Abstract:This paper investigates experimentally the flame height and temperature profile of window ejected thermal plume from compartment fire without facade wall. The previous works and correlations on these characteristics of such thermal plume mainly concern the condition with a facade wall, where the air entrainment of the thermal plume from the side of the facade wall is restricted. However, such entrainment constraint effect does not exist when the fire occurs at the top floor of the building noting that there is no facade above the top floor, for which scenario the flame height and temperature profile of the thermal plume characteristics have not been quantified in the literature. In this work, comprehensive experiments were carried out by employing a reduced scale model (1:8), consisting of a 0.4 m cubic fire compartment with six different window openings corresponding to various ventilation factors (A root H). A propane square porous burner was set as fire source with various fuel mass flow meters and hence heat release rate. All the tests were designed as uN-ventilated condition that stable flame was observed outside the window. The flame height outside the window was recorded through a CCD camera from the side view. The temperature profiles of the ejected fire plume outside the window were measured by the thermocouple arrays (7 rows, 7 columns) located above the top of the compartment. These measured quantities without the facade wall were compared from those with a facade wall. Results showed that the flame height can be still well correlated non-dimensionally by the excess fuel heat release rate and the characteristic length scale (l(1) = A root H-2/5) of the window. However, the flame height with a facade wall was higher, being 1.31 times of those without a facade wall. This difference was physically quantified by the air entrainment change due to constraint effect from the facade wall. The radial temperature profile in the ejected thermal fire plume at various height can be globally represented by the Gaussian function (T-z.x-T-infinity/T-z.max-T-infinity = e([-beta(x-xm/FWHM)2])) with and without facade wall, where the value of beta was found to be 2 In 2. These quantifications and correlations on window-ejected thermal plume characteristics without a facade wall, providing a significant supplementary over previous works focusing on condition with the facade wall, will be an important addition for the estimation of such thermal plume characteristics and its thermal impacts. This work, providing experimental data and correlations on window ejected thermal plume characteristics from compartment fire at the top level of the building without the effect of facade wall, will be an important supplementary over previous knowledge focusing on the scenario with the effect of facade wall.

Investigation on Vertical Temperature Profile of Thermal Ejected Plume from a Compartment Fire with an Adjacent Side Wall

Vertical Temperature Profile of Fire-Induced Facade Thermal Plume Ejected from a Fire Compartment Window with Two Adjacent Side Walls

Experimental Study on Vertical Temperature of Facade Fire Plume Ejected from Compartment Constrained by Adjacent Single Sidewall

Flame Height and Temperature Profile of Window Ejected Thermal Plume from Compartment Fire Without Facade Wall

Transverse and Lateral Temperature Profiles of the Window-Ejected Thermal Plume along the Facade

Heat Flux Profile Upon Building Facade with Side Walls Due to Window Ejected Fire Plume: an Experimental Investigation and Global Correlation

Experimental Study on the Heat Flux Profile Upon the Building Facade of the Window-Ejected Fire Plume

Experimental Investigation on Lateral Temperature Profile of Window-Ejected Facade Fire Plume with Ambient Wind

An Experimental Study on Vertical Temperature Profile of Facade Fire Plume Ejected from Compartment with an Opening Subjected to External Wind Normal to Facade

Experimental Study of Ejected Fire Plume from an Opening under Facing Wind Passing Through the Roof

Experimental Investigation on Window Ejected Facade Flame Heights with Different Constraint Side Wall Lengths and Global Correlation

Experimental and Theoretical Study on the Characteristics of the Spill Plume in a Compartment Fire with High-Low Opposing Openings

Numerical investigation of air curtain jet effect upon the compartment-facade fire safety protection based on temperature evolution and thermal impact

Experimental Study on Flame Height and Temperature Profile of Buoyant Window Spill Plume from an Under-Ventilated Compartment Fire

Facade Flame Height Ejected from Opening of a Compartment under the Coupling Effect of Side Walls and Ambient Wind

Evolutions of Gas Temperature Inside Fire Compartment and External Facade Flame Height with a Casement Window

Experimental study on temperature profile in long-narrow compartment fire with multiple lateral openings

Temperature Evolution and Flame Behavior Inside a Ceiling-Vented Compartment with Different Fire Source Locations under the Effect of Wind

A mathematical model on lateral temperature profile of buoyant window spill plume from a compartment fire

Effects of Side Walls on Facade Flame Entrainment and Flame Height from Opening in Compartment Fires

A reduced-scale experimental investigation of facade flame behavior ejected from a top-hung window of fire compartment