Abstract:The development of phase change materials (PCMs) is hampered by issues like leakage, poor thermal conductivity, and poor light absorption. In this study, we innovatively combined modified melamine foam (MF) and graphene nanoparticle (GNP) to address these defects of PCMs in the solar-thermal energy system. The MF was modified to endow the solar-thermal energy conversion ability and superhydrophobic interface characteristics due to the polypyrrole (PPy) by the in-situ polymerization and the polymerized octadecylsiloxane (PODS) layer coating on the sponge skeleton. The composite PCMs consisting of the modified MF, paraffin wax (PW), and GNP were fabricated and exhibited good leakproof ability, high thermal conductivity, and excellent solar-thermal energy conversion capability. Results showed that due to the effects of the PPy and the PODS on the sponge skeleton structure, MF@PPy-PODS/PW composite PCMs showed a decrease in the mass loss ratio to less than 0.34% and an increase in the thermal conductivity of 0.33 W/m·K and the solar-thermal storage efficiency of 75.68%. Besides, adding GNP with higher concentrations impacted positively on the thermal conductivity and the solar-thermal energy conversion ability but negatively on the phase change enthalpies. MF@PPy-PODS/GNP3/PW composite PCMs increased the thermal conductivity to 0.59 W/m·K and the solar-thermal storage efficiency to 79.36% while decreasing the phase change enthalpy to 130.61 J/g. Furthermore, a thermoelectric conversion system driven by solar energy was developed to show the potential of composite PCMs for cleaner energy production. The open-circuit voltages of the MF@PPy-PODS/GNP3/PW composite PCMs achieved 0.78 and 0.91 V at 2 and 4 Sun, respectively. The open-circuit voltages remained for a period of time and slowly dropped without the simulated solar light irradiation. This study provided a potential strategy for the optimal performance of composite PCMs and their application in solar thermal systems.

Polyethylene Glycol/modified Carbon Foam Composites for Efficient Light-Thermal Conversion and Storage

Ti3C2Tx@Polyvinyl alcohol foam-Supported Phase Change Materials with Simultaneous Enhanced Thermal Conductivity and Solar-Thermal Conversion Performance

Porous carbon network-based composite phase change materials with heat storage capacity and thermal management functions

Thermal conductivity enhancement of polyethylene glycol/NF composite as stabilized phase change materials for thermal energy storage

Shape-stabilized nanosilver-modified grapefruit peel-based porous carbon composite phase change material with high thermal conductivity, photothermal conversion performance and thermal management capability

Biomass homogeneity reinforced carbon aerogels derived functional phase‐change materials for solar‐thermal energy conversion and storage

Light-thermal-electric energy conversion based on polyethylene glycol infiltrated carboxymethylcellulose sodium-derived carbon aerogel

Ultralight and flexible carbon-based phase change composites with high porosity for enhanced shape memory and photothermal conversion performance

Polypyrrole coated carbon nanotube aerogel composite phase change materials with enhanced thermal conductivity, high solar-/electro- thermal energy conversion and storage

Polyethylene glycol (PEG)/silicon dioxide grafted aminopropyl group and carboxylic multi-walled carbon nanotubes (SAM) composite as phase change material for light-to-heat energy conversion and storage

Cellulose nanofibrous/MXene aerogel encapsulated phase change composites with excellent thermal energy conversion and storage capacity

Occipital and posterior electroencephalographic rhythms.

Grid structure phase change composites with effective solar/electro-thermal conversion for multi-functional thermal application

High thermal conductivity and low leakage phase change materials filled with three-dimensional carbon fiber network

Study on three-dimensional porous carbon fiber-MWCNTs-PEG phase change materials and its photo/electricity-thermal conversion performance

Ultralight and Flexible Carbon Foam-Based Phase Change Composites with High Latent-Heat Capacity and Photothermal Conversion Capability

Melamine Foam/CNT/Graphene Hybrid Aerogel-Based Phase Change Composites with High Latent Heat Capacity for Solar/Electrothermal Conversion

Polypyrrole-coated conjugated microporous polymers/expanded graphene carbon aerogels based phase change materials composites for efficient energy conversion and storage

Preparation and Thermal Properties of Propyl Palmitate-Based Phase Change Composites with Enhanced Thermal Conductivity for Thermal Energy Storage

Form-Stable phase change composites based on porous carbon derived from polyacrylonitrile hydrogel

Thermal performance of modified melamine foam/graphene/paraffin wax composite phase change materials for solar-thermal energy conversion and storage