Abstract:Besides reducing pollution and removing urea from wastewater, electro-oxidation of urea has also offered new prospects for filling the overall water gap for economically producing hydrogen. In this regard, a simple and low-cost electrochemical deposition technique was used to prepare a highly efficient bifunctional electrocatalyst for the HER and the UOR (in place of the OER) on nickel foam (NiFeSP/NF). A three-dimensional and nanoporous NiFeSP/NF electrocatalyst demonstrated relatively high stability and electrocatalytic activity. Notably, the bimetallic and dual-anionic NiFeSP/NF electrode demonstrated good performance for the HER (42, 111 and 138 mV at current densities of −10, −100, and −200 mA cm −2 , respectively), the OER (1.451, 1.502, 1.528, and 1.576 V vs. RHE at 10, 100, 200 and 400 mA cm −2 , respectively), and the UOR (1.304, 1.346, 1.389 and 1.473 V vs. RHE at current densities of 10, 100, 200 and 400 mA cm −2 , respectively). Moreover, the use of a NiFeSP/NF||NiFeSP/NF pair as an anode and a cathode in an overall water-splitting system assisted by urea achieved 1.348 and 1.582 V vs. RHE at 10 and 100 mA cm −2 in 1.0 M KOH with 0.33 M urea solution, which are 163 and 234 mV lower than those achieved in 1.0 M KOH alkaline solution, respectively. Additionally, the NiFeSP/NF||NiFeSP/NF pair demonstrates long-term stability (30 h) in a chronopotentiometry test at 100 mA cm −2 in 1.0 M KOH with 0.33 M urea solution. This bimetallic and dual-anionic NiFeSP electrode exhibits substantial catalytic activity due to the appropriate synergy between Fe and Ni, the modification of the electronic structure enabled by the dual anions, and the enhanced electrocatalytically active surface caused by high porosity. The low cost and single-step manufacturing method of the NiFeSP electrode, high electrocatalytic activity, and stability make it potentially ideal for commercial use in hydrogen generation and treatment of wastewater containing urea.

Interfacial Electronic Modification of Bimetallic Oxyphosphides As Multi-functional Electrocatalyst for Water Splitting and Urea Electrolysis.

Anion Modulate the Morphological and Electronic Structure of NiFe-based Electrocatalyst for Efficient Urea Oxidation-Assisted Water Electrolysis

Construction of Heterogeneous Interfaces for Water Activation and Dissociation to Synergistically Boost Overall Water Splitting

Synergism of Interface and Electronic Effects: Bifunctional N-Doped-Ni3S2/N-Doped-MoS2 Heteronanowires for Efficient Electrocatalytic Overall Water Splitting.

Interface engineering of three-phase nickel-cobalt sulfide/nickel phosphide/iron phosphide heterostructure for enhanced water splitting and urea electrolysis

Urea-oxidation-assisted electrochemical water splitting for hydrogen production on a bifunctional heterostructure transition metal phosphides combining metal–organic frameworks

Electrochemically Induced Cu-NiOOH/Cu2O/Cu Mesh Heteroarchitecture with Cu-Ni Dual Active Sites As Efficient Bifunctional Electrocatalyst for Urea-Assisted Energy-Saving Hydrogen Production in Alkaline Electrolyte

Self-derivation and Reconstruction of Silver Nanoparticle Reinforced Cobalt-Nickel Bimetallic Hydroxides Through Interface Engineering for Overall Water Splitting

Mutual promotion by structural design and intrinsic activity coupling of CNTs/MoC/CoNiMo for water splitting and urea electrolysis

Enhancing the Surface Polarization Effect Via Ni/NiMoOx Heterojunction Architecture for Urea-Assisted Hydrogen Generation

Interfacial engineering of hierarchical MoNi 4 /NiO heterostructure nanosheet arrays as bifunctional electrocatalysts for urea-assisted energy-saving hydrogen production

Multifunctional Characteristics of One-dimensional Bimetallic Oxyhydroxide Nanorods Coupled Polyaniline Interface Accelerated Water and Urea Electrolysis

Engineering CoN/Ni(OH)2 Heterostructures with Improved Intrinsic Interfacial Charge Transfer Toward Simultaneous Hydrogen Generation and Urea-Rich Wastewater Purification

Multi-interfacial Ni/Mo2C ultrafine hybrids anchored on nitrogen-doped carbon nanosheets as a highly efficient electrocatalyst for water splitting

Interface engineering assisted Fe-Ni3S2/Ni2P heterostructure as a high-performance bifunctional electrocatalyst for OER and HER

Enhancing hydrogen generation through urea electro-oxidation on a bimetallic and dual-anionic NiFeSP/NF nanostructured electrode

Interfacial Engineering of Heterostructured Fe-Ni3S2/Ni(OH)2 Nanosheets with Tailored d-Band Center for Enhanced Oxygen Evolution Catalysis

Synthesis of non-noble NiMoO4–Ni(OH)2/NF bifunctional electrocatalyst and its application in water-urea electrolysis

Hierarchical Ni3N/Ni0.2Mo0.8N Heterostructure Nanorods Arrays As Efficient Electrocatalysts for Overall Water and Urea Electrolysis

PEO-PPO-PEO induced holey NiFe-LDH nanosheets on Ni foam for efficient overall water-splitting and urea electrolysis

Low-Cost Ni2P/Ni0.96S Heterostructured Bifunctional Electrocatalyst toward Highly Efficient Overall Urea-Water Electrolysis