Abstract:The contamination of water resources by emerging contaminants, such as heavy metals and textile effluents, poses significant ecological and human health risks. Conventional effluent treatment plants may not effectively degrade all types of pollutants, resulting in the contamination of natural water resources. Photocatalysis, specifically the photo-Fenton reaction, has emerged as an efficient sustainable cost-effective method for the removal of pollutants. In this study, three batches (CF-1, CF-2, and CF-3) of copper ferrite nanoparticles (NPs) were synthesized and used as photocatalysts for the degradation of methylene blue (MB) dye and reduction of hexavalent chromium (Cr(VI)) under visible light. The CF-1, CF-2, and CF-3 required (90, 75, and 60 min.) different periods to reach a nearly similar degradation percentage, i.e., 90%, wherein the CF-3 batch demonstrated better catalytic activity. The successful synthesis of copper ferrite NPs was confirmed by XRD analysis which reveals the CuFe 2 O 4 phase. With the increased concentration of copper, the formation of the CuO phase alongside the CuFe 2 O 4 phase was observed. The CF-3 catalyst had a surface area of 44.496 m 2 /g according to BET studies. The catalyst exhibited a pore radius of 19.175 Å and an adsorption pore volume of 0.109 cc/g, as determined by the BJH method. TEM micrographs showed spherical-shaped NPs with sizes ranging from 55 to 60 nm. The photo-Fenton process was optimized by varying dye concentration, pH, catalyst, and hydrogen peroxide (H 2 O 2 ) dosages for MB degradation. The scavenger study reveals the contribution of the •OH radical over •O 2 − radical in the photo-Fenton process for MB degradation. The reduction of Cr(VI) was optimized by adjusting pH and Cr load. The CF-3 catalyst exhibited almost complete degradation of MB (32 mg/L) within 60 min and reduction of Cr(VI) (100 mg/L) within 20 min. The good reusability of the catalyst exhibits 71.4% MB degradation after four cycles and 78.34% Cr(VI) reduction after five cycles. The regression coefficient ( R 2 ) of the pseudo-second-order reaction was close to 1 and higher than the pseudo-first-order reaction. The catalyst achieved 0.0540 and 0.1047 1/min kinetic constant at pseudo-first-order reaction, while 0.0614 and 0.0497 L/mg.min kinetic constant was achieved at pseudo-second-order reaction for MB degradation and Cr(VI) reduction. These kinetic studies proved that the dye degradation and chromium reduction follow the pseudo-second-order reaction ( R 2 ). The overall study demonstrates the promising potential of magnetic CF-3 nanoparticles as efficient catalysts for industrial applications in dye degradation and Cr(VI) reduction.

Ultrasound assisted Fenton-like degradation of dyes using copper doped graphitic carbon nitride

geneous Fenton-like degradation of methylene blue by reduced CuFe 2 O 4 †

Characteristics and Mechanisms of 4A Zeolite Supported Nanoparticulate Zero-Valent Iron As Fenton-like Catalyst to Degrade Methylene Blue

Novel Flexible Fenton-like Catalyst: Unique CuO Nanowires Arrays on Copper Mesh with High Efficiency Across a Wide Ph Range

Enhanced Ultrasonic-Assisted Heterogeneous Fenton Degradation of Organic Pollutants over a New Copper Magnetite (Cu-Fe<sub>3</sub>O<sub>4</sub>/Cu/C) Nanohybrid Catalyst

Enhanced Heterogeneous Fenton-like Degradation of Methylene Blue by Reduced CuFe2O4

Facile preparation of Fe-C<sub>3</sub>N<sub>4</sub> heterojunction for enhanced pollutant degradation in Fenton-like process

g-C3N4/CuO loaded polyester fabric as effective Fenton-like dip-catalyst for the oxidation of dyes

Nano-PAA-CuCl2 Composite as Fenton-Like Reusable Catalyst to Enhanced Degrade Organic Pollutant MB/MO

Cu/Fe co-modified nitrogen self-doped biochar as a heterogeneous Fenton-like catalyst for degradation of organic pollutants: Synthesis, performance, and mechanistic study

Preparation of Heterogeneous Fenton Catalysts Cu-Doped MnO2 for Enhanced Degradation of Dyes in Wastewater

Ferrous-Oxalate-Modified Aramid Nanofibers Heterogeneous Fenton Catalyst for Methylene Blue Degradation.

Ag2O and NiO Decorated CuFe2O4 with Enhanced Photocatalytic Performance to Improve the Degradation Efficiency of Methylene Blue

Exploration of Copper-Cysteamine Nanoparticles As an Efficient Heterogeneous Fenton-like Catalyst for Wastewater Treatment

Catalytic and kinetic studies of CuFe2O4 as a superior heterogeneous nanocatalyst for dye degradation and Cr(VI) reduction

In situ synthesis of Cu+ self-doped CuWO4/g-C3N4 heterogeneous Fenton-like catalysts: The key role of Cu+ in enhancing catalytic performance

Development of mesh-type Fenton-like Cu/Fe x /γ-Al 2 O 3 /Al catalysts and application for catalytic degradation of dyes.

Synthesis, Characterization and Heterogeneous Photo-Fenton-like Catalyst Activity of a Novel Inorganic-Organic 2D Framework Based on Reduced Α-Keggin Phosphomolybdate

A Novel Octamolybdate‐based Organic–inorganic Hybrid As Photo‐fenton‐like Catalyst for Degradation of Methylene Blue

Graphitic carbon nitride modified with trace-level copper and carbon dots exhibits excellent photo-Fenton catalytic activity with low consumption of H2O2

Fe-S Co-doped Porous Carbon Catalyzed Oxidation and Degradation of Dye Wastewater