Abstract:A porous composite of Si@rGO@C‐SD‐AlO has been fabricated by using a precursor induced assembly strategy and combined with the spray drying and an atomic layer deposition process. Protonated chitosan plays the dual roles of inducer for the assembly of graphene oxide sheets and the precursor for amorphous carbon. The composite can be used as a high‐performance anode for lithium‐ion batteries and it shows superior electrochemical performance, for example, excellent multiplicative performance (806 mAh g−1 at 5000 mA g−1), preferable initial Coulomb efficiency (up to 76.7%), high reversible capacity (1477 mAh g−1 after 500 cycles at 500 mA g−1), and excellent long‐cycle cycling stability (930 mAh g−1 after 1000 cycles at 1000 mA g−1). The theoretical capacity of pristine silicon as anodes for lithium‐ion batteries (LIBs) can reach up to 4200 mAh g−1, however, the low electrical conductivity and the huge volume expansion limit their practical application. To address this challenge, a precursor strategy has been explored to induce the curling of graphene oxide (GO) flakes and the enclosing of Si nanoparticles by selecting protonated chitosan as both assembly inducer and carbon precursor. The Si nanoparticles are dispersed first in a slurry of GO by ball milling, then the resulting dispersion is dried by a spray drying process to achieve instantaneous solution evaporation and compact encapsulation of silicon particles with GO. An Al2O3 layer is constructed on the surface of Si@rGO@C‐SD composites by the atomic layer deposition method to modify the solid electrolyte interface. This strategy enhances obviously the electrochemical performance of the Si as anode for LIBs, including excellent long‐cycle stability of 930 mAh g−1 after 1000 cycles at 1000 mA g−1, satisfied initial Coulomb efficiency of 76.7%, and high rate ability of 806 mAh g−1 at 5000 mA g−1. This work shows a potential solution to the shortcomings of Si‐based anodes and provides meaningful insights for constructing high‐energy anodes for LIBs.

A novel two-dimensional binder based on functionalized-graphene oxide for high performance Si anodes of Li ion batteries

Advanced Inorganic Lithium Metasilicate Binder for High-Performance Silicon Anode.

Inorganic/organic Composite Binder with Self-Healing Property for Silicon Anode in Lithium-Ion Battery

Three-dimensional Dual-Layered Conductive Binder Enables Stable and High Performance of SiOx/C Anodes

A novel multi-functional binder based on double dynamic bonds for silicon anode of lithium-ion batteries

Three-dimensional Carbon-Coated Si/rGO Nanostructures Anchored by Nickel Foam with Carbon Nanotubes for Li-ion Battery Applications

In Situ Room-Temperature Cross-Linked Highly Branched Biopolymeric Binder Based on the Diels–Alder Reaction for High-Performance Silicon Anodes in Lithium-Ion Batteries

Highly adhesive and stretchable binder for silicon-based anodes in Li-ion batteries

Rational design of trifunctional conductive binder for high-performance Si anodes in lithium-ion batteries

An Elastic Cross-Linked Binder for Silicon Anodes in Lithium-Ion Batteries with a High Mass Loading

A Novel Gelatin Binder with Helical Crosslinked Network for High-Performance Si Anodes in Lithium-Ion Batteries

Nickel ion-anchored helical braided binder network with soft-rigid synergy and self-recovery ability for high-performance silicon anode

Self-assembly Silicon/porous Reduced Graphene Oxide Composite Film As a Binder-Free and Flexible Anode for Lithium-Ion Batteries

Binder-Free, Flexible, and Self-Standing Non-Woven Fabric Anodes Based on Graphene/Si Hybrid Fibers for High-Performance Li-Ion Batteries

A nature-inspired binder with three-dimensional cross-linked networks for silicon-based anodes in lithium-ion batteries

A Novel Graphene Based Bi-Function Humidity Tolerant Binder for Lithium-Ion Battery

A Semi-fluid Multi-functional Binder for High-performance Silicon Anode of Lithium-Ion Batteries

Resilient binder network with enhanced ionic conductivity for High-Areal-Capacity Si-based anodes in Lithium-Ion batteries

Cross-Linkable Binders for Si Anodes in High-Energy-Density Lithium-Ion Batteries

Precursor Induced Assembly of Si Nanoparticles Encapsulated in Graphene/Carbon Matrices and the Influence of Al2O3 Coating on their Properties as Anode for Lithium‐Ion Batteries

A Flexible and Conductive Binder with Strong Adhesion for High Performance Silicon‐Based Lithium‐Ion Battery Anode