Abstract:Additive metal to zero-valent iron (ZVI) could enhance the reduction ability and the additive Cu 0 was incorporated to ZVI to accelerate PMS activation with atrazine (ATZ) as target compound. The efficiencies of ATZ degradation and PMS decomposition climbed up firstly and then declined as Cu 0 loading increased from 0.01 to 1.00 wt% with the maximums at 0.10 wt%. SO 4 •− , HO • , Fe(IV), O 2 •− and 1 O 2 were generated by nZVI-Cu 0 /PMS based on the results of electron paramagnetic resonance (EPR) and simultaneous degradation of nitrobenzene, ATZ, and methyl phenyl sulfoxide (PMSO). The rate constant of Fe(IV) and ATZ was estimated as 7 × 10 4 M −1 ∙s −1 via the variation of methyl phenyl sulfone (PMSO 2 )formation at different ATZ concentrations. However, Fe(IV) contributed negligibly to ATZ degradation due to the strong scavenging of Fe(IV) by PMS. SO 4 •− and HO • were the reactive species responsible for ATZ degradation and the yield ratio of SO 4 •− and HO • was about 8.70 at initial stage. Preliminary thermodynamic calculation on the possible activation ways revealed that the dominant production of SO 4 •− might originate from the atomic H reduction of PMS in the surface layer of nZVI-Cu 0 . Ten products of ATZ degradation were identified by HPLC/ESI/QTOF and the possible degradation pathways were analyzed combined with theoretical calculation on ATZ structure. The decrease of temperature or increase of solution pH led to the decline of ATZ degradation, as well as the individual addition of common ions (HCO 3 − , Cl − , SO 4 2− , NH 4 + , NO 3 − and F − ) and natural organic matters (NOM). In real water, ATZ was still efficiently degraded with the decontamination efficiency decreasing in the sequence of tap water > surface water > simulated wastewater > groundwater. For the treatment of ATZ-polluted continuous flow, nZVI-Cu 0 in double-layer layout had a higher capacity than the single-layer mode. Meanwhile, the leaching TFe and TCu were limited. The results indicate nZVI-Cu 0 /PMS is applicable and the multiple-layer layout of nZVI-Cu 0 is suggested for ATZ-polluted ground water and soil remediation.

Mechanochemically Synthesized S-ZVIbm Composites for the Activation of Persulfate in the Ph-Independent Degradation of Atrazine: Effects of Sulfur Dose and Ball-Milling Conditions

Insights into Atrazine Degradation by Persulfate Activation Using Composite of Nanoscale Zero-Valent Iron and Graphene: Performances and Mechanisms

Mechanochemically Synthesized Sulfidated Magnetite: A Novel Activator of Permonosulfate for Fe(IV) Dominated Degradation of Atrazine

Peroxydisulfate Activation by a Versatile Ball-Milled Nzvi@mos2 Composite: Performance and Potential Activation Mechanism

Enhanced persulfate activation by sulfur-modified Fe3O4 composites for atrazine degradation: Performance and mechanism

High-efficient peroxymonosulfate activation for rapid atrazine degradation by FeSx@MoS2 derived from MIL-88A(Fe)

Enhanced removal of organic pollutants by ball-milled FeS/ZVI activated persulfate process: Characterization, performance, and mechanisms

Fast degradation of atrazine by nZVI-Cu 0 /PMS: Re-evaluation and quantification of reactive species, generation pathways, and application feasibility

Fast Degradation of Atrazine by Nzvi-Cu0/pms: Re-evaluation and Quantification of Reactive Species, Generation Pathways, and Application Feasibility.

Efficient Peroxymonosulfate Activation by CuO-Fe2O3/MXene Composite for Atrazine Degradation: Performance, Coexisting Matter Influence and Mechanism

Effective peroxymonosulfate activation by natural molybdenite for enhanced atrazine degradation: Role of sulfur vacancy, degradation pathways and mechanism

Persulfate activation enhanced by sulfur‐doped cobaltous tetroxide for rapid and efficient degradation of atrazine

Ferrous oxalate covered ZVI through ball-milling for enhanced catalytic oxidation of organic contaminants with persulfate

Graphene-like carbon sheet-supported nZVI for efficient atrazine oxidation degradation by persulfate activation

High Efficient Activation of Peroxymonosulfate by Co9S8 Anchored in N, S, O Co-Doped Carbon Composite for Degradation of Sulfamethoxazole: Effect of Sulfur Precursor and Sulfur Doping Content

Enhanced removal of sulfadiazine by sulfidated ZVI activated persulfate process: Performance, mechanisms and degradation pathways

ZnS-embedded porous carbon for peroxydisulfate activation: Enhanced electron transfer for bisphenol A degradation

Degradation of Sulfamethazine by Persulfate Activated with Organo-Montmorillonite Supported Nano-Zero Valent Iron

Sulfidated zero valent iron as a persulfate activator for oxidizing organophosphorus pesticides (OPPs) in aqueous solution and aged contaminated soil columns

Activation of Persulfate and Hydrogen Peroxide by Using Sulfide-Modified Nanoscale Zero-Valent Iron for Oxidative Degradation of Sulfamethazine: A Comparative Study

MOFs-derived Mn/C Composites Activating Peroxymonosulfate for Efficient Degradation of Sulfamethazine: Kinetics, Pathways, and Mechanism