measurement campaigns at 3.5 GHz in a campus scenario. The channel characteristics, that is, path loss (PL), -factor, and path angle are analyzed. The measured channel characteristics are consistent with existing measurements under a similar scenario. The estimated path angles are also validated by the theoretical results. Thus, the channel sounder can be used to capture the nonstationary A2G channel characteristics for the system design and algorithm optimization of A2G commun- cations.

Gridless Compressed Sensing Based Channel Estimation for UAV Wideband Communications With Beam Squint

Time Varying Channel Tracking for Multi-UAV Wideband Communications with Beam Squint.

Three-Dimensional Non-Stationary Geometry-Based Modeling of Sub-THz MIMO Channels for UAV Air-to-Ground Communications.

Sensing-assisted Accurate and Fast Beam Management for Cellular-connected mmWave UAV Network

A Novel Channel Estimation Method for UAV in High-Capacity CDMA Network

Channel Tracking with Flight Control System for UAV Mmwave MIMO Communications

Beam Tracking for UAV Mounted SatCom on-the-Move with Massive Antenna Array

3D on and Off-Grid Dynamic Channel Tracking for Multiple UAVs and Satellite Communications

Ground-to-UAV sub-Terahertz channel measurement and modeling

Flight Sensor Data and Beamforming based Integrated UAV Tracking with Channel Estimation using Gaussian Process Regression

Jittering Effects Analysis and Beam Training Design for UAV Millimeter Wave Communications

A Geometry-Based Stochastic Channel Model for UAV-to-Ground Integrated Sensing and Communication Scenarios

Deep Learning for Channel Tracking in IRS-Assisted UAV Communication Systems

Channel Estimation and Self-Positioning for UAV Swarm.

A UAV-Aided Real-Time Channel Sounder for Highly Dynamic Nonstationary A2G Scenarios

Environment-aware UAV Communications: CKM Construction and Predictive Beamforming

A Three-Dimensional Time-Varying Channel Model for THz UAV-Based Dual-Mobility Channels

An Autofocus Approach for UAV-Based Ultrawideband Ultrawidebeam SAR Data With Frequency-Dependent and 2-D Space-Variant Motion Errors

LoS Sensing-based Channel Estimation in UAV-Assisted OFDM Systems

Wideband Spectrum Acquisition for UAV Swarm Using the Sparse Coding Fourier Transform

Joint Frame Structure, Beamwidth, and Power Allocation for UAV-Aided Localization and Communication