Abstract:Tin dioxide (SnO2) has attracted extensive attention as an anode for lithium-ion batteries (LIBs) due to its high theoretical specific capacity, however, it suffers from the severe volume changes upon lithiation/delithiation cycling, thus leading to fast capacity fading. To overcome the drawbacks, we herein report a facile one-pot self-templating fabrication of Ti-doped SnO2 @carbon nanotubes (Ti-SnO2 @CNTs), via annealing the electrospun precursor nanofibers of tetrabutyl titanate (TBT), tetraethyl orthosilicate (TEOS), polyvinylidene difluoride (PVDF), polyvinylpyrrolidone (PVP), and stannous chloride (SnCl2). Interestingly, the introduction of TBT or not can lead to the controlled fabrication of the tubular or solid fibrous structure. During the annealing process, the chemical reaction between PVDF, TEOS, and TBT in-situ leads to the formation of tubular structure, while the SnCl2 converts into ultrafine SnO2 nanoparticles, embedding into the PVP-derived N-doped carbon nanotubes. When employed as anode materials for LIBs, the Ti-SnO2 @CNTs deliver high reversible capacities of 868.6/ 495.9 mAh g-1 at 0.2/1.0 A g-1 after 200/500 cycles, higher than those for the fibrous SnO2 @CNFs counterpart (654.9/391.08 mAh g-1). The better lithium storage performance is related to the unique carbon nanotube structure and the Ti-doping, which bring improved electrical conductivity, enhanced structural stability, and shortened ion diffusion path. More importantly, we demonstrate the facile electrospinning fabrication of tubular nanostructured hybrid electrodes for high-performance energy storage applications.

Boosting the Lithium Storage Performance of Tin Dioxide by Carbon Nanotubes Supporting and Surface Engineering.

Facile Preparation of One-Dimensional Hollow Tin Dioxide@carbon Nanocomposite for Lithium-Ion Battery Anode

Synergistic effect of tailored 3D/2D Ti3C2Tx/CoS2/C nanostructured composite anode for significantly enhanced Li-ion storage

SnO_2-filled carbon nanotubes and their lithium ions storage properties

Encapsulating Tin Dioxide@Porous Carbon in Carbon Tubes: A Fiber-In-Tube Hierarchical Nanostructure for Superior Capacity and Long-Life Lithium Storage

An Elaborate Strategy for Fabricating One-Dimensional Quasi-Hollow Nanostructure of Tin Dioxide@carbon Composite with Improved Lithium Storage Performance

The Influence of Porous Carbon Nanosheet/Carbon Nanotubes 3D Network on Tin Oxide Lithium Ion Batteries

Boosting the Lithium Storage of Tin Dioxide Nanotubes by Mxene Inks As Conductive Binder

Tin-based oxide microsphere reinforced by Al2O3 and CNT with superior lithium storage performance

A New Hybrid Strategy for Fabricating Titanium Dioxide/tin Dioxide/carbon Composites with Outstanding Lithium-Ion Storage

Reducing the Excessive Interior Space of SnO2@C Nanotubes by Encapsulating SnO2 Nanowires for High Lithium Storage

Facile Synthesis of Ultrasmall Tin Oxide Nanoparticles Embedded in Carbon As High-Performance Anode for Lithium-Ion Batteries

High Lithium Storage Performance of Coo with A Distinctive Dual-Carbon-Confined Nanoarchitecture

The Optimized Tin Dioxide-Carbon Nanocomposites As High-performance Anode for Lithium Ion Battery with a Long Cycle Life

"Electron-Sharing" Mechanism Promotes Co@Co 3 O 4 /CNTs Composite as the High-Capacity Anode Material of Lithium-Ion Battery.

Porous carbon assisted carbon nanotubes supporting Fe<sub>3</sub>O4 nanoparticles for improved lithium storage

"Electron-Sharing" Mechanism Promotes Co@Co3O4/CNTs Composite as the High-Capacity Anode Material of Lithium-Ion Battery.

Self-templating Fabrication of Ti-doped SnO2 @carbon Nanotubes Via Electrospinning for High-Performance Lithium-Ion Batteries

Carbon Coated Porous SnO2 Nanosheet Arrays on Carbon Cloth Towards Enhanced Lithium Storage Performance

Zn-doped Tin monoxide nanobelt induced engineering a graphene and CNT supported Zn-doped Tin dioxide composite for Lithium-ion storage

Accelerating O‐Redox Kinetics with Carbon Nanotubes for Stable Lithium‐Rich Cathodes