Abstract:A stable and high efficiency Li metal anode (LMA) is critical rechargeable Li metal batteries (LMBs), including the batteries with various cathodes such as ion intercalation compounds and conversion materials (such as sulfur and oxygen). An ideal metal anode not only needs to have a very high Coulombic efficiency (CE), but also need to have a low concentration, high conductivity and low cost. [1-2] During the last a few years, various methods have been used to prevent dendrite growth and improve CE of LMA, including used of high concentration electrolytes (HCEs) Localized High-Concentration Electrolytes (LHCE) by diluting HCEs with electrochemically “inert” solvents or poorly solvating diluents. [3] However, the fundamental mechanism behind the stability of LMA in non-aqueous electrolyte is still not well understood. This work will report our recent investigations on the interaction between LMA and various non-aqueous electrolytes. Although LMA is kinetically unstable with non-aqueous electroltye, appropriate selection of non-aqueous electrolyte, including both salt and solvent will enable formation of a more stable SEI layer on LMA surface and largely minimize the side reaction between LMA and electrolyte, therefore enable a dynamically stable LMA for long term cycling of li metal batteries. Several high performance electrolytes that are stable at ~4.5V with a CE of more than 99.2% have enabled long term cycling of LMBs and will also be reported in this work. S. Whittingham, "History, Evolution, and Future Status of Energy Storage", proceedings of the IEEE(Volume: 100, Issue: Special Centennial Issue , May 13 2012). -G. Zhang, W. Xu and W. A., Henderson, Lithium Metal Anode and Rechargeable Li Metal Batteries. (Springer International Publishing), 249, (2017). Shuru Chen, Jianming Zheng, Donghai Mei, Kee Sung Han, Mark H. Engelhard, Wengao Zhao, Wu Xu, Jun Liu and Ji-Guang Zhang,” Mater. 2018, 30, 1706102.

The Fundamental Mechanism Behind the Stability of Li Metal Anodes in Non-Aqueous Electrolytes