Abstract:This work presents an ultrasound tomography imaging system and method for quantitative mapping of the sound speed in liquid masses. It is highly desirable to be able to inspect vessel fluid mass distribution, notably in the chemical and food industrial operations. Optimization of industrial reactors has been crucial to the improvement of industrial processes. There is a great need to investigate how and if tomographic imaging sensors could aid the automatic control of these process tanks. Single-measurement ultrasound techniques and especially spectrometric methods have been a subject of study of industrial applications. Tomographic systems provide key multi-dimensional and spatial information when compared to the well-established single-channel measurement system. Recently, ultrasound tomography has attracted a great deal of interest in a wide spectrum of industrial applications. The system has been designed as 32 piezoelectric ring-array positioned in a 30 cm tank, with an excitation frequency of 40 kHz. Two-dimensional transmission travel-time tomography was developed to reconstruct the fluid mass distributions. Prior experiments are mainly based on inclusions of a few centimetres and on a liquid solution of different concentrations. They have been conducted to test the spatial and quantitative resolution of the ultrasound imaging device. Analysing the reconstructed images, it is possible to provide accurate spatial resolution with low position errors. The system also demonstrated inclusion movement with a temporal resolution of 4 frames per second (fps) in dynamical imaging sense. Sound velocity quantitative imaging was developed for the investigation of ultrasonic propagation in different liquids. This work, for the first time, shows how quantitative sound velocity imaging using transmission mode time of flight data could be used to characterize liquid density distribution of industrial reactors. The results suggest that ultrasound tomography can be used to quantitatively monitor important process parameters.

Quantitative Sound Velocity Reconstruction Based on Ultrasonic Tomography

A Quantitative Ultrasonic Travel-Time Tomography to Investigate Liquid Elaborations in Industrial Processes

3-D Ultrasonic Image Reconstruction in Frequency Domain Using a Virtual Transducer Model.

Frequency Domain Synthetic Aperture Focusing Technique for Variable-Diameter Cylindrical Components.

Water Temperature Reconstruction Via Station Position Correction Method Based on Coastal Acoustic Tomography Systems.

Flow Current Field Observation with Underwater Moving Acoustic Tomography

Simultaneous Reconstruction of Gas Concentration and Temperature Using Acoustic Tomography

Wavenumber-Domain Fast Reconstruction Technique Using Ultrasonic Scanning for Transverse Wave Imaging

Simultaneous Measurement of Local Longitudinal and Transverse Wave Velocities, Attenuation, Density, and Thickness of Films by Using Point-Focus Ultrasonic Spectroscopy

Simultaneous Thickness, Velocity, Density, and Attenuation Measurement of a Thin Layer by Time-Resolved Acoustic Microscopy

A Triple-Modality Ultrasound Computed Tomography Based on Full-Waveform Data for Industrial Processes

Investigation Of Microwave Tomographic Imaging Techniques For Industrial Processes

Nonlinear Ultrasonic Transmissive Tomography for Low-Contrast Biphasic Medium Imaging Using Continuous-Wave Excitation

3D Wave-Equation-Based Finite-Frequency Tomography for Ultrasound Computed Tomography

Simultaneously Measuring Thickness, Density, Velocity and Attenuation of Thin Layers Using V(z,t) Data from Time-Resolved Acoustic Microscopy.

An Improved Method for Quantitative Recovery of Conductivity Using Tomographically Measured Thermoacoustic Data

Real-time imaging based quantification of microbubbles concentration and velocity vector quality evaluation using texture analysis method for ultrasonic particle image velocimetry technique

Transmission/Reflection Dual-mode Ultrasonic Tomography using Weighted Least Square-Lagrange Joint Reconstruction

Quantitative microwave-induced thermoacoustic microscopy

Application of Ultrasound Velocity to Emulsion Concentration Inspection

Supercomputer Simulations of Ultrasound Tomography Problems of Flat Objects