Wavelength multiplexed Fourier ptychograhic microscopy

Y Zhou,J Wu,Z Bian,G Zheng,Q Dai

DOI: https://doi.org/10.1364/cosi.2016.ct2d.4

2016-01-01

Abstract:The time-consuming acquisition process of Fourier Ptychographic Microscopy (FPM) greatly limits its application in biological imaging. We report a novel wavelength multiplexed FPM (WMFPM) strategy, compatible with most existing methods, to further speed up the acquisition process.

What problem does this paper attempt to address?

Effect of spatial spectrum overlap on fourier ptychographic microscopy

Qiulan Liu,Cuifang Kuang,Yue Fang,Peng Xiu,Yicheng Li,Ruixin Wen,Xu Liu

DOI: https://doi.org/10.1142/S1793545816410042

IF: 2.396

2017-01-01

Journal of Innovative Optical Health Sciences

Abstract:Fourier ptychographic microscopy (FPM) is a newly developed imaging technique which stands out by virtue of its high-resolution and wide FOV. It improves a microscope's imaging performance beyond the diffraction limit of the employed optical components by illuminating the sample with oblique waves of different incident angles, similar to the concept of synthetic aperture. We propose to use an objective lens with high-NA to generate oblique illuminating waves in FPM. We demonstrate utilizing an objective lens with higher NA to illuminate the sample leads to better resolution by simulations, in which a resolution of 0.28 mu m is achieved by using a high-NA illuminating objective lens (NA = 1.49) and a low-NA collecting objective lens (NA = 0.2) in coherent imaging (lambda = 488 nm). We then deeply study FPM's exact relevance of convergence speed to spatial spectrum overlap in frequency domain. The simulation results show that an overlap of about 60% is the optimal choice to acquire a high-quality recovery (520*520 pixels) with about 2 min ' s computing time. In addition, we testify the robustness of the algorithm of FPM to additive noises and its suitability for phase objects, which further proves FPM's potential application in biomedical imaging.
Fourier Ptychographic Microscopy Using Wavelength Multiplexing

You Zhou,Jiamin Wu,Zichao Bian,Jinli Suo,Guoan Zheng,Qionghai Dai

DOI: https://doi.org/10.1117/1.jbo.22.6.066006

IF: 3.758

2017-01-01

Journal of Biomedical Optics

Abstract:Fourier ptychographic microscopy (FPM) is a recently developed technique stitching low-resolution images in Fourier domain to realize wide-field high-resolution imaging. However, the time-consuming process of image acquisition greatly narrows its applications in dynamic imaging. We report a wavelength multiplexing strategy to speed up the acquisition process of FPM several folds. A proof-of-concept system is built to verify its feasibility. Distinguished from many current multiplexing methods in Fourier domain, we explore the potential of high-speed FPM in spectral domain. Compatible with most existing FPM methods, our strategy provides an approach to high-speed gigapixel microscopy. Several experimental results are also presented to validate the strategy.
Digital micromirror device-based laser-illumination Fourier ptychographic microscopy.

Cuifang Kuang,yousi ma,renping zhou,Justin Lee,George Barbastathis,Ramachandra R Dasari,Zahid Yaqoob,Peter T C So

DOI: https://doi.org/10.1364/OE.23.026999

IF: 3.8

2015-01-01

Optics Express

Abstract:We report a novel approach to Fourier ptychographic microscopy (FPM) by using a digital micromirror device (DMD) and a coherent laser source (532 nm) for generating spatially modulated sample illumination. Previously demonstrated FPM systems are all based on partially-coherent illumination, which offers limited throughput due to insufficient brightness. Our FPM employs a high power coherent laser source to enable shot-noise limited high-speed imaging. For the first time, a digital micromirror device (DMD), imaged onto the back focal plane of the illumination objective, is used to generate spatially modulated sample illumination field for ptychography. By coding the on/off states of the micromirrors, the illumination plane wave angle can be varied at speeds more than 4 kHz. A set of intensity images, resulting from different oblique illuminations, are used to numerically reconstruct one high-resolution image without obvious laser speckle. Experiments were conducted using a USAF resolution target and a fiber sample, demonstrating high-resolution imaging capability of our system. We envision that our approach, if combined with a coded-aperture compressive-sensing algorithm, will further improve the imaging speed in DMD-based FPM systems. (C) 2015 Optical Society of America
High-throughput Multiplexed Fluorescence Lifetime Microscopy.

Zhimin Zhang,Xin Liu,Minfei He,Yuran Huang,Liang Xu,Yubing Han,Dazhao Zhu,Xiang Hao,Cuifang Kuang,Xu Liu

DOI: https://doi.org/10.1364/ol.503136

2023-01-01

Abstract:Fluorescence lifetime microscopy has been widely used in quantifying cellular interaction or histopathological identification of different stained tissues. A novel, to the best of our knowledge, approach for high-throughput multiplexed fluorescence lifetime imaging is presented. To establish a high-throughput fluorescence lifetime acquisition system, a uniformed illumination optical focus array was generated by a novel computer-generated hologram algorithm based on matrix triple product. This, in conjunction with an array detector and multichannel time-correlated single-photon counting, enables the full use of the acquisition ability of each detector. By utilizing interval segmentation of photon time detection, a high-throughput multiplexed fluorescence lifetime imaging is achieved. Experimental results demonstrate that this method achieves a fivefold increase in the collection throughput of fluorescence lifetime and is capable of simultaneous dual-target fluorescence lifetime measurement.
Wavefront Modulation with Spatial Light Modulator for Fourier Ptychographic Microscopy

Jinlei Zhang,Xiao Tao,Qin Xie,Yan Sun,Zhenrong Zheng

DOI: https://doi.org/10.1117/12.2601379

2021-01-01

Abstract:Fourier ptychographic microscopy (FPM) is a recently developed computational imaging technology, which can bypass the limitation of optical-spatial-bandwidth product to achieve imaging with both high resolution and wide field-of-view. Original FPM setup is limited to image thin samples with angle-varied illuminations. A diffuser scanning FPM method, which scans a diffuser with unknown profile between the object and objective lens to modulate the complex exit wavefront of the object, is implemented to address this 3D refocusing problem. However, since the profile of the diffuser is unknown, the number of images required for method to converge is large. A mechanical translation stage is also required, which may introduce the systematic error of the position. In this paper, we propose a new FPM method with wavefront modulation imposed by spatial light modulator (SLM). The SLM is placed between the object and the objective lens to produce specific pattern profile, which is used to modulate the complex exit wavefront of the object. Fourier ptychographic phase retrieval process is employed to recovery the complex exit wavefront of the object. With the use of SLM, it is unnecessary to employ 2D motorized translation stage to move the imposed pattern profile so that the error of translation stage is eliminated. Moreover, since the imposed pattern profile is known, the number of images required for the algorithm to converge is reduced. Simulation and experiment are performed to validate the effectiveness of our proposed method. Compared with the method, which utilizes unknown diffuser, our method can achieve a more accurate reconstruction result with a faster data acquisition and higher convergence speed.
Surface wave illumination Fourier ptychographic microscopy.

Qiulan Liu,Yue Fang,Renjie Zhou,Peng Xiu,Cuifang Kuang,Xu Liu

DOI: https://doi.org/10.1364/OL.41.005373

IF: 3.6

2016-01-01

Optics Letters

Abstract:We propose a novel microscopy method, combining surface wave illumination and the Fourier ptychographic microscopy (FPM) algorithm to achieve super-resolution (SR) imaging. In our system, an oil-immersion objective lens is used to excite both the total internal reflection (TIR) evanescent waves and the surface plasmon waves (SPWs), which illuminate the sample with large wave vectors. Through the FPM algorithm, a resolution approximately twice that of conventional wide-field microscopy is obtained. Meanwhile, we could retrieve the sample's quantitative phase map in order to obtain its surface profile. Importantly, the field enhancement from a SPW has improved the contrast of the reconstructed images, which is critical for revealing the finer structural details of the specimen. In our experiments, we have imaged metallic gratings with a 120 or 150 nm wide line and trench features. We accurately retrieved their axial dimensions with a lateral resolution better than 240 nm that is close to the theoretical resolution of 215 nm, thus demonstrating the quantitative phase imaging capability of our technique. As this approach provides a label-free solution for intensity and phase imaging of samples with lateral resolution exceeding the limit introduced by the optical system, it can be potentially used in a wide range of noninvasive biological imaging applications. (C) 2016 Optical Society of America.
High-contrast and High-Stable Wavefront Shaping Multimode Fiber Imaging

Qing Yang,Zhong Wen,Chenlei Pang,Mingwei Tang,Xiaowei Liu

DOI: https://doi.org/10.1117/12.2575350

2020-01-01

Abstract:The main challenge in multimode fiber imaging is modal scrambling caused by environmental fluctuation. How to get high contrast and high stable imaging is the main question. In this presentation, we propose some methods to increase the contrast-to-noise ratio and stability of multimode fiber imaging. Wavelength modulation is introduced to suppress the background. Exhaustive bending effect was used to improve the imaging stability. Wavelength modulation is introduced to enhance the CNR four fold in a 200 μm field-of-view imaging. We show a near diffraction limited focusing capability at imaging depths of up to 150 µm with near constant lateral resolutions of 2.1 µm. The imaging of small fluorescent beads embedded in a 3D matrix was demonstrated.
Phase-coded Speckle Illumination for Laser Fourier Ptychographic Microscopy

Xiao Tao,Jinlei Zhang,Peng Sun,Chang Wang,Chenning Tao,Rengmao Wu,Zhenrong Zheng

DOI: https://doi.org/10.1016/j.optcom.2021.127199

IF: 2.4

2021-01-01

Optics Communications

Abstract:It remains a tough task for designing a microscopy system to approach the diffraction limit over a wide field of view due to its restricted space bandwidth product (SBP). Fourier ptychographic microscopy (FPM) has been developed to broaden the SBP of a conventional microscope platform without major hardware modifications. In this paper, we propose a novel FPM system based on the phase-coded speckle illumination, termed PSI-FPM, which employs a laser source with a speckle illumination control optical system. A phase-only spatial light modulator (SLM) with a condenser lens is utilized in the PSI-FPM system to project the phase-coded speckle illumination patterns onto the sample. The convolution between the sample spectrum and the illumination spectrum in the Fourier domain extend the numerical aperture of the objective that acts as a low-pass filter with cut-off frequency. The SLM is introduced in the PSI-FPM system to produce the specific illumination patterns so that the number of the captured images used for reconstruction are greatly reduced. In addition, the generated pattern is scanned to different directions without mechanical movement, which improves the robustness of the system. The PSI-FPM system is validated against simulations and experiments, and as a result reconstructs high-resolution images once the phase retrieval algorithm is employed. We envision that the PSI-FPM system will be suitable for many other speckle imaging applications.
Tunable-illumination for Laser Fourier Ptychographic Microscopy Based on a Background Noise-Reducing System

Xiao Tao,Jinlei Zhang,Chenning Tao,Peng Sun,Rengmao Wu,Zhenrong Zheng

DOI: https://doi.org/10.1016/j.optcom.2020.125764

IF: 2.4

2020-01-01

Optics Communications

Abstract:It is inherently difficult for a conventional microscopic imaging system to produce images with both wide field of view (FOV) and high-resolution because of its limited space bandwidth product. Fourier ptychographic microscopy (FPM) has been developed to overcome this limitation by using angle-varied illumination to enhance the performance of the system. In this paper, we propose a FPM imaging approach that employs a laser source with a newly developed illumination control optical system. The proposed system consists of a digital micromirror device and a zoom system with a condenser lens to provide sample illumination with angle-varied pattern directions and controllable pattern sizes. In addition, a total internal reflection prism is employed in the system to remove unexpected background noise and extend the FOV for reconstruction. The proposed system is validated against a USAF resolution target and a biological sample, and as a result reconstructs images with higher resolution and more details once the positional misalignment correction algorithm is employed. We envision that the proposed FPM system will be suitable for high-speed imaging applications.
Wavelength-multiplexing high-spectral resolution imaging based on Fourier ptychographic microscopy

Yanhui Cheng,Jufeng Zhao,Xiaorui Qu,Peiwei Zhang,Guangmang Cui

DOI: https://doi.org/10.1080/09500340.2024.2341640

IF: 1.3

2024-04-18

Journal of Modern Optics

Abstract:A wide field of view (FOV), high spectral resolution, and high spatial resolution are the targets of optical microscopic imaging. Fourier ptychographic microscopy (FPM) imaging can solve the contradiction between a wide FOV and spatial resolution. However, the spectral resolution of the samples is not accessible to typical LED-based FPM. Here, we report a wavelength-multiplexing high-spectral resolution reconstruction strategy based on the FPM of the halogen lamp. In contrast to the typical FPM setting, we can obtain spectral information of arbitrary wavelengths and greatly improve the sampling efficiency. We optimize and combine the wavelength-multiplexed decoupled algorithm with the high-spectral resolution reconstruction algorithm. We show that, by using our strategy, we can better reconstruct the image with a spectral resolution of 5 nm and maintain wide FOV and high spatial resolution. We believe the reported strategy may provide ideas for FPM-based spectral microimaging.

optics
High-speed Fourier Ptychographic Microscopy for Quantitative Phase Imaging.

Yi Xiao,Shiyuan Wei,Shaolong Xue,Cuifang Kuang,Anli Yang,Maoliang Wei,Hongtao Lin,Renjie Zhou

DOI: https://doi.org/10.1364/ol.428731

IF: 3.6

2021-01-01

Optics Letters

Abstract:Fourier ptychographic microscopy (FPM), as an emerging computational imaging method, has been applied to quantitative phase imaging with resolution bypassing the physical limit of the detection objective. Due to the weak illumination intensity and long image acquisition time, the achieved imaging speed in current FPM methods is still low, making them unsuitable for real-time imaging applications. We propose and demonstrate a high-speed FPM method based on using laser illumination and digital micro-mirror devices for illumination angle scanning. In this new, to the best of our knowledge, FPM method, we realized quantitative phase imaging and intensity imaging at over 42 frames per second (fps) with around 1 µm lateral resolution. The quantitative phase images have revealed membrane height fluctuations of red blood cells with nanometer-scale sensitivity, while the intensity images have resolved subcellular features in stained cancer tissue slices.
Fourier Ptychography for High Space-Bandwidth Product Microscopy

Liheng Bian,Jinli Suo,Qionghai Dai,Feng Chen

DOI: https://doi.org/10.1515/aot-2017-0054

2017-01-01

Advanced Optical Technologies

Abstract:Fourier ptychography is a novel imaging technique with high space-bandwidth product (SBP) on the scale of gigapixel, and has been successfully applied for high-resolution and large field-of-view (FOV) microscopy, termed Fourier ptychographic microscopy (FPM). FPM utilizes a low-numerical-aperture objective lens to capture multiple large FOV but low-resolution images under angularly varying illumination, and uses phase-retrieval algorithms to reconstruct the sample's high-resolution amplitude and phase information. FPM is advantageous over conventional high SBP microscopy techniques in many aspects, including no mechanical scanning, computational acquisition of both amplitude and phase, extended depth of focus, long working distance, and high compatibility with current microscopes. In this paper, we review FPM with its principles, multiple techniques to improve its performance, and its various applications and extensions.
Development and Assessment of Multiple Illumination Color Fourier Ptychographic Microscopy for High Throughput Sample Digitization

Patrik Gilley,Ke Zhang,Neman Abdoli,Youkabed Sadri,Laura Adhikari,Kar-Ming Fung,Yuchen Qiu

DOI: https://doi.org/10.3390/s24144505

IF: 3.9

2024-07-13

Sensors

Abstract:In this study, we proposed a multiplexed color illumination strategy to improve the data acquisition efficiency of Fourier ptychography microscopy (FPM). Instead of sequentially lighting up one single channel LED, our method turns on multiple white light LEDs for each image acquisition via a color camera. Thus, each raw image contains multiplexed spectral information. An FPM prototype was developed, which was equipped with a 4×/0.13 NA objective lens to achieve a spatial resolution equivalent to that of a 20×/0.4 NA objective lens. Both two- and four-LED illumination patterns were designed and applied during the experiments. A USAF 1951 resolution target was first imaged under these illumination conditions, based on which MTF curves were generated to assess the corresponding imaging performance. Next, H&E tissue samples and analyzable metaphase chromosome cells were used to evaluate the clinical utility of our strategy. The results show that the single and multiplexed (two- or four-LED) illumination results achieved comparable imaging performance on all the three channels of the MTF curves. Meanwhile, the reconstructed tissue or cell images successfully retain the definition of cell nuclei and cytoplasm and can better preserve the cell edges as compared to the results from the conventional microscopes. This study initially validates the feasibility of multiplexed color illumination for the future development of high-throughput FPM scanning systems.

engineering, electrical & electronic,chemistry, analytical,instruments & instrumentation
Multi-channel super-resolution with Fourier ptychographic microscopy

weixin jiang,yongbing zhang,qionghai dai

DOI: https://doi.org/10.1117/12.2071707

2014-01-01

Abstract:Fourier ptychographic microscopy (FPM) is a recently developed imaging method, which stitches together a sequence of low-resolution images in Fourier space in the iterative manner. However, the high-resolution color image super-resolved by this method always has problems of dispersion when compared to the high-resolution image observed under high-magnification lens. In this paper, we propose a new method for super-resolving multi-channel images. Instead of simply applying the FPM algorithm to RGB channels respectively, the method considers the relationship among each channel, which is employed to correct the result. Experimental results demonstrate that the dispersion can be eliminated, compared with the super-resolving multi-channel image got from original FPM algorithm. Besides, the robustness of Fourier ptychographic imaging is improved and the running time of the super-resolution of color images is reduced.
Using symmetric illumination and color camera to achieve high throughput Fourier ptychographic microscopy

Ke Zhang,Patrik Gilley,Neman Abdoli,Xuxin Chen,Kar‐Ming Fung,Yuchen Qiu

DOI: https://doi.org/10.1002/jbio.202200303

IF: 3.3899

2022-12-17

Journal of Biophotonics

Abstract:This study aims to develop a high throughput Fourier ptychographic microscopy (FPM) technique based on symmetric illumination and a color detector, which is able to accelerate image acquisition by up to 12 times. As an emerging technology, the efficiency of FPM is limited by its data acquisition process, especially for color microscope image reconstruction. To overcome this, we built an FPM prototype equipped with a color camera and a 4×/0.13 NA objective lens. During the image acquisition, two symmetric LEDs illuminate the sample simultaneously using white light, which doubles the light intensity and reduces the total captured raw patterns by half. A standard USAF 1951 resolution target was used to measure the system's modulation transfer function (MTF) curve, and the H&E‐stained ovarian cancer samples were then imaged to assess the feature qualities depicted on the reconstructed images. The results showed that the measured MTF curves of red, green, and blue channels are generally comparable to the corresponding curves generated by conventional FPM, while symmetric illumination FPM preserves more tissue details, which is superior to the results captured by conventional 20 × /0.4 NA objective lens. This investigation initially verified the feasibility of symmetric illumination based color FPM. This article is protected by copyright. All rights reserved.

optics,biochemical research methods,biophysics
A Fast Fourier Ptychographic Microscope Method with Biomedical Application

Chaijie Duan,Yawei Kuang,Hui Ma

DOI: https://doi.org/10.1117/12.2251897

2017-01-01

Abstract:Fourier ptychographic microscopy (FPM) is a newly reported techniques that bypasses the SBP barrier of conventional microscope platforms, which gets high-resolution (HR) images with large FOV. FPM uses an LED matrix as the illuminating source of the microscope. Each lighted LED corresponds to a low-resolution (LR) image. An HR image is generated from a set of LR images by FPM. Larger illuminating angle provides higher frequency information for the HR image. Therefore, FPM increases the NA of the low-NA objective lens while maintaining the large FOV. However, the process of FPM is usually time-consuming, since typically hundreds of LR images are recorded and equally involved in the iteration to maintain the quality of reconstruction. In this paper, we proposed a method to accelerate FPM reconstructing process, called Adaptive-FPM. Inspired by the concept of “keyhole imaging” in MRI, we set an energy change threshold in the reconstruction for each LR image to decide whether the image can be skipped in current iteration or not. In this way, some images will be skipped in further iteration, and the total reconstruction time can be reduced. The method was tested by both simulated data and biomedical data, which showed that the new method led to similar results with the original FPM method, while the run-time was reduced a lot.
Fourier ptychographic microscopy with sparse representation

Yongbing Zhang,Pengming Song,Jian Zhang,Qionghai Dai

DOI: https://doi.org/10.1038/s41598-017-09090-8

IF: 4.6

2017-01-01

Scientific Reports

Abstract:Fourier ptychographic microscopy (FPM) is a novel computational microscopy technique that provides intensity images with both wide field-of-view and high-resolution. By combining ideas from synthetic aperture and phase retrieval, FPM iteratively stitches together a number of variably illuminated, low-resolution intensity images in Fourier space to reconstruct a high-resolution complex sample image. Although FPM is able to bypass the space-bandwidth product (SBP) limit of the optical system, it is vulnerable to the various capturing noises and the reconstruction is easy to trap into the local optimum. To efficiently depress the noise and improve the performance of reconstructed high-resolution image, a FPM with sparse representation is proposed in this paper. The cost function of the reconstruction is formulated as a regularized optimization problem, where the data fidelity is constructed based on a maximum likelihood theory, and the regulation term is expressed as a small number of nonzero elements over an appropriate basis for both amplitude and phase of the reconstructed image. The Nash equilibrium is employed to obtain the approximated solution. We validate the proposed method with both simulated and real experimental data. The results show that the proposed method achieves state-of-the-art performance in comparison with other approaches.
Fourier Ptychographic Microscopy 10 Years on: A Review

Fannuo Xu,Zipei Wu,Chao Tan,Yizheng Liao,Zhiping Wang,Keru Chen,An Pan

DOI: https://doi.org/10.3390/cells13040324

IF: 6

2024-02-11

Cells

Abstract:Fourier ptychographic microscopy (FPM) emerged as a prominent imaging technique in 2013, attracting significant interest due to its remarkable features such as precise phase retrieval, expansive field of view (FOV), and superior resolution. Over the past decade, FPM has become an essential tool in microscopy, with applications in metrology, scientific research, biomedicine, and inspection. This achievement arises from its ability to effectively address the persistent challenge of achieving a trade-off between FOV and resolution in imaging systems. It has a wide range of applications, including label-free imaging, drug screening, and digital pathology. In this comprehensive review, we present a concise overview of the fundamental principles of FPM and compare it with similar imaging techniques. In addition, we present a study on achieving colorization of restored photographs and enhancing the speed of FPM. Subsequently, we showcase several FPM applications utilizing the previously described technologies, with a specific focus on digital pathology, drug screening, and three-dimensional imaging. We thoroughly examine the benefits and challenges associated with integrating deep learning and FPM. To summarize, we express our own viewpoints on the technological progress of FPM and explore prospective avenues for its future developments.

cell biology
Depth-of-field extended Fourier ptychographic microscopy without defocus distance priori

Yanqi Chen,Jinghao Xu,An Pan

DOI: https://doi.org/10.1364/ol.524267

IF: 3.6

2024-06-01

Optics Letters

Abstract:Yanqi Chen, Jinghao Xu, An Pan Fourier ptychographic microscopy (FPM) provides a solution of high-throughput phase imaging. Thanks to its coherent imaging model, FPM has ... [Opt. Lett. 49, 3222-3225 (2024)]

optics
Spectral multiplexing and coherent-state decomposition in Fourier ptychographic imaging

Siyuan Dong,Radhika Shiradkar,Pariksheet Nanda,Guoan Zheng

DOI: https://doi.org/10.1364/BOE.5.001757

2014-05-09

Abstract:Information multiplexing is important for biomedical imaging and chemical sensing. In this paper, we report a microscopy imaging technique, termed state-multiplexed Fourier ptychography (FP), for information multiplexing and coherent-state decomposition. Similar to a typical Fourier ptychographic setting, we use an array of light sources to illuminate the sample from different incident angles and acquire corresponding low-resolution images using a monochromatic camera. In the reported technique, however, multiple light sources are lit up simultaneously for information multiplexing, and the acquired images thus represent incoherent summations of the sample transmission profiles corresponding to different coherent states. We show that, by using the state-multiplexed FP recovery routine, we can decompose the incoherent mixture of the FP acquisitions to recover a high-resolution sample image. We also show that, color-multiplexed imaging can be performed by simultaneously turning on R/G/B LEDs for data acquisition. The reported technique may provide a solution for handling the partially coherent effect of light sources used in Fourier ptychographic imaging platforms. It can also be used to replace spectral filter, gratings or other optical components for spectral multiplexing and demultiplexing. With the availability of cost-effective broadband LEDs, the reported technique may open up exciting opportunities for computational multispectral imaging.

Wavelength multiplexed Fourier ptychograhic microscopy

Effect of spatial spectrum overlap on fourier ptychographic microscopy

Fourier Ptychographic Microscopy Using Wavelength Multiplexing

Digital micromirror device-based laser-illumination Fourier ptychographic microscopy.

High-throughput Multiplexed Fluorescence Lifetime Microscopy.

Wavefront Modulation with Spatial Light Modulator for Fourier Ptychographic Microscopy

Surface wave illumination Fourier ptychographic microscopy.

High-contrast and High-Stable Wavefront Shaping Multimode Fiber Imaging

Phase-coded Speckle Illumination for Laser Fourier Ptychographic Microscopy

Tunable-illumination for Laser Fourier Ptychographic Microscopy Based on a Background Noise-Reducing System

Wavelength-multiplexing high-spectral resolution imaging based on Fourier ptychographic microscopy

High-speed Fourier Ptychographic Microscopy for Quantitative Phase Imaging.

Fourier Ptychography for High Space-Bandwidth Product Microscopy

Development and Assessment of Multiple Illumination Color Fourier Ptychographic Microscopy for High Throughput Sample Digitization

Multi-channel super-resolution with Fourier ptychographic microscopy

Using symmetric illumination and color camera to achieve high throughput Fourier ptychographic microscopy

A Fast Fourier Ptychographic Microscope Method with Biomedical Application

Fourier ptychographic microscopy with sparse representation

Fourier Ptychographic Microscopy 10 Years on: A Review

Depth-of-field extended Fourier ptychographic microscopy without defocus distance priori

Spectral multiplexing and coherent-state decomposition in Fourier ptychographic imaging