Abstract:Owing to its cost-effectiveness and adjustable eight-electron distribution in the 3d orbital, nickel oxide (NiO) is considered an effective electrocatalyst for an ambient electrochemical nitrogen reduction reaction (NRR). However, because of the low conductivity of the transition metal oxide electrocatalyst, its application in this field is limited. In this study, we found that the doping of NiO nanosheets with a small amount (3–10 nm) of Pt nanoparticles (Pt/NiO-NSs) leads to considerable improvements in the Faradaic efficiency (FE) and NH3 yield compared with those obtained using pure NiO, breaking the common perception that commercial Pt-based electrocatalysts demonstrate little potential for NRR due to their high hydrogen evolution tendency. In a 0.1 mol/L Na2SO4 solution at −0.2 V vs. RHE, a typical Pt/NiO-2 sample exhibits an optimum electrochemical NH3 yield of 20.59 μg h–1 mg–1cat. and an FE of 15.56%, which are approximately 5 and 3 times greater, respectively, than those of pure NiO nanosheets at the same applied potential. X-ray photoelectron spectroscopy analysis revealed that Pt in Pt/NiO-NSs exist as Pt0, Pt2+, and Pt4+ and that high-valence Pt ions are more electropositive, thereby favoring chemisorption and the activation of N2 molecules. Density function theory calculations showed that the d-band of Pt nanoparticles supported on NiO is significantly tuned compared to that of pure Pt, affording a more favorable electronic structure for NRR. The results of this study show that Pt can be an effective NRR electrochemical catalyst when loaded on an appropriate substrate. Most importantly, it provides a new synthetic avenue for the fabrication of highly active Pt-based NRR electrocatalysts.Graphical Mesoporous NiO nanosheets loaded with Pt nanoparticles were explored as electrocatalysts for nitrogen reduction reaction (NRR), providing a new synthetic avenue for fabricating highly active Pt-based NRR electrocatalysts.Download : Download high-res image (122KB)Download : Download full-size image

Pt/TiO2– nanofibrous aerogel for effective nitrogen reduction: A simple strategy for simultaneous Pt formation and TiO2– vacancy engineering

Au Sub-Nanoclusters on TiO 2 toward Highly Efficient and Selective Electrocatalyst for N 2 Conversion to NH 3 at Ambient Conditions.

Size Controllable Metal Nanoparticles Anchored on Nitrogen Doped Carbon for Electrocatalytic Energy Conversion

Modulating Nitrogen Adsorption Mode and Microenvironment of Active Sites for Boosting Electrochemical Nitrogen Reduction

In Situ Growth of Nitrogen-Doped Carbon-Coated γ-Fe<sub>2</sub>O<sub>3</sub> Nanoparticles on Carbon Fabric for Electrochemical N<sub>2</sub> Fixation

Boosting charge-transfer in tuned Au nanoparticles on defect-rich TiO 2 nanosheets for enhancing nitrogen electroreduction to ammonia production

Mesoporous MnO2 nanosheets for efficient electrocatalytic nitrogen reduction via high spin polarization induced by oxygen vacancy

Scalable and Controllable Synthesis of Pt‐Ni Bunched‐Nanocages Aerogels as Efficient Electrocatalysts for Oxygen Reduction Reaction

Oxygen vacancy engineering in spinel-structured nanosheet wrapped hollow polyhedra for electrochemical nitrogen fixation under ambient conditions

Electrocatalytic ammonia synthesis catalyzed by mesoporous nickel oxide nanosheets loaded with Pt nanoparticles

High-Performance Electrocatalytic Conversion of N-2 to NH3 Using Oxygen-Vacancy-Rich TiO2 in Situ Grown on Ti3C2Tx MXene

Porous LaFeO3 nanofiber with oxygen vacancies as an efficient electrocatalyst for N2 conversion to NH3 under ambient conditions

Engineering Pt Nanoparticles onto Resin‐Derived Iron and Nitrogen Co‐Doped Porous Carbon Nanostructure Boosts Oxygen Reduction Catalysis

Template-assisted formation of atomically dispersed iron anchoring on nitrogen-doped porous carbon matrix for efficient oxygen reduction

Ordered mesoporous Fe2N electrocatalysts with regulated nitrogen vacancy for oxygen reduction reaction and Zn-air battery

Charge transfer and vacancy engineering of Fe2O3 nanoparticle catalysts for highly selective N2 reduction towards NH3 synthesis

Boosting nitrogen electrocatalytic fixation by three-dimensional TiO2−δNδ nanowire arrays

In Situ Growth Of Nitrogen-Doped Carbon-Coated Gamma-Fe2o3 Nanoparticles On Carbon Fabric For Electrochemical N-2 Fixation

Modulating Oxygen Vacancies of TiO2 Nanospheres by Mn-Doping to Boost Electrocatalytic N2 Reduction

Synergistic Electrocatalytic Nitrogen Reduction Enabled by Confinement of Nanosized Au Particles Onto a Two-Dimensional Ti3C2 Substrate.

Atomically dispersed Ni anchored on polymer-derived mesh-like N-doped carbon nanofibers as an efficient CO2 electrocatalytic reduction catalyst