Abstract:The effect of shear stress on strain development and pore water accumulation resulting from principal stress rotation tests on intact Hangzhou soft clay using a Zhejiang University hollow cylinder apparatus (ZJU-HCA) is reported. Different types of tests were designated, including a shearing test along the fixed principal stress direction, a pure rotation test, and both clockwise and anti-clockwise rotation tests. The mean principal stress was kept constant in all tests. The intermediate principal stress coefficient (b) was set to 0.5. The pore pressure coefficient, deduced using a double yield surface theory, revealed that the volume yield surface function was not affected by the rotation of the principal stress axes. The pore water pressure in the fixed principal stress direction test and in the pure rotation test was shown to be mainly controlled by the shear stress level. As the results revealed that the anticlockwise rotation would have a higher effect on pore water pressure than clockwise rotation, the pore water pressure generated in the clockwise rotation test was relatively small. Because b was set to 0.5, the radial strain was very small. The development of the axial strain was symmetrical to the circumferential strain, which coincided with the horizontal symmetry of the axial stress and circumferential stress. Both the shear stress level and rotation angle have a pronounced effect on strain development. When soil subjected to pure principal stress rotation under the conditions of high stress levels, large strains would be expected and any underestimation will lead to insecurity. If the specimen experienced a preceding rotation, its influence on the strain development in the subsequent rotation was significant. The variation of octahedral shear stiffness G(oct) with rotation angle also demonstrated the deterioration of the preceding rotation in the following rotation.

True Triaxial Tests on Natural Shanghai Clay

Influence of Intermediate Principal Stress and Principal Stress Direction on Drained Behavior of Natural Soft Clay

Experimental Investigation on Mechanical Behavior of Natural Soft Clay by True Triaxial Tests

Strength Property Of Shanghai Clay In True Triaxial Tests

Impact of Shear Stress on Strain and Pore Water Pressure Behavior of Intact Soft Clay under Principal Stress Rotation

Deformation of Intact Soft Clay under Principal Stress Rotation with Effect of Intermediate Principal Stress

Study On Strength Of Shanghai Marine Clay By True Triaxial Test

Experimental Study on Shear Strength Considering Initial Void Ratio and Plasticity Index

Microstructure Behavior Of Intact Soft Clay After Principal Stress Rotation

Shear strength characteristics of an unsaturated expansive clay

Undrained Anisotropy and Non-Coaxial Behavior of Clayey Soil under Principal Stress Rotation

Preliminary Study on Small-Strain Triaxial Testing Method for Soft Shanghai Clays

Intact soft clay responses to cyclic principal stress rotation in undrained Condition

Experimental Study of Stress-Strain Properties of Intact Soft Clay Considering the Change of Principal Stress Direction

Study of Failure Criterion for Hangzhou Intact Soft Clay under Complex Stress Path

Intact soft clay’s critical response to dynamic stress paths on different combinations of principal stress orientation

Structure of Artificial Soils and Its Influence on Strain Localization

STUDY OF INFLUENCE OF PARAMETERS OF INTERMEDIATE PRINCIPAL STRESS AND PRINCIPAL STRESS DIRECTION ON ANISOTROPY OF INTACT CLAY

Research on strength and pore pressure of intact clay considering variation of principal stress direction

Anisotropic and Noncoaxial Behavior of K0-Consolidated Soft Clays under Stress Paths with Principal Stress Rotation

Undrained Cyclic Triaxial Behavior of Saturated Clays under Variable Confining Pressure