Abstract:Recently, indoor localization using a single receiver has received significant attention. Despite the improvement of this, developing an accurate and universal system is still heavily required. In this article, we design and implement BiLoc, a decimeter level indoor localization system with hybrid measurements of a distributed single receiver. Specifically, different from the existing single receiver-based localization system, in BiLoc, some antennas of the array on the single receiver are distributed at different locations. To this end, BiLoc is based on the fact that the paths recorded on the same receiver incur common phase errors that are caused by nonsynchronization between the transmitter and the receiver. In BiLoc, first, some antennas of the antenna array are moved to different locations to locate the target. Then, BiLoc uses the 2-D matrix pencil (MP) to estimate the Angle of Arrival (AoA) and Time of Flight (ToF) of the multipath signals, which reduces the computational complexity effectively. After that, BiLoc constructs a nonlinear localization model by using the ToFs of the paths received at different antennas and AoAs measured at the antenna array, and then, an iterative algorithm based on the gradient of the localization objective function is used to solve this nonlinear problem. Because of combining hybrid AoA and ToF measurements, the proposed localization method is no longer sensitive to the selection of the initial guess of the target location. Finally, we implement BiLoc on the software-defined radio (SDR) X310 devices, and the designed prototype has six antennas with a maximum signal bandwidth of 100 MHz. The extensive experiments conducted in the practical indoor environments show that BiLoc achieves a median accuracy of 5 dm, which is comparable to the existing localization systems with decimeter level accuracy, and the localization delay is less than 100 ms. We believe that BiLoc can perform better in the emerging networks, such as 5G, becau-e wider bandwidth and more antennas can be provided.

SIABR: A Structured Intra-Attention Bidirectional Recurrent Deep Learning Method for Ultra-Accurate Terahertz Indoor Localization

A Structured Bidirectional LSTM Deep Learning Method for 3D Terahertz Indoor Localization

Sparse Bayesian Inference Based Direct Localization for Massive MIMO.

3D LiDAR-Based Global Localization Using Siamese Neural Network

A Channel Adaptive WiFi Indoor Localization Method Based on Deep Learning

Three-Dimensional Indoor Localization and Tracking for Mobile Target Based on WiFi Sensing

Toward Long-Term Effective and Robust Device-Free Indoor Localization via Channel State Information

Learning to Localize with Attention: from sparse mmWave channel estimates from a single BS to high accuracy 3D location

CRISLoc: Reconstructable CSI Fingerprinting for Indoor Smartphone Localization

3-D Spatial Spectrum Fusion Indoor Localization Algorithm Based on CSI-UCA Smoothing Technique

High Accuracy Indoor Localization: A Wifi-Based Approach

Localization with Transfer Learning Based on Fine-Grained Subcarrier Information for Dynamic Indoor Environments

Accurate Indoor Localization Based On Csi And Visibility Graph

Decimeter Level Indoor Localization Using Hybrid Measurements of a Distributed Single Receiver

Temporal-frequency Features Based Indoor Localization System under 5G Networks.

A CSI-Based Indoor Fingerprinting Localization with Model Integration Approach

CC-DTW: An Accurate Indoor Fingerprinting Localization Using Calibrated Channel State Information and Modified Dynamic Time Warping

Indoor Localization Based on CSI Fingerprint by Siamese Convolution Neural Network

A Three-Dimensional Wireless Indoor Localization System

Sensing User's Channel and Location with Terahertz Extra-Large Reconfigurable Intelligent Surface under Hybrid-Field Beam Squint Effect

CLRS: A Novel CSI-Based Indoor Localization Approach by Region Sectioning