Abstract:An exoskeleton is a wearable device with human–machine interaction characteristics. An ideal exoskeleton should have kinematic and kinetic characteristics similar to those of the wearer. Most traditional exoskeletons are driven by rigid actuators based on joint torque or position control algorithms. In order to achieve better human–robot interaction, flexible actuators have been introduced into exoskeletons. However, exoskeletons with fixed stiffness cannot adapt to changing stiffness requirements during assistance. In order to achieve collaborative control of stiffness and torque, a bionic variable stiffness hip joint exoskeleton (BVS-HJE) is designed in this article. The exoskeleton proposed in this article is inspired by the muscles that come in agonist–antagonist pairs, whose actuators are arranged in an antagonistic form on both sides of the hip joint. Compared with other exoskeletons, it has antagonistic actuators with variable stiffness mechanisms, which allow the stiffness control of the exoskeleton joint independent of force (or position) control. A BVS-HJE model was established to study its variable stiffness and static characteristics. Based on the characteristics of the BVS-HJE, a control strategy is proposed that can achieve independent adjustment of joint torque and joint stiffness. In addition, the variable stiffness mechanism can estimate the output force based on the established mathematical model through an encoder, thus eliminating the additional force sensors in the control process. Finally, the variable stiffness properties of the actuator and the controllability of joint stiffness and joint torque were verified through experiments.

Mechanical Design and Experimental Verification of a Parallel Hip Exoskeleton with Virtual Rotation Center

Design and Experimental Verification of a Parallel Hip Exoskeleton System for Full-Gait-Cycle Rehabilitation

Design and Verification of Parallel Hip Exoskeleton Considering Output Torque Anisotropy

[Structure Design of Hip Joint Parallel Rehabilitation Exoskeleton]

Development and Validation of a Self-Aligning Knee Exoskeleton With Hip Rotation Capability

Design of an anthropomorphic lower extremity exoskeleton with compatible joints

A Unified Active Assistance Control Framework of Hip Exoskeleton for Walking and Balance Assistance

Design and optimization of a novel sagittal-plane knee exoskeleton with remote-center-of-motion mechanism

Design and Preliminary Evaluation of a Lightweight, Cable-Driven Hip Exoskeleton for Walking Assistance

Mechatronic Design and Control of a Rigid-Soft Hybrid Knee Exoskeleton for Gait Intervention

Design and Optimization of Lower Limb Rehabilitation Exoskeleton with a Multiaxial Knee Joint

Real Time Gait Planning for a Mobile Medical Exoskeleton with Crutche.

System Design and Experimental Research of Cable-driven Hip Joint Power-assisted Exoskeleton

Experimental Design Verification of a Compliant Shoulder Exoskeleton.

Design, Simulation and Kinematic Validation of a Hip Prosthetic Mechanism with a Multimotor Function

Human Hip Joint Center Analysis for Biomechanical Design of a Hip Joint Exoskeleton.

The Control System for Flexible Hip Assistive Exoskeleton

Design and analysis of a novel 12-DOF self-balancing lower extremity exoskeleton for walking assistance

Improving Walking Assist Hip Exoskeleton Torque Efficiency with Decoupling Mechanism

Design and Control of a Novel Underactuated Soft Exosuit.

Design and Evaluation of a Novel Variable Stiffness Hip Joint Exoskeleton