Highly Efficient T-shaped Deep-Red Thermally Activated Delayed Fluorescence Emitters: Substitution Position Effect.

Kai Zhang,Jianzhong Fan,Chuan-Kui Wang,Lili Lin

DOI: https://doi.org/10.1039/d1cp03144a

2021-01-01

Abstract:Modulating the relationship between molecular structures and luminescence properties as well as charge transfer properties of deep-red thermally activated delayed fluorescence (TADF) emitters has always been a great challenge.

What problem does this paper attempt to address?

Highly efficient red thermally activated delayed fluorescence emitters by manipulating the molecular horizontal orientation

Changjiang Zhou,Chen Cao,Dezhi Yang,Xiaosong Cao,He Liu,Dongge Ma,Chun-Sing Lee,Chuluo Yang

DOI: https://doi.org/10.1039/d1qm00155h

IF: 8.6834

2021-01-01

Materials Chemistry Frontiers

Abstract:A highly efficient red TADF emitter with a horizontal ratio of 85% of the emitting dipole orientation is reported.

materials science, multidisciplinary,chemistry
Thermally Activated Delayed Fluorescence Exciplexes with Phosphor Components Realizing Deep-Red to Near-Infrared Electroluminescence

Ming Zhang,Cai-Jun Zheng,Heng-Yuan Zhang,Hao-Yu Yang,Kai Wang,Yi-Zhong Shi,Hui Lin,Si-Lu Tao,Xiao-Hong Zhang

DOI: https://doi.org/10.1039/d2tc02694e

IF: 6.4

2022-01-01

Journal of Materials Chemistry C

Abstract:Compared with single-molecule TADF emitters, exciplexes can simplify the complicated molecule design and synthesis and have the superiority of conveniently realizing spectra with a bathochromic shift via mixing donor and acceptor components.
Highly Efficient Luminescence from a Red Thermally Activated Delayed Fluorescence Emitter with Flexible Conformation of Ancillary Groups.

Yu-Xin Jin,Zi-Qi Chen,Kai Zhang,Chen-Zong Yang,Ze-Hui Pan,Lei Ding,Yan-Qiu Sun,Chuan-Kui Wang,Man-Keung Fung,Jian Fan

DOI: https://doi.org/10.1002/chem.202301921

2023-01-01

Chemistry

Abstract:Robust scaffolds were typically applied in thermally activated delayed fluorescence (TADF) molecules to suppress the non-radiative decay, trigger the fast spin-flipping, and enhance the light out-coupling efficiency. Herein, we disclosed for the first time the positive effect of flexible conformation of ancillary groups on the photophysical properties of TADF emitter. The red TADF emitter Ph-TPA with flexible conformation demonstrated small excited-state structural distortion and low reorganization energy compared to the counterpart Mc-TPA with a rigid macrocycle. Consequently, Ph-TPA showed an excellent photoluminescent quantum yield (PLQY) of 92% and a state-of-the-art external quantum efficiency (EQE) of 30.6% at 630 nm. This work could deepen our understanding of structure-property relationships of organic luminophores and help us to rationalize the design of efficient TADF materials.
A Simple Molecular Design Strategy for Efficient Deep-Red Thermally Activated Delayed Fluorescence Emitter

Yu-Xin Jin,Huanling Liu,Yue Zhao,Zi-Qi Chen,Shengkai Hu,Kai Zhang,Man-Keung Fung,Dong-Ying Zhou,Liang-Sheng Liao,Jian Fan

DOI: https://doi.org/10.1016/j.cej.2024.150782

IF: 15.1

2024-01-01

Chemical Engineering Journal

Abstract:The design and synthesis of efficient deep-red (DR) thermally activated delayed fluorescence (TADF) materials is challenging. In this work, we reported a simple molecular design strategy for constructing DR TADF via embedding a high-Stokes-shift dye in molecular skeleton, which induced dual intramolecular charge transfer and structural relaxation of excited state while achieving remarkable electroluminescence (EL) performance. The proof-of-concept emitter BF2-TPA demonstrated longer emission wavelength than the Br/CN-containing counterparts. Organic light-emitting diode (OLED) based on BF2-TPA exhibited high external quantum efficiency (EQE) of 28.4 % at 656 nm. This work demonstrates the great potential of utilizing high-Stokes-shift fragment in constructing efficient DR TADF emitters.
Anthraquinone-Based Intramolecular Charge-Transfer Compounds: Computational Molecular Design, Thermally Activated Delayed Fluorescence, and Highly Efficient Red Electroluminescence

Qisheng Zhang,Hirokazu Kuwabara,William J. Potscavage,Shuping Huang,Yasuhiro Hatae,Takumi Shibata,Chihaya Adachi

DOI: https://doi.org/10.1021/ja510144h

IF: 15

2014-01-01

Journal of the American Chemical Society

Abstract:Red fluorescent molecules suffer from large, non-radiative internal conversion rates (k(IC)) governed by the energy gap law. To design efficient red thermally activated delayed fluorescence (TADF) emitters for organic light-emitting diodes (OLEDs), a large fluorescence rate (k(F)) as well as a small energy difference between the lowest singlet and triplet excited states (Delta E-ST) is necessary. Herein, we demonstrated that increasing the distance between donor (D) and acceptor (A) in intramolecular-charge-transfer molecules is a promising strategy for simultaneously achieving small Delta E-ST and large k(F). Four D-Ph-A-Ph-D-type molecules with an anthraquinone acceptor, phenyl (Ph) bridge, and various donors were designed, synthesized, and compared with corresponding D-A-D-type molecules. Yellow to red TADF was observed from all of them. The k(F) and Delta E-ST values determined from the measurements of quantum yield and lifetime of the fluorescence and TADF components are in good agreement with those predicted by corrected time-dependent density functional theory and are approximatively proportional to the square of the cosine of the theoretical twisting angles between each subunit. However, the introduction of a Ph-bridge was found to enhance k(F) without increasing Delta E-ST. Molecular simulation revealed a twisting and stretching motion of the NC bond in the D-A-type molecules, which is thought to lower Delta E-ST and k(F) but raise k(IC), that was experimentally confirmed in both solution and doped film. OLEDs containing D-Ph-A-Ph-D-type molecules with diphenylamine and bis(4-biphenyl)amine donors demonstrated maximum external quantum efficiencies of 12.5% and 9.0% with emission peaks at 624 and 637 nm, respectively.
Fundamental Theories of TADF

Dan Wang,Qisheng Zhang

DOI: https://doi.org/10.1016/b978-0-12-819810-0.00006-5

2022-01-01

Abstract:Noble metal-free thermally activated delayed fluorescence (TADF) molecules have attracted great attention because they open up the possibility of realizing high efficiency and low-cost organic light-emitting diodes. The structure–property relationship of these unusual emitters has been gradually revealed through combined theoretical and experimental investigations in the last decade. It is now known that the luminescent properties of TADF molecules are governed by some basic physical parameters, including the energy levels of the lowest excited singlet (S1) and triplet (T1) states, the radiation and non-radiation rates at S1, and the intersystem crossing rates between S1 and T1. This chapter gives an introduction to the physical concepts of these parameters and their experimental determination. Dynamic relationships among these parameters are discussed in terms of excited state relaxation and solid-state solvation. Finally, a quantum chemistry approach to the prediction of these parameters based on reasonable geometric and electronic structures is provided.
Novel Deep Red Thermally Activated Delayed Fluorescence Molecule with Aggregation-Induced Emission Enhancement: Theoretical Design and Experimental Validation

Kai Zhang,Xiao Zhang,Jianzhong Fan,Yuzhi Song,Jian Fan,Chuan-Kui Wang,Lili Lin

DOI: https://doi.org/10.1021/acs.jpclett.2c00779

IF: 6.888

2022-01-01

The Journal of Physical Chemistry Letters

Abstract:Thermally activated delayed fluorescence (TADF) molecules with deep red luminescence have shown great applications in organic light-emitting diodes (OLEDs). However, the development of high efficient deep red TADF emitters is full of resistance, and new design strategies are highly desired. This work theoretically predicts the luminescence properties and photophysical mechanism of a spiro-acridine based molecule DBPz-2spAc in toluene and aggregation states. Experiments further show that the solid state can effectively suppress nonradiative energy loss and thus improve luminescence efficiency. OLEDs based on DBPz-2spAc show high luminescence efficiency. In addition, studies based on spiro-acridine derivatives indicate that bending the degree of acridine in excited state will directly affect the nonradiative energy loss. This study improves the understanding of the luminous behavior of spiro-acridine derivative based TADF emitters in solution and in aggregation state, which should pave the way for the design of efficient deep red TADF materials.
Constructing high-efficiency orange-red thermally activated delayed fluorescence emitters by three-dimension molecular engineering

Lei Hua,Yuchao Liu,Binbin Liu,Zhennan Zhao,Lei Zhang,Shouke Yan,Zhongjie Ren

DOI: https://doi.org/10.1038/s41467-022-35591-w

IF: 16.6

2022-12-19

Nature Communications

Abstract:Abstract Preparing high-efficiency solution-processable orange-red thermally activated delayed fluorescence (TADF) emitters remains challenging. Herein, we design a series of emitters consisting of trinaphtho[3,3,3]propellane (TNP) core derivatized with different TADF units. Benefiting from the unique hexagonal stacking architecture of TNPs, TADF units are thus kept in the cavities between two TNPs, which decrease concentration quenching and annihilation of long-lived triplet excitons. According to the molecular engineering of TADF and host units, the excited states can further be regulated to effectively enhance spin-orbit coupling (SOC) processes. We observe a high-efficiency orange-red emission at 604 nm in one instance with high SOC value of 0.862 cm −1 and high photoluminescence quantum yield of 70.9%. Solution-processable organic light-emitting diodes exhibit a maximum external quantum efficiency of 24.74%. This study provides a universal strategy for designing high-performance TADF emitters through molecular packing and excited state regulation.

multidisciplinary sciences
Isomerization design for improving the efficiency of red thermally activated delayed fluorescence emitters based on pyridopyrazinophenanthroline acceptor

Guo Yuan,Da-Hao Wang,Feng-Ming Xie,Bo Zhang,Ying-Yuan Hu,Qiang Zhang,Hao-Ze Li,Yan-Qing Li,Jian-Xin Tang,Xin Zhao,Da-hao Wang,Fengming Xie,Yingyuan Hu,Hao-ze Li,Yanqing Li,Jianxin Tang

DOI: https://doi.org/10.1039/d3tc01504a

IF: 6.4

2023-01-01

Journal of Materials Chemistry C

Abstract:Developing novel acceptor unit with stronger electron absorption ability and deeper lowest unoccupied molecular orbital (LUMO) is of great significance for designing efficient red thermally activated delayed fluorescence (TADF) emitters....

materials science, multidisciplinary,physics, applied
Efficient Red Thermally Activated Delayed Fluorescence Emitters Achieved Through Precise Control of Excited State Energy Levels

Bohua Zhang,Siqi Liu,Jiangxue Pei,Meiting Luo,Yi Chen,Qingyu Jia,Zhaoxin Wu,Dongdong Wang

DOI: https://doi.org/10.1039/d4sc00535j

IF: 8.4

2024-01-01

Chemical Science

Abstract:The variety of highly efficient red/near-infrared (NIR) materials with thermally activated delayed fluorescence (TADF) feature is extremely limited so far, and it is necessary to expand the candidate pool of excellent red/deep-red emitters. However, how to control the energy level alignment of the 1CT (singlet charge transfer) state and the 3LE (triplet local excitation) state to improve the emission efficiency of materials remains a challenge. Herein, based on our previously reported green fluorescent material 67dTPA-FQ, three new donor-acceptor type TADF materials (TQ-oMeOTPA, TsQ-oMeOTPA and SQ-oMeOTPA) were designed by introducing 4,4 '-dimethoxy triphenylamine (MeOTPA) as the donor, and introduced S atoms on the acceptors to enhance the spin-orbit coupling (SOC) and CT effects. The theoretical calculations showed that the newly introduced MeOTPA and S atom successfully enhanced the CT effect of the materials, not only shifting the luminescence peak to the deep red region but also effectively adjusting the energy level alignment of the excited state, accelerating the reverse intersystem crossing process. Finally, the organic light-emitting diodes based on SQ-oMeOTPA exhibit an external quantum efficiency of 19.1%, with an emission peak at 619 nm. This work not only expands the candidate inventory of red TADF materials, but also proves the feasibility of designing emitters by adjusting the excited state energy levels, greatly broadening the diversity of TADF emitters in design, and providing a powerful means for rapidly screening efficient emitters in the future. By adjusting the excited state energy levels to design deep-red TADF emitters, providing a powerful means for rapidly screening efficient emitters in the future.
Theoretical Design and Performance Prediction of Deep Red/near-Infrared Thermally Activated Delayed Fluorescence Molecules with Through Space Charge Transfer.

Xiaofang Li,Xiaofei Wang,Zhimin Wu,Kai Zhang,Rui Li,Yuzhi Song,Jianzhong Fan,Chuan-Kui Wang,Lili Lin

DOI: https://doi.org/10.1039/d3cp05670h

2024-01-01

Abstract:Thermally activated delayed fluorescence (TADF) molecules with through-space charge transfer (TSCT) have attracted much attention in recent years because of their ability to simultaneously reduce the energy difference (Delta EST) and enlarge the spin-orbit coupling (SOC). In this paper, 40 molecules are theoretically designed by changing the different substitution positions of the donors and acceptors, and systematically investigated based on the first-principles calculations and excited-state dynamics study. It is found that the emission wavelengths of v-shaped molecules with intramolecular TSCT are larger than those of the molecules without TSCT. Therefore, the intramolecular TSCT can induce the red-shift of the emission and realize the deep-red/near-infrared emission. Besides intramolecular TSCT can simultaneously increase the SOC as well as the oscillator strength and reduce the Delta EST. In addition, PXZ or PTZ can also favor the realization of smaller Delta EST and red-shift emission. Our calculations suggest that intramolecular TSCT and suitable donors (-PXZ or -PTZ) are an effective strategy for the design of efficient deep red/near-infrared TADF emitters. Thermally activated delayed fluorescence (TADF) molecules with through-space charge transfer (TSCT) simultaneously reduce the energy difference (Delta EST) and enlarge the spin-orbit coupling (SOC).
Towards highly efficient red thermally activated delayed fluorescence materials by the control of intra-molecular π-π stacking interactions.

Yunge Zhang,Dongdong Zhang,Minghan Cai,Yilang Li,Deqiang Zhang,Yong Qiu,Lian Duan

DOI: https://doi.org/10.1088/0957-4484/27/9/094001

IF: 3.5

2016-01-01

Nanotechnology

Abstract:Thermally activated delayed fluorescence (TADF) materials have attracted much attention as they can achieve 100% theoretical internal quantum efficiency without using expensive noble metals. However, efficient red TADF emitters are hard to realize according to the energy gap law. Here, three donor-acceptor-donor type TADF emitters with the same acceptor of o-phthalodinitrile (PN) but different donors (9, 9-dimethyl-9, 10-dihydroacridine (DMAC), phenoxazine (PXZ), and phenothiazine (PTZ) for DMAC-PN, PXZ-PN, and PTZ-PN, respectively) have been synthesized, and it is observed that the performance of the emitters can be improved by reducing the intra-molecular p-p stacking. DMAC-PN with reduced intramolecular p-p stacking shows a photoluminescence quantum yield (PLQY) of 20.2% in degassed toluene solution, much higher than those of PXZ-PN, and PTZ-PN (0.8%, 0.2%, respectively). An organic light-emitting diode (OLED) employing DMAC-PN doped into 4,4'bis( 9H-carbazol-9-yl) biphenyl (CBP) as the emitting layer exhibits a maximum external quantum efficiency (EQE) of 10.2% with the emission peak at 564 nm. Moreover, when DMAC-PN is doped into a polar host, bis[2-(diphenylphosphino) phenyl] ether oxide (DPEPO), the OLED shows a large redshift of the emission maximum to 594 nm, while maintaining a peak EQE as high as 7.2%, indicating that efficient red TADF OLEDs can be fabricated by doping orange TADF emitters into hosts with proper polarity.
Efficient deep red/near-infrared thermally activated delayed fluorescence emitters <i>via</i> molecular reconstruction: theoretical insights

Kai Zhang,Lei Cai,Jianzhong Fan,Yuzhi Song,Lili Lin,Chuan-Kui Wang

DOI: https://doi.org/10.1039/d2cp03697e

2022-01-01

Abstract:Thermally activated delayed fluorescence (TADF) molecules with deep-red (DR) and near-infrared (NIR) luminescence show great potential in biomedical sensing/imaging and telecommunications. However, developing efficient DR- and NIR-TADF molecules remains a powerful challenge, and new design strategies are highly desired. Based on 2,3-bis(4-(diphenylamino)phenyl)quinoxaline-5,8-dicarbonitrile (CNQ-TPA), two novel TADF molecules CNQ-b-TPA and CNQ-f-TPA are theoretically constructed through the design strategy of molecular bonding and molecular fusion. The photophysical properties and luminescence mechanisms of the three molecules in toluene and the crystal state are revealed with first-principles calculations and the thermal vibration correlation function (TVCF) method. Compared with CNQ-TPA, CNQ-b-TPA and CNQ-f-TPA can achieve an effective red-shift of intrinsic emission and efficient DR and NIR emission. Remarkably, molecular bonding and molecular fusion not only greatly increase the oscillator strength, but also effectively reduce the energy gap between the first singlet excited state (S-1) and the first triplet excited state (T-1), resulting in their high radiative and reverse intersystem crossing rate. Moreover, the charge transport properties are studied based on kinetic Monte Carlo simulations. Molecular bonding to balance charge transport is found, enabling ambipolar transport properties. Our work provides a feasible solution to overcome the design limitations of previous DR- and NIR-TADF materials and predicts good candidates for both DR- and NIR-TADF emitters.
Theoretical Arrangement of Thermally Activated Delayed Fluorescence As Host for Fluorescent Emitter with Blue to Red Emission

Jianzhong Fan,Yuchen Zhang,Kai Zhang,Jie Liu,Guanyu Jiang,Feiyan Li,Lili Lin,Chuan-Kui Wang

DOI: https://doi.org/10.1016/j.saa.2019.04.033

2019-01-01

Abstract:Thermally activated delayed fluorescence (TADF) emitter is applied to obtain high triplet exciton utilization through reverse intersystem crossing process. However, for efficient TADF emitter, the contradiction between high efficiency and utilization need to be carefully balanced. In this work, we provide a theoretical design strategy to realize high exciton utilization and high luminescence efficiency simultaneously by taking the TADF molecules as host and efficient fluorescent luminescence molecules as guest to form TADF-host:fluorescence-guest system. Through investigating the photophysical properties by optimal Hartree-Fock (OHF) method, different TADF-host and various fluorescence-guest schemes are arranged. Moreover, large overlap between the emission spectra of TADF-host and the absorption spectra of fluorescence-guest indicates efficient Förster energy transfer process. Thus, five systems with blue to red emission are obtained. Furthermore, the charge transfer properties are studied by Marcus equation, efficient charge mobility and balanced charge transfer can be expected for studied systems which are important in constructing organic light emitting diodes (OLEDs). This work could provide promising emitting layer architecture for OLEDs with ultimate performance.
Intramolecular charge transfer effect for highly efficient deep red and near infrared thermally activated delayed fluorescence

Chen-Zong Yang,Ze-Hui Pan,Kai Zhang,Jing-Wen Tai,Lei Ding,Man-Keung Fung,Jian Fan,Chuankui Wang

DOI: https://doi.org/10.1039/d2mh01015a

IF: 13.3

2022-12-17

Materials Horizons

Abstract:Thermally activated delayed fluorescence (TADF) materials with emission in the deep red and near infrared (DR/NIR) region were underresearched due to the limited choice of strong donor/acceptor units. The current mainstream strategy for the design of DR/NIR TADFs was to increase the acceptor strength via the introduction of multiple sub-acceptor units, thereby narrowing the bandgap. In this work, intramolecular charge transfer (ICT) effect was applied for the development of acceptor units to achieve efficient DR/NIR TADFs. The ICT effect within the acceptor unit enhanced the π-electron delocalization, lowered the LUMO and redshifted the emission wavelength. In addition, the fusion of donor unit into planar acceptor skeleton rigidified the molecular structure and reduced the non-radiative decay. This proof-of-concept study demonstrated that ICT was an undoubtedly effective strategy for the rational design of efficient DR/NIR TADFs.

materials science, multidisciplinary,chemistry
Benzimidazobenzothiazole-based Highly-Efficient Thermally Activated Delayed Fluorescence Emitters for Organic Light-Emitting Diodes: A Quantum-Chemical TD-DFT Study

Qiuling Zhu,Keke Wen,Songyan Feng,Xugeng Guo,Jinglai Zhang

DOI: https://doi.org/10.1016/j.saa.2017.11.032

IF: 4.831

2017-01-01

Spectrochimica Acta Part A Molecular and Biomolecular Spectroscopy

Abstract:Based upon two thermally activated delayed fluorescence (TADF) emitters 1 and 2, compounds 3-6 have been designed by replacing the carbazol group with the bis(4-biphenyl)amine one (3 and 4) and introducing the electron-withdrawing CF3 group into the acceptor unit of 3 and 4 (5 and 6). It is found that the present calculations predict comparable but relatively large energy differences (approximate 0.5eV) between the lowest singlet S1 and triplet T1 states (∆EST) for the six targeted compounds. In order to explain the highly-efficient TADF behavior observed in compounds 1 and 2, the"triplet reservoir" mechanism has been proposed. In addition, the fluorescence rates of all six compounds are very large, in 107-108 orders of magnitude. According to the present calculations, it is a reasonable assumption that the newly designed compounds 3-6 could be considered as the potential TADF emitters, which needs to be further verified by experimental techniques.
Isomer Engineering for Red Thermally Activated Delayed Fluorescence Molecules: Luminescence Mechanism Study and Rational Molecular Design

Xin Zhao,Huanling Liu,Qingfang Mu,Zhen Xie,Yuzhi Song,Lili Lin,Jianzhong Fan,Yuanyuan Xu

DOI: https://doi.org/10.1016/j.cplett.2023.140937

IF: 2.719

2023-01-01

Chemical Physics Letters

Abstract:Developing efficient red TADF molecules remains a great challenge and it is extremely urgent to reveal the luminescence mechanisms through theoretical perspectives. Herein, the photophysical properties of two pairs of red TADF isomers in toluene and solid phase have been theoretically studied. Results indicate that, compared with trans-isomers, cis-isomers possess smaller energy gaps which bring fast RISC processes. While for molecules in solid phase, decreased energy gaps and increased spin orbit coupling constants are determined, all these factors contribute to the remarkable RISC processes. Furthermore, previous experimental measurements are reasonably explained and three new red TADF molecules are theoretically proposed.
Rational Design of Highly Efficient Orange‐Red/Red Thermally Activated Delayed Fluorescence Emitters with Submicrosecond Emission Lifetimes

Jia‐Xuan Hu,Shanshan Jiang,Dong‐Hai Zhang,Tianxiang Zhao,Fu‐Lin Lin,Lingyi Meng,Xu‐Lin Chen,Can‐Zhong Lu

DOI: https://doi.org/10.1002/advs.202300808

IF: 15.1

2023-06-07

Advanced Science

Abstract:In this work, orange‐red/red thermally activated delayed fluorescence materials achieve high photoluminescence quantum yields of up to 91% with ultrashort exciton lifetimes of less than 1 μs, demonstrating a successful balance between high efficiency and fast reverse intersystem crossing. Highly efficient organic light‐emitting diodes are realized with external quantum efficiencies of up to 25.0% and small efficiency roll‐offs. The development of orange‐red/red thermally activated delayed fluorescence (TADF) materials with both high emission efficiencies and short lifetimes is highly desirable for electroluminescence (EL) applications, but remains a formidable challenge owing to the strict molecular design principles. Herein, two new orange‐red/red TADF emitters, namely AC‐PCNCF3 and TAC‐PCNCF3, composed of pyridine‐3,5‐dicarbonitrile‐derived electron‐acceptor (PCNCF3) and acridine electron‐donors (AC/TAC) are developed. These emitters in doped films exhibit excellent photophysical properties, including high photoluminescence quantum yields of up to 0.91, tiny singlet‐triplet energy gaps of 0.01 eV, and ultrashort TADF lifetimes of less than 1 μs. The TADF‐organic light‐emitting diodes employing the AC‐PCNCF3 as emitter achieve orange‐red and red EL with high external quantum efficiencies of up to 25.0% and nearly 20% at doping concentrations of 5 and 40 wt%, respectively, both accompanied by well‐suppressed efficiency roll‐offs. This work provides an efficient molecular design strategy for developing high‐performance red TADF materials.

materials science, multidisciplinary,nanoscience & nanotechnology,chemistry
Modulating optoelectronic properties of red TADF emitters based on acenaphtho[1,2- b ]quinoxaline-3,4-dicarbonitrile through isomeric engineering

Bo Liu,Wen-Cheng Chen,Rong Zhang,Qiang Liu,Huaixin Wei,Wei-Le Wu,Longjiang Xing,Ruicheng Wang,Yuan Liu,Shaomin Ji,Hao-Li Zhang,Yanping Huo

DOI: https://doi.org/10.1016/j.dyepig.2023.111314

IF: 5.122

2023-04-17

Dyes and Pigments

Abstract:Developing new electron acceptors with high rigidity and structural adjustability is significant for realizing efficient long-wavelength thermally activated delayed fluorescence (TADF) emitters. Herein, a new acceptor group, acenaphtho[1,2- b ]quinoxaline-3,4-dicarbonitrile (AQCN), featuring a π-extended, rigid skeleton with high electron affinity, is developed for the construction of red TADF dyes. Two red light-emitting regioisomers, LB-Y and LB-T , featuring a Y-shape and T-shape D-A-D molecular configuration, respectively, were prepared by adjusting the relatively substituting position of two triphenylamine electron-rich moieties on AQCN. Through the isomeric engineering, it is found that LB-Y shows a high degree of molecular rigidity, matched excited-state energy level alignment, and decent interplay among singlet charge transfer excited state ( 1 CT), triplet locally excited state ( 3 LE) and triplet hybridized local and charge transfer excited state ( 3 HLCT). Therefore, LB-Y has a higher radiative transition rate (8.36 × 10 7 s −1 ), reverse intersystem crossing rate (1.02 × 10 5 s −1 ), and better electroluminescent performances ( λ EL = 614 nm, EQE max = 4.1%) than LB-T ( λ EL = 612 nm, EQE max = 2.6%). This study reports a promising electron acceptor and provides an efficient approach to modulating the optoelectronic properties of red TADF dyes.

engineering, chemical,chemistry, applied,materials science, textiles
Modulating Non‐Radiative Deactivation via Acceptor Reconstruction to Expand High‐Efficient Red Thermally Activated Delayed Fluorescent Emitters

Jianjun Liu,Zhiyi Li,Taiping Hu,Teng Gao,Yuanping Yi,Pengfei Wang,Ying Wang

DOI: https://doi.org/10.1002/adom.202102558

IF: 9

2022-02-27

Advanced Optical Materials

Abstract:The development of high‐efficient red thermally activated delayed fluorescent (TADF) materials is crucial to expanding their applications. Here, the acceptor reconstruction strategies of acceptor bonding and acceptor fusing in donor–acceptor‐type materials to modulate their nonradiative deactivation process and emission color for expanding high‐efficient red TADF emitters are presented. They are applied to design novel red TADF emitters TXO‐b‐TPA and TXO‐f‐TPA based on non‐red thioxanthone oxide (TXO) acceptor. Compared to TXO‐based emitter TXO‐TPA, these acceptor reconstruction strategies enable red‐shifted (48–88 nm) and efficient red TADF emission (600–640 nm). Their radiative and nonradiative transition processes can be modulated by the different molecular orbital and excited state distributions based on their acceptor structural differences, which results in a dramatic enhancement of their organic light‐emitting diode (OLED) device efficiencies from 1.21/3.63% (TXO‐f‐TPA) to 20.9% (TXO‐b‐TPA). These results confirm that the acceptor reconstruction strategies provide a viable solution for overcoming the limitations of previous red TADF emitters. Moreover, the retrieval of reported TADF materials can further demonstrate that these acceptor reconstruction strategies can be transferrable to more non‐red TADF materials to expand high‐efficient red‐shift and/or red TADF materials. The general acceptor reconstruction strategies of acceptor bonding and acceptor fusing for non‐red thermally activated delayed fluorescent (TADF) acceptors are developed to expand red TADF emitters. The reconstructed acceptor spatial structures induce the regulable radiative and non‐radiative transfer processes of the emitters for high‐efficient red TADF emission.

materials science, multidisciplinary,optics

Highly Efficient T-shaped Deep-Red Thermally Activated Delayed Fluorescence Emitters: Substitution Position Effect.

Highly efficient red thermally activated delayed fluorescence emitters by manipulating the molecular horizontal orientation

Thermally Activated Delayed Fluorescence Exciplexes with Phosphor Components Realizing Deep-Red to Near-Infrared Electroluminescence

Highly Efficient Luminescence from a Red Thermally Activated Delayed Fluorescence Emitter with Flexible Conformation of Ancillary Groups.

A Simple Molecular Design Strategy for Efficient Deep-Red Thermally Activated Delayed Fluorescence Emitter

Anthraquinone-Based Intramolecular Charge-Transfer Compounds: Computational Molecular Design, Thermally Activated Delayed Fluorescence, and Highly Efficient Red Electroluminescence

Fundamental Theories of TADF

Novel Deep Red Thermally Activated Delayed Fluorescence Molecule with Aggregation-Induced Emission Enhancement: Theoretical Design and Experimental Validation

Constructing high-efficiency orange-red thermally activated delayed fluorescence emitters by three-dimension molecular engineering

Isomerization design for improving the efficiency of red thermally activated delayed fluorescence emitters based on pyridopyrazinophenanthroline acceptor

Efficient Red Thermally Activated Delayed Fluorescence Emitters Achieved Through Precise Control of Excited State Energy Levels

Theoretical Design and Performance Prediction of Deep Red/near-Infrared Thermally Activated Delayed Fluorescence Molecules with Through Space Charge Transfer.

Towards highly efficient red thermally activated delayed fluorescence materials by the control of intra-molecular π-π stacking interactions.

Efficient deep red/near-infrared thermally activated delayed fluorescence emitters <i>via</i> molecular reconstruction: theoretical insights

Theoretical Arrangement of Thermally Activated Delayed Fluorescence As Host for Fluorescent Emitter with Blue to Red Emission

Intramolecular charge transfer effect for highly efficient deep red and near infrared thermally activated delayed fluorescence

Benzimidazobenzothiazole-based Highly-Efficient Thermally Activated Delayed Fluorescence Emitters for Organic Light-Emitting Diodes: A Quantum-Chemical TD-DFT Study

Isomer Engineering for Red Thermally Activated Delayed Fluorescence Molecules: Luminescence Mechanism Study and Rational Molecular Design

Rational Design of Highly Efficient Orange‐Red/Red Thermally Activated Delayed Fluorescence Emitters with Submicrosecond Emission Lifetimes

Modulating optoelectronic properties of red TADF emitters based on acenaphtho[1,2- b ]quinoxaline-3,4-dicarbonitrile through isomeric engineering

Modulating Non‐Radiative Deactivation via Acceptor Reconstruction to Expand High‐Efficient Red Thermally Activated Delayed Fluorescent Emitters