Abstract:Organometal trihalide perovskites are emerging as a new generation of photovoltaic materials. They are abundant in nature and have rapidly increasing power conversion efficiencies (PCE) of above 15% in common hybrid (mixed organic/inorganic) thin-film-based solar cells.1–3 Up to now, perovskite films have been formed by film deposition approaches such as spin-coating, sequential deposition of the inorganic and organic precursor, and co-evaporation of the precursors.1, 2 Low-temperature solution processes are among the simplest ways to fabricate planar low-cost photovoltaic devices. However, perovskite crystallizes very rapidly, so it is very challenging to form uniform, continuous, and leakage-free perovskite films by solution methods.2 We developed two simple and effective low-temperature solution processes to fabricate high-efficiency perovskite devices (see Figure 1). In the first approach, we studied the influence of the ratio of the precursors methylammonium iodide (CH3NH3I) and lead iodide (PbI2) in a premixed solution. 3 We found that using a non-stoichiometric precursor solution (i.e., not in a simple ratio) was critical to forming stoichiometric (i.e., in a simple ratio) perovskite films. The compositions of the spun perovskite films were very sensitive to the substrate surface, and could be very different from those of the precursor solutions. We varied the composition of the precursor solution, and found a PbI2/CH3NH3Xmolar ratio of 0.6–0.7 gave the best surfacemorphology and electronic properties, such as doping concentration. We used a planar heterojunction device structure of ITO/ PEDOT:PSS/(CH3NH3I)/PCBMor ICBA/C60/BCP/aluminum, where ITO is a substrate of indium tin oxide, PEDOT:PSS is an electron-donating transparent conductive polymer, PCBM and ICBA are fullerene-derived electron acceptors, C60 is buckminsterfullerene (a spherical fullerene molecule), and BCP is 2,9-dimethyl-4,7-diphenyl-1,10-phenanthroline, an electrontransporting but hole-blocking layer. Figure 1. Schematic of the prepation of perovskite films by (a) spin coating of pre-mixed precursor of lead iodide (PbI2) and methylammonium iodide (CH3NH3I) and (b) an interdiffusion approach. ITO: Indium tin oxide, a transparent conducting oxide. PEDOT:PSS: A transparent, conductive polymer. MAI: Methylammonium iodide. MAPbI3 Methylammonium lead iodide.

Method for preparing thermal-stability perovskite CsPbI3 by dual-amino organic matter

Antisolvent Engineering On Low-Temperature Processed Cspbi3 Inorganic Perovskites For Improved Performances Of Solar Cells

Thermal engineering control of inorganic perovskite CsPbIBr2 film and optimization of photoelectric performance

Efficient and Stable β-CsPbI 3 Solar Cells through Solvent Engineering with Methylamine Acetate Ionic Liquid

Preparation method of organic-inorganic hybrid perovskite thin film

Preparing High-Efficiency Perovskite Solar Cells

Extracting ammonium halides by solvent from the hybrid perovskites with various dimensions to promote the crystallization of CsPbI3 perovskite

Bifunctional Stabilization of All-Inorganic Α-Cspbi3 Perovskite for 17% Efficiency Photovoltaics.

Reactive Inhibition Strategy for Triple‐cation Mixed‐halide Perovskite Ink with Prolonged Shelf‐life

Low temperature-processed stable and high-efficiency carbon-based CsPbI2Br perovskite solar cells by additive strategy

Enhancing the Stability of Perovskite Solar Cells through an Iodine Confining Strategy

Low temperature preparation of all-inorganic CsPbI3 perovskite solar cells with ethanediamine as additive

Addictive-Assisted Construction Of All-Inorganic Cssnibr2 Mesoscopic Perovskite Solar Cells With Superior Thermal Stability Up To 473 K

Amino acid salt Induced PbI2 crystal orientation Optimization for High-Efficiency Perovskite Solar Cells with Long-Term Stability

Efficient Stabilization and Passivation for Low-Temperature-Processed γ-CsPbI 3 Solar Cells

Vacuum-Assisted Thermal Annealing of CH3NH3PbI3 for Highly Stable and Efficient Perovskite Solar Cells

Antisolvent‐Free Heterogenous Nucleation Enabled by Employing 4‐Tert‐Butyl Pyridine Additive and Two‐Step Annealing for Efficient CsPbI2Br Perovskite Solar Cells

Enhancement of thermal stability for perovskite solar cells through cesium doping

High performance and stability of perovskite solar cells achieved through anti-solvent modulation of multi-orientation PbI 2 and stress relief

Self-Sacrificed Additive in Preparing PbI2 Film Enables the Oriented Growth of Perovskite Crystals for Improved Solar Cell Performance

Low-Temperature Removal of Residual Dimethylammonium via Surface Molecular Oligomerization for CsPbI 3 Perovskite Solar Cells