Abstract:Laser-based diagnostic techniques are critical nonintrusive methods of measuring the in-situ temperature in combustion flow fields. Developing temperature measurement techniques with high accuracy and precision is of great significance for studying the combustion. At present, nanosecond (ns) lasers are commonly used in these methods. However, the researches based on femtosecond (fs) lasers are relatively few. Here, we develop a thermometry technique for combustion fields based on fs laser-induced filament. When the fs laser propagates in an optical medium, a long uniformly distributed plasma channel (also named filament) will be generated. The clamped intensity inside the filament is high enough to generate excited atoms/molecules through fs laser-induced photochemical reactions. Subsequently, the excited atoms/molecules release fluorescence signals. The length of the filament can be measured by imaging the fluorescence signal with an ICCD camera, which is evaluated by the full width at half maximum (FWHM) of the spatial distribution of the filament emission signal. Based on theoretical analysis, the experimental data of the filament length are fitted with a power function, and the result is satisfactory compared with the R-squared measure of goodness (R2) of 0.984. This indicates that the filament length is correlated well with the temperature of the combustion field. A monotonic quantitative relationship between the filament length and the temperature can be established by a calibration process, and then the temperature of the combustion field can be measured. When the temperature changes from 1630 to 2007 K, the length of the filament shortens by 38%. This indicates that the filament length is sensitive to the temperature of the flow field. When the temperature is 2007 K, the absolute uncertainty of the measurement is ±25 K, and the relative uncertainly is about 1.2%. The spatial resolution of the measurement system is 50 μm, which was determined by a USAF 1951 Target. Based on the spatial resolution, the measurement precision can arrive at 17 K. Although, at present, this temperature measurement technique based on femtosecond laser-induced filament is used only in laminar premixed flames, it has potential applications in temperature measurements ranging from room temperature to combustion temperatures.

Device and method for shortening length of filament of femtosecond laser in air

Spatial-Temporal Distortions And Calibration Of Ultrashort Pulses In Complex Optical Systems

Vector-dispersion Compensation and Pulse Pedestal Cancellation in a Femtosecond Nonlinear Amplification Fiber Laser System.

Extending femtosecond laser superfilamentation in air with a multifocal phase mask

Femtosecond Laser Nano-Fabrication With Extended Processing Range

Sensing with Femtosecond Laser Filamentation

Filamentation and Temporal Reshaping of A Femtosecond Pulse in Fused Silica

Extending Optical Filaments with Phase-Nested Laser Beams

Acoustic Diagnostics of Femtosecond Laser Filamentation

Single-beam femtosecond probe for diagnosing laser plasma parameters

Femtosecond laser micromachining optical devices

Enhanced detection stability in femtosecond time resolution transient absorption system from a tight-focusing filamentation

Analysis of laser polarization state on remote induced plasma luminescence characteristics of filament in air

LASER DIRECT WRITING OF LONG PERIOD FIBER GRATING BY 800 NM FEMTOSECOND LASER PULSES

Mechanism and Experimental Study of Femtosecond-Laser Super-Resolution Processing Based on Beam Shaping Technology

Features of Femtosecond Laser Radiation Filamentation in Air under Aberration Focusing

Temperature Measurement in Combustion Flow Field with Femtosecond Laser-Induced Filament

Sub-ppb aerosol detection at a distance of 30 meters by millijoule femtosecond laser pulse filamentation in air

Study of achromatic beamline design for laser-driven femtosecond electron beams

Filamentation of interacting femtosecond laser pulses in air