Multiplexed Quasi-static Strain Sensor with High Sensing Rate and Nano-strain Resolution

Jiageng Chen,Qingwen Liu,Xinyu Fan,Zuyuan He

DOI: https://doi.org/10.1364/acpc.2015.as4i.3

2015-01-01

Abstract:This paper presents a multiplexed π-phase shifted FBG based quasi-static strain sensing system. A result of 3 channel sensing with strain resolution better than 0.8 nε/Hz1/2 from 0.1 Hz to 50 Hz and sensing rate of 100 times per second is achieved.

What problem does this paper attempt to address?

Sub-Nano-Strain Multiplexed Fiber Optic Sensor Array for Quasi-Static Strain Measurement

Jiageng Chen,Qingwen Liu,Xinyu Fan,Zuyuan He

DOI: https://doi.org/10.1109/lpt.2016.2592506

IF: 2.6

2016-01-01

IEEE Photonics Technology Letters

Abstract:This letter presents a high resolution multiplexed strain sensor for quasi-static strain measurement based on π-phase-shifted fiber Bragg gratings (π-PSFBGs). The sensor array is composed by four π-PSFBGs in parallel with different delay lines, and a time-division multiplexing scheme is proposed to interrogate the π-PSFBGs in turn. The Pound-Drever-Hall technique and the sideband interrogation method are employed to improve the resolution and the sampling rate. In the demonstrational experiment, three-channel quasi-static strain sensing is realized with a resolution better than 0.4 n and a sampling rate of 100 samples/s.
Multiplexed Sub-Nano Resolution Quasi-Static Strain Sensor Based on Transient Response of Fabry-Perot Interferometers

Jiageng Chen,Qingwen Liu,Zuyuan He

DOI: https://doi.org/10.1117/12.2267101

2017-01-01

Abstract:We present a multiplexed quasi-static strain sensor with sub-nano resolution using fiber Fabry-Perot interferometers (FFPIs). The FFPIs are connected in ladder structure with cascaded couplers and delay fibers for multiplexing, and their transient response excited by laser pulses are acquired to distinguish the resonant frequencies of each FFPI. An electro-optical system based on acousto-optic modulator is employed to interrogate the sensor array. In the demonstrational experiment, 3-channel strain measurement with resolutions better than 0.2 n epsilon/Hz(1/2) in frequency band from 0.1 Hz to 100 Hz is realized.
0.1-Nano-strain Resolution Fiber Optic Sensor for Quasi-Static Strain Measurement with 1 Ks/s Sampling Rate

Jiageng Chen,Qingwen Liu,Xinyu Fan,Lin Ma,Jiangbing Du,Tomochik Tokunaga,Zuyuan He

DOI: https://doi.org/10.1117/12.2194700

2015-01-01

Abstract:We present a newly developed high performance fiber optics sensor for quasi-static strain measurement. The sensor consists of a piece of π-phase shifted FBG for static strain sensing, and fiber Fabry-Perot interferometer for reference, interrogated by an improved sideband interrogation method with real-time feedback loops. Strain resolution of 0.12 nano-strain was achieved with sampling rate up to 1 kS/s in laboratory experiments. Compared with previous sensor systems, the proposed method shows great improvement in the sensing rate as well as the resolution.
Wavelength Multiplexed Sub-Nano-Strain Resolution Optical Fiber Strain Sensor Array

Feisheng Wu,Jiageng Chen,Qingwen Liu,Shuangxiang Zhao,Bingxin Xu,Zuyuan He

DOI: https://doi.org/10.1364/ofs.2020.t3.64

2021-01-01

Abstract:We present a wavelength multiplexed demodulation scheme for high resolution FBG Fabry-Perot interferometer strain sensors. Four sensors with resolution better than 1 nε under sampling rate of 160 samples/s sharing one demodulation system is demonstrated.
Highly Sensitive and Fast Response Strain Sensor Based on Evanescently Coupled Micro/nanofibers

Wen Yu,Ni Yao,Jing Pan,Wei Fang,Xiong Li,Limin Tong,Lei Zhang

DOI: https://doi.org/10.29026/oea.2022.210101

IF: 8.9329

2022-01-01

Opto-Electronic Advances

Abstract:Flexible strain sensors play an important role in electronic skins, wearable medical devices, and advanced robots. Herein, a highly sensitive and fast response optical strain sensor with two evanescently coupled optical micro/nanofibers (MNFs) embedded in a polydimethylsiloxane (PDMS) film is proposed. The strain sensor exhibits a gauge factor as high as 64.5 for strain ≤ 0.5% and a strain resolution of 0.0012% which corresponds to elongation of 120 nm on a 1 cm long device. As a proof-of-concept, highly sensitive fingertip pulse measurement is realized. The properties of fast temporal frequency response up to 30 kHz and a pressure sensitivity of 102 kPa −1 enable the sensor for sound detection. Such versatile sensor could be of great use in physiological signal monitoring, voice recognition and micro-displacement detection.
Multiplexed Static FBG Strain Sensors by Dual-Comb Spectroscopy with a Free Running Fiber Laser

Jingjing Guo,Yihang Ding,Xiaosheng Xiao,Lingjie Kong,Changxi Yang

DOI: https://doi.org/10.1364/cleo_at.2018.jtu2a.89

2018-01-01

Abstract:We demonstrate a novel FBG sensor system by dual-comb spectroscopy with a single fiber laser cavity, which enables interrogation of multiplexed FBG strain sensors with 0.5 με resolution in a large dynamic range of 520 με.
Real-Time Interrogation of Multiplexed FBG Strain Sensors Based on a Thermally Tunable Microring Resonator Array

Fan Yang,Wenjia Zhang,Shuangxiang Zhao,Qingwen Liu,Jifang Tao,Zuyuan He

DOI: https://doi.org/10.1364/oe.27.006037

2019-01-01

Abstract:A high-resolution integrated multi-wavelength FBG interrogator is proposed based on a microring resonator array. Two-channel strain sensing is demonstrated with the dynamic stain resolution of 30 nε/√Hz over 100 Hz to 1 kHz.
Field Demonstration of 10-Nano Static Strain Resolution Multiplexed FBG Sensor for Geophysical Applications

Qingwen Liu,Tomochika Tokunaga,Katsuro Mogi,Hiroya Matsui,Herbert F. Wang,Teruyuki Kato,Zuyuan He

DOI: https://doi.org/10.1117/12.915958

2012-01-01

Abstract:We have developed an FBG sensor with a strain resolution better than 10 nano-strain (10(-8)) for geophysics applications. The sensor consists of a pair of identical FBGs, one for strain sensing and the other for reference. A narrow linewidth tunable laser is used to interrogate the two FBGs simultaneously. Cross-correlation algorithm is utilized to extract the Bragg wavelength difference between the FBGs with high precision. Multiplexed sensing is achieved using WDM technique. With this sensor, the crustal deformation induced by oceanic tide at Aburatsubo Bay in Japan is clearly observed with a strain resolution better than 10 ne. This is the first that 10 ne order static strain resolution is demonstrated with FBG sensors, providing a potential tool for the geophysics applications.
Sensing the Earth with Micro-Optics

Zuyuan He,Qingwen Liu,Jiageng Chen,Tomochika Tokunaga

DOI: https://doi.org/10.23919/moc.2017.8244524

2017-01-01

Abstract:We present a multiplexed quasi-static strain sensor system with sub-nano resolution based on the transient response of fiber Fabry-Perot interferometers. A 3-channel strain measurement with resolution better than 0.2 nϵ/√Hz in frequency band from 0.1 Hz to 100 Hz is realized in the demonstrational experiments.
Time-domain Multiplexed High Resolution Fiber Optics Strain Sensor System Based on Temporal Response of Fiber Fabry-Perot Interferometers

Jiageng Chen,Qingwen Liu,Zuyuan He

DOI: https://doi.org/10.1364/oe.25.021914

IF: 3.8

2017-01-01

Optics Express

Abstract:We developed a multiplexed strain sensor system with high resolution using fiber Fabry-Perot interferometers (FFPI) as sensing elements. The temporal responses of the FFPIs excited by rectangular laser pulses are used to obtain the strain applied on each FFPI. The FFPIs are connected by cascaded couplers and delay fiber rolls for the time-domain multiplexing. A compact optoelectronic system performing closed-loop cyclic interrogation is employed to improve the sensing resolution and the frequency response. In the demonstration experiment, 3-channel strain sensing with resolutions better than 0.1 nε and frequency response higher than 100 Hz is realized.
Simultaneous Strain, Temperature and Vibration Measurement Using A Multiplexed Fbg/Ffpi Sensor System

YJ Rao,PJ Henderson,DA Jackson,L Zhang,I Bennion

DOI: https://doi.org/10.1117/12.316989

1998-01-01

Abstract:A novel technique for simultaneous measurement of static-strain, temperature and vibration for structural health monitoring is demonstrated using a wavelength-multiplexed in-fibre-Bragg-grating (FBG)/fibre-Fabry-Perot-interferometer (FFPI) sensor system, which combines the advantages of both FBGs and fibre-optic low-coherence interferometry. An experimental system, including two Im long FFPIs with central wavelengths of 1531nm and 1534nm and a FBG with a central wavelength of 1555nm, is demonstrated. A static strain resolution of better than 1 mu epsilon, over a range of 5m epsilon, a temperature sensitivity of 0.1 degrees C and a vibration amplitude sensitivity of better than 1nm/root Hz have been obtained. The system cross-talk measured is less than -50dB.
Dynamic strain measurement using two wavelength-matched fiber Bragg grating sensors interrogated by a cascaded long-period fiber grating

Hongbo Zou,Dakai Liang,Jie Zeng

DOI: https://doi.org/10.1016/j.optlaseng.2011.09.005

IF: 5.666

2012-02-01

Optics and Lasers in Engineering

Abstract:In this work, we describe a fiber Bragg grating (FBG) sensing system using two wavelength-matched FBG sensors for static and dynamic strain measurement. A cascaded long-period fiber grating (CLPG)-based demodulation technique has been used to interrogate the two wavelength-matched FBG sensors. Experimental results of static strain measurement show that the proposed system has a strain resolution of 1με. This system has also been used for dynamic strain measurement. An eddy current displacement meter-based system has been used as a comparison measurement. Experimental results of dynamic strain measurement have proved that the FBG sensing system has a good performance in the measurement of dynamic strain. The results of static and dynamic strain measurement indicate that the sensing system using two wavelength-matched FBG sensors is superior to the single FBG sensor system.

optics
Sub-nano resolution fiber-optic static strain sensor using a sideband interrogation technique.

Qingwen Liu,Tomochika Tokunaga,Zuyuan He

DOI: https://doi.org/10.1364/OL.37.000434

IF: 3.6

2012-01-01

Optics Letters

Abstract:We propose a novel sideband interrogation technique with multiplex radio frequency intensity and phase modulation to measure the resonance frequency difference between two optical resonators. Based on this new technique, an ultrahighly sensitive fiber-optic static strain sensor system consisting of a pair of identical fiber Fabry-Perot interferometers is built by incorporating a cross-correlation data processing algorithm. A static strain resolution down to 0.8 ne is demonstrated experimentally, which makes the sensor system a useful tool for geophysical research applications. (C) 2012 Optical Society of America
Static Pure Strain Sensing Using Dual-Comb Spectroscopy with FBG Sensors.

Ruixue Zhang,Zebin Zhu,Guanhao Wu

DOI: https://doi.org/10.1364/oe.27.034269

IF: 3.8

2019-01-01

Optics Express

Abstract:We propose a method to precisely characterize the optical response of a fiber Bragg grating (FBG) sensor for static strain sensing by using dual-comb spectroscopy (DCS). By digitally post-correcting the mutual noise between the two combs, a robust and pure strain sensing system is achieved by compensating for the temperature-induced frequency shift of the FBG sensor. The comb-resolved radio-frequency (RF) spectra generated by DCS are obtained. Meanwhile, the stability of the central Bragg frequency of the FBG-reflected spectrum in the RF domain is 0.315 kHz, which is better than the difference of repetition rate (1 kHz). A reference FBG is used for detecting and compensating for the temperature-induced central frequency drift. Finally, a spectral sensitivity of 0.85 pm/µɛ with 0.8 µɛ static strain resolution is achieved.
Simultaneous Measurement of Strain and Temperature Using Pi-Phase-Shifted Fiber Bragg Grating on Polarization Maintaining Fiber

Jiageng Chen,Qingwen Liu,Xinyu Fan,Zuyuan He

2016-01-01

Abstract:A high resolution strain and temperature discriminative sensor has been developed, using a pi-phase shifted FBG on polarization maintainingfiber. Resolutions of 0.104 mu epsilon and 0. 005 degrees C in strain and temperature are achieved.
An Ultra-High-Resolution Fbg Static-Strain Sensor for Geophysics Applications

Qingwen Liu,Zuyuan He,Tomochika Tokunaga,Kazuo Hotate

DOI: https://doi.org/10.1117/12.866402

2010-01-01

Abstract:We report an ultra-high-resolution static-strain measurement with a pair of fiber Bragg gratings (FBGs), one for strain sensing and the other for compensating the error due to temperature disturbance and source drift. The difference between the two FBGs' Bragg wavelengths is evaluated by utilizing a cross-correlation algorithm. The mechanism of noise suppression by the cross-correlation algorithm is quantitatively analyzed and the factor that determines the ability of noise suppression of this algorithm is revealed. The temperature dependence is further subtracted by using a vector operation. When no strain is applied, an ultra-high wavelength resolution corresponding to 2.6 n epsilon was obtained, which gives the ultimate performance of the measurement system. With a variable strain applied with a piezo-stage, a resolution of 17.6 n epsilon was demonstrated. This is the first demonstration, to the best of our knowledge, that a real-static strain down to 10 n epsilon is measured, providing a powerful technique for the measurement in geophysics application.
High-speed Quasi-Distributed Strain Sensing Based on Time Division Multiplexing of Fibre Bragg Gratings

L. Ma,C. Ma,Y. Wang,D. Y. Wang,A. Wang

DOI: https://doi.org/10.1049/el.2015.4398

2016-01-01

Electronics Letters

Abstract:A high-speed quasi-distributed fibre optic sensing technique for strain is proposed and a proof-of-concept experiment is performed. The sensing link is formed by multiple fibre Bragg gratings and interrogated by a pulsed broadband source. A dispersive unit is used to translate wavelength variations to time-delay changes to enable high-speed sensing capability. As the gratings can be weakly reflecting and nominally identical in their reflection spectra, this technique has the inherent capability of high-capacity multiplexing. Linear and repeatable static strain response was achieved with a strain-delay conversion factor of -3.37 ps/epsilon and a resolution of 4.73 epsilon. Dynamic strain was successfully measured at a sampling rate of 7 kHz and dynamic resolution of 0.2 epsilon/Hz was obtained.
Multi-point in-fibre grating strain sensing system with a combined spatial and time division multiplexing scheme

y j rao,a b lobo ribeiro,d a jackson,lin zhang,ian bennion

DOI: https://doi.org/10.1049/ic:19951216

1995-01-01

Abstract:We have demonstrated a combined spatial- and time division multiplexing topology with drift-compensated high-resolution wavelength-shift detection for a fibre Bragg grating (FBG) sensor system. An eight-element grating sensor array based on this topology is demonstrated although the network can support 16 FBG sensors without affecting the signal-to-noise ratio of each sensor. A range-to-resolution ratio of 1250:1 for quasi-static strain measurement has been achieved with a measurement bandwidth of 30 Hz
Pico-strain Resolution Fiber-Optic Sensor with White-Light Interferometry

Shuting Liu,Qingwen Liu,Shuangxiang Zhao,Zuyuan He

DOI: https://doi.org/10.1364/ol.456466

IF: 3.6

2022-01-01

Optics Letters

Abstract:The fiber Bragg grating (FBG) sensor is well known for simple fabrication, absolute measurement, inherent multiplexing capability, etc. To date, most FBG sensors that use a broadband light source for demodulation can only achieve resolution at the mu epsilon level. In this Letter, we propose a white-light-driven self-reference sensing system with FBGs, using a Mach-Zehnder interferometer (MZI) and a white light source, to realize multiplexed high-resolution vibration sensing with a very simple system configuration. A strain resolution of 35p epsilon/root HZ at 1 kHz is demonstrated, which is several orders of magnitude better than the current FBG sensor systems with white light sources. The performance of the sensing system is analyzed, and multiplexing capability is also experimentally evaluated; there is no observable cross talk. (C) 2022 Optica Publishing Group
Simultaneous Strain, Temperature and Vibration Measurement Using a Multiplexed In-Fibre-bragg-grating/fibre-fabry-perot Sensor System

YJ Rao,PJ Henderson,DA Jackson,L Zhang,I Bennion

DOI: https://doi.org/10.1049/el:19971409

1997-01-01

Electronics Letters

Abstract:A novel technique for simultaneous measurement of static-strain, temperature and vibration for structural health monitoring is demonstrated using a wavelength-multiplexed in-fibre-Bragg-grating (FBG)/fibre-Fabry-Perot-interferometer (FFPI) sensor system, which combines the advantages of both FBGs and fibre optic low-coherence interferometry.

Multiplexed Quasi-static Strain Sensor with High Sensing Rate and Nano-strain Resolution

Sub-Nano-Strain Multiplexed Fiber Optic Sensor Array for Quasi-Static Strain Measurement

Multiplexed Sub-Nano Resolution Quasi-Static Strain Sensor Based on Transient Response of Fabry-Perot Interferometers

0.1-Nano-strain Resolution Fiber Optic Sensor for Quasi-Static Strain Measurement with 1 Ks/s Sampling Rate

Wavelength Multiplexed Sub-Nano-Strain Resolution Optical Fiber Strain Sensor Array

Highly Sensitive and Fast Response Strain Sensor Based on Evanescently Coupled Micro/nanofibers

Multiplexed Static FBG Strain Sensors by Dual-Comb Spectroscopy with a Free Running Fiber Laser

Real-Time Interrogation of Multiplexed FBG Strain Sensors Based on a Thermally Tunable Microring Resonator Array

Field Demonstration of 10-Nano Static Strain Resolution Multiplexed FBG Sensor for Geophysical Applications

Sensing the Earth with Micro-Optics

Time-domain Multiplexed High Resolution Fiber Optics Strain Sensor System Based on Temporal Response of Fiber Fabry-Perot Interferometers

Simultaneous Strain, Temperature and Vibration Measurement Using A Multiplexed Fbg/Ffpi Sensor System

Dynamic strain measurement using two wavelength-matched fiber Bragg grating sensors interrogated by a cascaded long-period fiber grating

Sub-nano resolution fiber-optic static strain sensor using a sideband interrogation technique.

Static Pure Strain Sensing Using Dual-Comb Spectroscopy with FBG Sensors.

Simultaneous Measurement of Strain and Temperature Using Pi-Phase-Shifted Fiber Bragg Grating on Polarization Maintaining Fiber

An Ultra-High-Resolution Fbg Static-Strain Sensor for Geophysics Applications

High-speed Quasi-Distributed Strain Sensing Based on Time Division Multiplexing of Fibre Bragg Gratings

Multi-point in-fibre grating strain sensing system with a combined spatial and time division multiplexing scheme

Pico-strain Resolution Fiber-Optic Sensor with White-Light Interferometry

Simultaneous Strain, Temperature and Vibration Measurement Using a Multiplexed In-Fibre-bragg-grating/fibre-fabry-perot Sensor System