Microstructures and Mechanical Properties of Equiatomic NiTi Shape Memory Alloy Undergoing Local Canning Compression and Subsequent Annealing
Sun Dong,Jiang Shuyong,Xing Xiaodong,Yan Bingyao,Yu Junbo,Zhang Yanqiu
DOI: https://doi.org/10.1007/s12540-021-00966-z
IF: 3.451
2021-01-01
Metals and Materials International
Abstract:Local canning compression is imposed on equiatomic NiTi shape memory alloy (SMA) with complete B19′ martensite. A fraction of retained nanocrytalline grains are embedded in the dominant amorphous phase. The compressed NiTi samples are annealed for 2 h at various temperatures, including 300, 450 and 600 °C. Grain size increases with increasing crystallization temperature during heat treatment. Under annealing at 300 °C, nanocrystalline grains are dominant in NiTi SMA, where there exists local amorphous zone. Under annealing at 450 °C, almost complete nanocrystalline can be obtained. Under annealing at 600 °C, grain size increases substantially, but there still exists a small amount of nanocrystalline grains. Under annealing at 300 °C, NiTi SMA exhibits extremely high elastic limit, but its plasticity is poor. Under annealing at 450 °C, NiTi SMA exhibits very high yield stress and it simultaneously keeps high plasticity. Under annealing at 600 °C, NiTi SMA exhibits relatively low yield stress, but its yield stress is still higher than that of as-received NiTi SMA and its plasticity is also high.