Abstract:Efficiencies of all-perovskite tandem solar cells are dominantly constrained by the challenges pertaining to defects and stability within tin-lead (Sn-Pb) perovskite sub-cells. On top of the well-studied oxygen oxidation, defects related to iodide and the consequent generation of I2 upon light illumination pose significant degradation risks, leading to Sn2+ -> Sn4+ oxidation. To address this, we screen phenylhydrazine cation (PEH+)-based additives of varying polarities, which strongly coordinate with Sn for reinforcing the Sn-I bond, and interacting electrostatically with negatively charged defects (VSn, VFA, ISn, and I-i). The synergistic effects suppress the photo-induced formation of I2 and the subsequent oxidation of Sn-Pb perovskites, circumventing the stability concerns of narrow bandgap (NBG) perovskite solar cells (PSCs) under operational conditions. The reducing agent 2-mercaptobenzimidazole (MBI) was further introduced into the precursor solution, which not only demonstrates strong resistance to oxygen erosion, but also reduces the deep-level defect density of the Sn-Pb perovskites. Consequently, single-junction Sn-Pb cells achieve a champion efficiency of 23.0%. The enhanced light stability allows these cells to retain 89.4% of their initial efficiency after 400 hours of continuous operation, as assessed by tracking the maximum power point (MPP). We further integrated the Sn-Pb perovskite into a two-terminal (2T) monolithic all-perovskite tandem cell and achieved a PCE of 27.9% (27.2% certified). Meanwhile, the encapsulated tandem device maintained 90.3% of its initial PCE after 300 h through MPP tracking. The work offers new ideas for tackling the stability issues related to light-triggered oxidation. This study showed PEHCl-CN can enhance the strength of Sn-I, resulting in good light stability. The subsequent doping of MBI resulted in good air stability. This enables the integrated 2T all-perovskite device to achieve an efficiency of 27.9%.

Improving Photovoltaic Performance of Pb‐Less Halide Perovskite Solar Cells by Incorporating Bulky Phenylethylammonium Cations

Enhanced Crystallization and Optimized Morphology of Perovskite through Doping Indium-Based Metal-Organic Assembly: Achieving Significant Solar Cell Efficiency Enhancements

Ammonium Additive Engineering in Antisolvents for Improving Perovskite/Charge-Transport-Layer Interfaces Toward Efficient Lead-Tin Alloyed Perovskite Solar Cells

High Efficiency Quasi‐2D/3D Pb–Ba Perovskite Solar Cells via Phenethylammonium Chloride Addition

Realizing High Efficiency over 20% of Low‐Bandgap Pb–Sn‐Alloyed Perovskite Solar Cells by in Situ Reduction of Sn4+

Multifunctional anion-cation modulation engineering for Sn-Pb perovskite solar cells

Designing Heterovalent Substitution with Antioxidant Attribute for High‐Performance Sn‐Pb Alloyed Perovskite Solar Cells

Power Conversion Efficiency Enhancement of Low-Bandgap Mixed Pb–Sn Perovskite Solar Cells by Improved Interfacial Charge Transfer

Recent Advances in Pb–Sn Mixed Perovskite Solar Cells

Enhancing Photostability of Sn‐Pb Perovskite Solar Cells by an Alkylammonium Pseudo‐Halogen Additive

Enhanced efficiency of perovskite solar cells by PbS quantum dot modification

Substitution of Ethylammonium Halides Enabling Lead-Free Tin- Based Perovskite Solar Cells with Enhanced Efficiency and Stability

Tin and Mixed Lead–Tin Halide Perovskite Solar Cells: Progress and their Application in Tandem Solar Cells

Efficient MA-free Pb-Sn alloyed low-bandgap perovskite solar cells via surface passivation

Optimization of open circuit voltage and stability of Sn–Pb mixed perovskite solar cells by phenyl–ethyl ammonium bromide

Lead-lean and MA-free perovskite solar cells with an efficiency over 20%

Decoupling Light- and Oxygen-Induced Degradation Mechanisms of Sn-Pb Perovskites in All Perovskite Tandem Solar Cells

Accelerated Interfacial Electron Transfer in Perovskite Solar Cell by Ammonium Hexachlorostannate Modification and Fs-Tas Investigation

Efficient Environment-friendly Lead-free Tin Perovskite Solar Cells Enabled by Incorporating 4-Fluorobenzylammonium Iodide Additives

Enhancing the Electronic Properties and Stability of High-Efficiency Tin-Lead Mixed Halide Perovskite Solar Cells via Doping Engineering

Multifunctional Regulation of Highly Orientated Tin–Lead Alloyed Perovskite Solar Cells