Abstract:The deformation-induced surface roughening of an Al-Mg alloy is analyzed using a combination of experiments and modeling. A mesoscale oligocrystal of AA5052-O, obtained by recrystallization annealing and subsequent thickness reduction by machining, that contains approx. 40 grains is subjected to uniaxial tension. The specimen contains one layer of grains through the thickness. A laser confocal microscope is used to measure the surface topography of the deformed specimen. A finite element model with realistic (non-columnar) shapes of the grains based on a pair of Electron Back-Scatter Diffraction (EBSD) scans of a given specimen is constructed using a custom-developed shape interpolation procedure. A Crystal Plasticity Finite Element (CPFE) framework is then applied to the voxel model of the tension test of the oligocrystal. The unknown material parameters are determined inversely using an efficient, custom-built optimizer. Predictions of the deformed shape of the specimen, surface topography, evolution of the average roughness with straining and texture evolution are compared to experiments. The model reproduces the averaged features of the problem, while missing some local details. As an additional verification of the CPFE model, the statistics of surface roughening are analyzed by simulating uniaxial tension of an AA5052-O polycrystal and comparing it to experiments. The averaged predictions are found to be in good agreement with the experimentally observed trends. Finally, using the same polycrystalline specimen, texture–morphology relations are discovered, using a symbolic Monte Carlo approach. Simple relations between the Schmid factor and roughness can be inferred purely from the experiments. Novelties of this work include: realistic 3D shapes of the grains; efficient and accurate identification of material parameters instead of manual tuning; a fully analytical Jacobian for the crystal plasticity model with quadratic convergence; novel texture–morphology relations for polycrystal.

Modeling rough surfaces as a strategy to control the crystal quality, spatial and size distribution in semiconductor nanoparticles growth: A theoretical-experimental approach

Recent Efforts in Modelling Combined Rate, Size and Thermal Effects on Single Crystal Strength

Generation of Amorphous Silica Surfaces with Controlled Roughness

The Growth Model and Experimental Validation of Size-Controlled Nanocrystalline Silicon

Effect of surface diffusion algorithm on nanostructure formation in a semi-empirical Monte Carlo model of sputter erosion of materials

On the Microcrystal Structure of Sputtered Cu Films Deposited on Si(100) Surfaces: Experiment and Integrated Multiscale Simulation

Establishment of Nucleation and Growth Model of Silica Nanostructured Particles and Comparison with Experimental Data

Surface properties of epitaxially grown crystals

Effects of surface stability on the morphological transformation of metals and metal oxides as investigated by first-principles calculations

Unveiling the chemical and morphological features of Sb-SnO2 nanocrystals by the combined use of high-resolution transmission electron microscopy and ab initio surface energy calculations

Detailed Characterization of Rough Surfaces for Silica Materials

Molecular dynamics simulation of surface phenomena due to high electronic excitation ion irradiation in amorphous silica

Nucleation and Growth of Crystal on a Substrate Surface: Structure Matching at the Atomistic Level

Heterogeneous Nucleation on Concave Rough Surfaces: Thermodynamic Analysis and Implications for Nucleation Design

A Theoretical Study On The Growth Of Low-Dimensional Nanocrystals On Isotropic Substrates

Deformation-Induced Surface Roughening of an Aluminum–Magnesium Alloy: Experimental Characterization and Crystal Plasticity Modeling

Roughness of amorphous/crystalline interface in pre-amorphization implantation: Molecular dynamic simulation and modeling

Multiscale modeling of damaged surface topology in a hypersonic boundary

Complex-Temperature Properties of the Ising Model on 2D Heteropolygonal Lattices

Progress on the Modeling of Nucleation and Growth Based on Monodisperse Fluorid Nanocrystals

Dynamics of ultrathin metal films on amorphous substrates