Abstract:Sulfur- and nitrogen-containing organic industrial wastewaters, which primarily result from several processes, including pharmaceutical, slaughter, papermaking, and petrochemical processes, are typical examples of refractory wastewaters. To ensure resource utilization, sulfur compounds at high concentrations in such wastewaters can be converted to elemental sulfur through specific methods. Specifically, the denitrifying sulfide removal (DSR) process can be employed to effectively recover elemental sulfur via biological sulfide oxidation, and reportedly, bio-augmentation presents as an effective strategy by which the challenges that limit the application of the DSR process can be overcome. However, the bacterial loss resulting from microorganism activity inhibition owing to toxic effect of high sulfide concentration as well as the complexity of the organic matter (carbon source) in actual wastewater environments reduce the actual elemental sulfur production rate. In this regard, the bio-augmentation effect of adding fillers under complex carbon source conditions was studied. The structure and function of the microbial community on the surface of the fillers were also analysed to reveal the internal factors that contributed to the increased efficiency of elemental sulfur generation. The results obtained showed that relative to the control, elemental sulfur generation increased 1.5- and 2-fold following the addition of fillers and fillers with microbial inoculants, respectively. Further, in the reactor with the added filler, the dominant bacteria in the biofilm on the filler surface were Pseudomonas and Azoarcus, while in reactor with added fillers plus microbial inoculates, the dominant bacteria in the biofilm on the filler surface were Pseudomonas and Arcobacter. These findings indicated that bio-augmentation promoted the expression of sulfur oxidation functional genes. Furthermore, adding Pseudomonas sp. gs1 for bio-augmentation improved the impact load resistance of the biofilm on the surface of the filler, leading to the rapid restoration of the elemental sulfur generation rate after the impact.

Mixotrophic Denitrification Processes Based on Composite Filler for Low Carbon/nitrogen Wastewater Treatment

Nitrite Accumulation in Continuous-Flow Partial Autotrophic Denitrification Reactor Using Sulfide As Electron Donor.

Denitrification Performance in Packed-Bed Reactors Using Novel Carbon-Sulfur-Based Composite Filters for Treatment of Synthetic Wastewater and Anaerobic Ammonia Oxidation Effluent

Bio-augmentation of the filler-enhanced denitrifying sulfide removal process in expanded granular sludge bed reactors

Study of Nitrogen Removal Efficiency of the Filled Bed Reactors Using Alkali-Treated Corncobs-Sulfur (mixotrophic) for Treating the Effluent from Simulated Urban Wastewater Plants

Micro-electrolysis/retinervus luffae-based simultaneous autotrophic and heterotrophic denitrification for low C/N wastewater treatment

Nitrate Removal from Actual Wastewater by Coupling Sulfur-Based Autotrophic and Heterotrophic Denitrification under Different Influent Concentrations

Agriculture Waste as Slow Carbon Releasing Source of Mixotrophic Denitrification Process for Treating Low C/N Wastewater

Biological denitrification performance of a novel sulfur-slow-release carbon source mixed filler

A novel sulfur autotrophic denitrification in-situ coupled sequencing batch reactor system to treat low carbon to nitrogen ratio municipal wastewater: Performance, niche equilibrium and pollutant removal mechanisms

Sulfur-based Mixotrophic Denitrification: A Promising Approach for Nitrogen Removal from Low C/N Ratio Wastewater

Mixotrophic denitrification using pyrite and biodegradable polymer composite as electron donors

Denitrification Performance and Microbial Communities of Solid-Phase Denitrifying Reactors Using Poly (butylene Succinate)/bamboo Powder Composite.

Integrating sulfur, iron(II), and fixed organic carbon for mixotrophic denitrification in a composite filter bed reactor for decentralized wastewater treatment: Performance and microbial community

[Combined Process of DNBF-O3-GAC for Nitrogen and Phosphorus and Metabolite Advanced Removal]

Enhancing anoxic denitrification of low C/N ratio wastewater with novel ZVI composite carriers

Denitrification performance of sulfur-based autotrophic denitrification and biomass‐sulfur-based mixotrophic denitrification in solid-phase denitrifying reactors using novel composite filters

In-situ fermentation coupling with partial-denitrification/anammox process for enhanced nitrogen removal in an integrated three-stage anoxic/oxic (A/O) biofilm reactor treating low COD/N real wastewater

Fe-C wrapped in polyurethane sponge cubes tied in anoxic zones to enrich multiple denitrifying bacteria enhancing wastewater nitrogen removal

Enhanced Microbial Metabolism in One Stage Partial Nitritation-Anammox System Treating Low Strength Wastewater by Novel Composite Carrier.

Preparation and optimization of sulfur ferrous inorganic carbon composite filler for autotrophic denitrification nitrogen and phosphorus removal