Abstract:CsPbIBr 2 perovskite has been considered as a promising candidate for the light-harvesting material of perovskite solar cells (PSCs) due to its acceptable band gap and high stability. Nevertheless, the efficiency of CsPbIBr 2 -based PSC still lags behind that of its homologs and is far away from the theoretical value. This can be attributed to the poor quality of CsPbIBr 2 perovskite film. Therefore, it is highly desirable to improve the quality of CsPbIBr 2 perovskite film for enhancing the photovoltaic performance of CsPbIBr 2 PSCs. In this work, cellulose acetate (CA) is used as a polymer additive that is introduced into CsPbIBr 2 precursor solution for improving the quality of CsPbIBr 2 perovskite film via controlling crystallization process. The interaction between the C=O group of CA and Pb 2+ in the precursor solution and the enhanced viscosity of precursor solution induced by CA addition reduce the crystallization rate of CsPbIBr 2 perovskite. As a result, a compact CsPbIBr 2 perovskite film with high crystallinity, large grain size, and low density of defect is prepared. The remarkably improved quality of CsPbIBr 2 perovskite film upon CA addition can be attributed to the relatively slow crystallization rate. The slow crystallization rate allows the perovskite film to have enough time to form perfect perovskite crystal structure with large-size crystal grain and low density of defects. Furthermore, the oxygen functional groups of CA can passivate the undercoordinated Pb 2+ , which effectively suppresses the defects and traps induced by Pb 2+ in CsPbIBr 2 perovskite film. The stability of CsPbIBr 2 perovskite film is also greatly improved by CA addition. The added CA does not participate into the CsPbIBr 2 perovskite crystal but distributes at the grain boundaries and, or, interfaces area and forms a moisture barrier around perovskite grains, which obviously enhances the stability of CsPbIBr 2 perovskite film in the ambient air. The carbon-based CsPbIBr 2 perovskite solar cells with a configuration of FTO/TiO 2 /perovskite film/ carbon are fabricated by using the carbon layer as both the hole-transport layer and the back electrode. Under the illumination of 100 mW/cm 2 , the PSC based on CA-CsPbIBr 2 perovskite film delivers a high conversion efficiency of 7.52%, which is increased by 40% compared with the efficiency of the device based on the pure CsPbIBr 2 perovskite film. In addition, the PSC based on CA-CsPbIBr 2 perovskite film shows a hysteresis index (HI) of 7%, while the device based on pure CsPbIBr 2 film displays a higher HI of 22%. This result demonstrates that the CA addition can effectively suppress the hysteresis effect of inorganic PSCs. The stability of the PSC based on CA-CsPbIBr 2 perovskite film is investigated by tracking the variation of the efficiency with time in the ambient condition. The fabricated PSCs without any encapsulation are stored in the air. The photovoltaic performance is measured once a day. The efficiency of the PSC based on CA-CsPbIBr 2 perovskite remains more than 90% of its initial value after being stored in the air for 800 h, showing an excellent long-term stability. Therefore, this work provides a facile and effective method of improving the quality of CsPbIBr 2 perovskite films, which is expected to be helpful in developing high-efficiency and stable carbon-based inorganic PSCs.

Remarkable Quality Improvement of CsPbIBr2 Perovskite Film by Cellulose Acetate Addition for Efficient and Stable Carbon-Based Inorganic Perovskite Solar Cells

Enhancing Quality of CsPbIBr2 Inorganic Perovskite Via Cellulose Acetate Addition for High-Performance Perovskite Solar Cells

Optimizing the Substrate Pre-Heating and Post-Annealing Temperatures for Fabricating High-Performance Carbon-Based CsPbIBr2 Inorganic Perovskite Solar Cells

Bifunctional Passivation for Efficient and Stable Low-Temperature Processed All-Inorganic CsPbIBr2 Perovskite Solar Cells

Efficient and Stable Carbon‐Based CsPbIBr 2 Perovskite Solar Cells by 4‐Aminomethyltetrahydropyran Acetate Modification

High-quality CsPbBr3 films prepared by introducing methylammonium iodide into PbBr2 precursor for efficient perovskite solar cells

Photovoltaic Performance Improvement of All‐Inorganic CsPbBr3 Perovskite Solar Cells by Antisolvent Assisted Crystallization

Tailoring of CsPbIBr2 Perovskite Crystallization Via Phenylthiourea for Stable and Efficiency Perovskite Solar Cells

Ultrahigh Fill-Factor All-Inorganic CsPbBr3 Perovskite Solar Cells Processed from Two-Step Solution Method and Solvent Additive Strategy

Ionic Liquid Surface Treatment-Induced Crystal Growth of CsPbIBr2 Perovskite for High-Performance Solar Cells

High-Efficiency (>14%) and Air-Stable Carbon-Based, All-Inorganic CsPbI2Br Perovskite Solar Cells Through a Top-Seeded Growth Strategy

Bifunctional Lewis Base‐Assisted Fabrication of High‐Quality CsPbIBr2 Perovskite for Efficient and Stable Solar Cells

Crystallization Management of CsPbI2Br Perovskites by PbAc2-incorporated Twice Spin-Coating Process for Efficient and Stable CsPbI2Br Perovskite Solar Cells

Vapor-assisted deposition of CsPbIBr2 films for highly efficient and stable carbon-based planar perovskite solar cells with superior Voc

Bifunctional Green Cellulose Derivatives Employed for High Efficiency and Stable Perovskite Solar Cells under Ambient Environment

Highly Crystalline CsPbI2Br Films for Efficient Perovskite Solar Cells Via Compositional Engineering

Adjustable Skeleton of Bilateral Lewis Base Passivator for CsPbI 3 Perovskite Solar Cells with PCE over 20% and Superior Stability

All-Inorganic Perovskite Solar Cells with Tetrabutylammonium Acetate as the Buffer Layer between the SnO 2 Electron Transport Film and CsPbI 3

In Situ Dehydration Condensation of Self‐Assembled Molecules Enables Stabilization of CsPbI3 Perovskites for Efficient Photovoltaics

High-quality All-Inorganic CsPbI2Br Thin Films Derived from Phase-Pure Intermediate for Efficient Wide-Bandgap Perovskite Solar Cells

Intermolecular Exchange Boosts Efficiency of Air‐Stable, Carbon‐Based All‐Inorganic Planar CsPbIBr2 Perovskite Solar Cells to Over 9%