Abstract:The lander detection device uses the outrigger buffer structure due to its complex impact loading during the landing process. This external load can be absorbed by using a lander buffer mechanism consisting of porous Metal Rubber (MR) buffer and a backup buffering structure. Therefore, in order to fully use the dry friction damping characteristics of MR material behaved under special working conditions, a buffering system has been designed to examine the important factors involved in shock energy absorption. In this study, the hybrid buffering system with MR buffer as core component and an aluminum honeycomb as auxiliary structure for the consideration of safety and reliability was modeled. Moreover, the finite element method by combining the COMBI165 spring damping unit and solid contact elements were used in ANSYS LS-DYNA to simulate the shock resistance of buffer component. The effect of influencing factors on mechanical properties of MR, as well as the feature importance of nonlinear stiffness of MR buffer, were calculated with consideration of ambient temperature, peak value and pulse width of external excitation and relative density on the shock resistance of MR. According to the orthogonal comparison between the above three parameters and temperature, the impact resistance and temperature adaptability of MR were comprehensively analyzed. The final results demonstrated that MR material had major potential for absorbing the impact energy used as a buffer in landing equipment, which would provide constructive guidance for the design of hybrid buffering system and development of MR material in the future.

Energy Absorption Performance of Open-Cell Aluminum Foam and Its Application in Landing Buffer System

Study on Impact Energy Absorption and Adhesion of Biomimetic Buffer System for Space Robots

Design and selection of aluminum foam for impact damper of legged lunar Lander

Low Strain Rate Compressive Behavior of High Porosity Closed-Cell Aluminum Foams

Three-dimensional Voronoi-based simulation study of stepwise density-graded aluminum foams: Buffering and energy absorption performance analysis

Dynamic response and energy absorption of aluminum foam sandwich under low-velocity impact

Compressive behavior and energy absorption analysis of casting skin-wrapped aluminum foams

Research on Aluminum Honeycomb Buffer Device for Soft Landing on the Lunar Surface

Fabrication and Compressive Behavior of Open-Cell Aluminum Foams Via Infiltration Casting Using Spherical CaCl2 Space-Holders

A Double Degree Freedom Mass-Spring-Damper-Foam Collision Model for High Porosity Metallic Foams

Energy Absorption Behaviors of a Novel Buffer Lander-Leg with Yoshimura Core

Shock Resistance Properties of Porous Buffer Made of Metal Rubber for Landing Equipment

Experimental, numerical and analytical studies on the aluminum foam filled energy absorption connectors under impact loading

Study on Quasi-Static Compressive Properties of Aluminum Foam-Epoxy Resin Composite Structures

Preparation and characterization of light weight aluminum matrix syntactic foams with high energy absorbing capacity

Effects of Aluminum Foam Filling on the Low-Velocity Impact Response of Sandwich Panels with Corrugated Cores

Mechanical properties and energy absorption capabilities of aluminium foam sandwich structure subjected to low-velocity impact

Compressive Properties and Energy Absorption of Aluminum Foams with a Wide Range of Relative Densities

Dynamic Energy Absorption Property of Closed-Cell Aluminum Foam with Al Matrix and Al-6Si Matrix

Mechanical Properties Of Open-Cell Metal Foams Under Low-Velocity Impact Loading

Micro-CT in the mechanical properties and energy absorption of closed-cell aluminium foam