Abstract:Magnesium alloy, as a new material for vascular stents, possesses excellent mechanical properties, biocompatibility, and biodegradability. However, the mechanical properties of magnesium alloy stents exhibit relatively inferior performance compared to traditional metal stents with identical structural characteristics. Therefore, improving their mechanical properties is a key issue in the development of biodegradable magnesium alloy stents. In this study, three new stent structures (i.e., stent A, stent B, and stent C) were designed based on the typical structure of biodegradable stents. The changes made included altering the angle and arrangement of the support rings to create a support ring structure with alternating large and small angles, as well as modifying the position and shape of the link. Using finite element analysis, the compressive performance, expansion performance, bending flexibility performance, damage to blood vessels, and hemodynamic changes of the stent were used as evaluation indexes. The results of these comprehensive evaluations were utilized as the primary criteria for selecting the most suitable stent design. The results demonstrated that compared to the traditional stent, stents A, B, and C exhibited improvements in radial stiffness of 16.9%, 15.1%, and 37.8%, respectively; reductions in bending stiffness of 27.3%, 7.6%, and 38.1%, respectively; decreases in dog-boning rate of 5.1%, 93.9%, and 31.3%, respectively; as well as declines in the low wall shear stress region by 50.1%, 43.8%, and 36.2%, respectively. In comparison to traditional stents, a reduction in radial recoiling was observed for stents A and C, with decreases of 9.3% and 7.4%, respectively. Although there was a slight increase in vessel damage for stents A, B, and C compared to traditional stents, this difference was not significant to have an impact. The changes in intravascular blood flow rate were essentially the same after implantation of the four stents. A comparison of the four stents revealed that stents A and C exhibited superior overall mechanical properties and they have greater potential for clinical application. This study provides a reference for designing clinical stent structures.

Finite Element Analysis of the Mechanical Performance of a Zinc Alloy Stent with the Tenon-and-mortise Structure

Computational biomechanics and experimental verification of vascular stent

Design and Mechanical Performance Evaluation of WE43 Magnesium Alloy Biodegradable Stents via Finite Element Analysis

[Mechanical Analysis on a New Type of Biodegradable Magnesium-Alloy Stent].

Mechanical Analysis of New Type Biodegradable Metal Stents Based on FEM

Optimized design and biomechanical evaluation of biodegradable magnesium alloy vascular stents

Improvement of Mechanical Performance of Bioresorbable Magnesium Alloy Coronary Artery Stents Through Stent Pattern Redesign

Design of a high performance vascular stent with asymmetric structures

Optimizing structural design on biodegradable magnesium alloy vascular stent for reducing strut thickness and raising radial strength

A Biodegradable Magnesium Alloy Vascular Stent Structure: Design, Optimisation and Evaluation.

Finite Element Simulation of Coronary Stent Expansion Process

Design of Biodegradable Mg Alloy Implants with Finite Element Analysis

Magnesium Alloy Stent Expansion Behavior Simulated by Finite Element Method

In vivo and in vitro evaluation of a biodegradable magnesium vascular stent designed by shape optimization strategy

Optimizing the compression resistance of low-nickel stainless steel coronary stents using finite element and response surface methodology

Analysis of the Whole Implementation Process and Optimization of a Nitinol Superelastic Stent

Finite Element Analysis for Fatigue Behaviour of a Self-Expanding Nitinol Peripheral Stent under Physiological Biomechanical Conditions.

Methods for improving the properties of zinc for the application of biodegradable vascular stents

Analysis of the Compression Process and Dimensional Optimization of Self‐expanding Stent of a Nickel Titanium Alloy

Computational and Experimental Investigation into Mechanical Performances of Poly-L-Lactide Acid (PLLA) Coronary Stents

Chiral Constrained Stent: Effect of Structural Design on the Mechanical and Intravascular Stent Deployment Performances