Preparation of Photothermal Membrane for Vacuum Membrane Distillation with Excellent Anti-Fouling Ability Through Surface Spraying

Jun Liu,Hong Guo,Zhiye Sun,Baoan Li
DOI: https://doi.org/10.1016/j.memsci.2021.119434
IF: 9.5
2021-01-01
Journal of Membrane Science
Abstract:Membrane distillation (MD) is one of the potential technologies that may meet the freshwater demands by using solar energy. In this study, based on the commercial flat sheet PVDF membrane, a kind of superhydrophobic photothermal MD membrane was prepared by surface spraying with the TiC and TiO2 nanoparticle mixed solution. The surface characteristics and the desalination performances in vacuum membrane distillation (VMD) were carried out, and the influences of the photothermal layers on the heat and mass transfer process were investigated through the numeric simulation models. The results showed that the modified membrane possessed a superhydrophobic surface, with a water contact angle of 162.5 degrees +/- 2.1 degrees and a sliding angle of 5.7 degrees +/- 1.2 degrees. Compared to the solar-free process, a flux increment of 0.64 kg m(-2) h(-1) was obtained in VMD applications when the solar intensity was 1000 W m(-2) at room temperature. While improving the feed temperature to 80 degrees C and solar irradiation to 1500 W m(-2), the permeate flux reached 31.41 kg m(-2) h(-1), which was 5.66 kg m(-2) h(-1) higher than the solar-free process. The simulation results indicated that the surface temperature of the solar-aid MD process was much higher than the solar-free process, which provided the additional energy for water evaporation. Further, the anti-fouling tests showed that the modified membrane nearly had no flux decline and kept high salt rejection (above 99.95%) in a 156 h operation with 70 g L-1 (NaCl + CaCl2) feed solution, which showed the potential in both MD process and the solar-driven desalination process.
What problem does this paper attempt to address?