Abstract:Demand for higher power efficiency devices to be used in the various miniatured and portable equipment has increased and led to significant growth in the electrochemical capacitors. Currently, different available electrochemical capacitors mostly deliver the highest performance at low frequencies (less than 1 Hz) due to the microporous electrode structures and configurations. Due to these reasons, the use of such capacitors is still not commercialized because of the insufficient supply of direct current at a higher frequency range (between 100 and 200 Hz). Considering the large-scale electricity applications mainly carried with alternating current (AC), it is important to develop electronic devices that work on AC power sources. At the same time, high-power energy devices require a constant DC supply for large-scale applications. Therefore, an advanced device that can sufficiently convert AC to DC has stimulated contemporary research and designing filtering capacitors is gaining research attention. For such capacitors, it is important to design electrode architectures with high electrical conductivity, minimum contact resistance and a thickness between 1 and 10 μm, which can be achieved by depositing active material directly on the current collector. Plasma-enabled techniques have the key advantage of designing electrode architectures directly on the nanostructures and providing the desired morphology and orientation, which is favorable to maximize material–electrolyte interaction and ion transport. In this work, structure-controlled carbon nanostructures were designed using a plasma-enabled deposition approach using the advantage of the plasma catalysis effect. The nanostructures were used in the electrochemistry applications as electrodes in the filtering capacitor for the AC to DC conversion. The deposited nanostructures were vertical carbon nanoforests composed of multiple carbon nanotubes. The plasma-designed electrodes delivered a high capacitance of 430 μF in the high-frequency range (100 Hz) with a phase angle of ∼ - 80°, which is excellent for filtering applications. Using such electrode architectures, a prismatic prototype was designed to test the capability of the capacitor to efficiently convert AC to DC, and the designed prototype delivered a capacitance of 12 mF at 100 Hz with long-term filtering stability (above 3 h). This excellent capacitance performance and filtering capabilities of plasma-designed carbon nanostructures open future pathways to replace conventional aluminum electrolytic capacitors for line frequency applications.

Vertical Graphene Arrays As Electrodes for Ultra‐High Energy Density AC Line‐Filtering Capacitors

Vertical Graphene Arrays with Straightaway Ions Capacitance for AC Line‐Filtering Capacitors

Vertical Graphene Arrays for AC Line-Filtering Capacitors

Rapid Preparation of All-In-One Compressible Capacitors with Flame Carbonized Melamine Foam for AC Line Filtering

Ultrafast Electrochemical Capacitors with Carbon Related Materials As Electrodes for AC Line Filtering.

An Ultrafast Supercapacitor Based on 3D Ordered Porous Graphene Film with AC Line Filtering Performance

Ultrahigh-Rate Supercapacitors Based on Eletrochemically Reduced Graphene Oxide for Ac Line-Filtering

Graphene‐Based Organic Electrochemical Capacitors for AC Line Filtering

Nitrogen-Doped Holey Graphene Film-Based Ultrafast Electrochemical Capacitors

Fiber-Shaped Electrochemical Capacitors Based on Plasma-Engraved Graphene Fibers with Oxygen Vacancies for Alternating Current Line Filtering Performance

An ultrahigh-rate electrochemical capacitor based on solution-processed highly conductive PEDOT:PSS films for AC line-filtering

Hierarchically 3D Fibrous Electrode for High‐Performance Flexible AC‐Line Filtering in Fluctuating Energy Harvesters

Graphene Ionogel Ultra‐Fast Filter Supercapacitor with 4 V Workable Window and 150 °C Operable Temperature

Aqueous hybrid electrochemical capacitors with ultra-high energy density approaching for thousand-volts alternating current line filtering

Enabling directional ion transport over graphene electrode surfaces for kilohertz electrochemical capacitors

Alternating current line-filter based on electrochemical capacitor utilizing template-patterned graphene

Hierarchical, Vertically‐Oriented Carbon Nanowall Foam Supercapacitor Using Room Temperature Ionic Liquid Mixture for AC Line Filtering with Ultrahigh Energy Density

Bridged Carbon Fabric Membrane with Boosted Performance in AC Line‐Filtering Capacitors

Direct Growth of Vertical Graphene on Fiber Electrodes and Its Application in Alternating Current Line-Filtering Capacitors

Plasma-Designed Multifunctional Carbon Electrodes for High-Frequency Line Filtering Applications

Alternatingly stacked thin film electrodes-based compact aqueous hybrid electrochemical capacitors for hundred-volts AC line filtering