Abstract:Hall-effect thrusters (HET) are a stationary form of electric propulsion that have been widely used in space missions. However, the wide range of the divergence angle of the HET plasma plume and the high ion velocities can result in a large area where collisions and plume interactions occur. Of these, low-energy charge-exchange (CEX) ions typically originate from collisions, and can result in severe deposition and sputtering issues on spacecraft components. In this work, we propose a novel magnetic Faraday probe in coordination with a particle-in-cell (PIC) simulation code. This system is able to deflect CEX ions with a changing solenoid current, and can be used to obtain the ion density and energy levels of CEX ions through experimental measurements. In addition, a Faraday probe, a retarding potential analyzer (RPA), and a Langmuir probe were used to obtain the beam characteristics. The CEX ion density at the beam edge area was determined to be in the level of 2.54 × 1012 m−3 (the local ion density of the plasma plume is in the level of 1013 m−3), and the ion energy level at the beam edge area was found to be below 30.1 eV. Due to the difference in the vacuum levels between ground tests and in-space operation, CEX collisions will be more severe during ground tests, and can affect plume measurements and erosion of the thruster. Two different vacuum levels were tested experimentally here to study the relationship between CEX ions and the background neutrals. As a result, it was found that a high background neutral density can exacerbate CEX collisions at the beam edge area, which results in an increase in the CEX ion density and a decrease in the CEX ion energy. This study brings us new information on the CEX ion density and energy distribution at the beam edge area from an experimental point of view. Furthermore, data on CEX ions energy can be used as input data for future plume simulations.

Performance and Plume Characteristics of a Hall-effect Thruster with Asymmetrical Gas Supply

Experimental Study of the Effect of Propellant Asymmetrical Distribution on Anode Current in a Hall Effect Thruster

Effect of Magnetic Field Configuration on Discharge Characteristic of a Hall Effect Thruster with a Variable Channel

Discharge Characteristics of a Kilowatt Hall Effect Thruster with a Variable Channel

Design of 1.5 kW-Level Anode Power Supply for Magnetic Focusing Hall Thruster

Study on the plasma plume structures in a cylindrical Hall thruster

Particle-in-cell simulation for effect of anode temperature on discharge characteristics of a Hall effect thruster

Two-dimensional Modeling of the Hall Thruster Discharge with Non-uniform Propellant Supply in Azimuth

An overview of discharge plasma modeling for Hall effect thrusters

Studies of a modulated Hall thruster

Experimental and numerical investigation of a Hall thruster with a chamfered channel wall

Influence of design and operation parameters on Hall thruster performances

Physics, simulation and diagnostics of Hall effect thrusters

Effect of Oscillating Sheath on Near‐Wall Electron Current Profile in Hall Thrusters

Plasma dynamics of Hall thrusters under pulsating operation

Atmospheric propellant fed Hall thruster discharges: 0D-hybrid model and experimental results

Performance and High-Speed Characterization of a 100-kW Nested Hall Thruster

Measurement of the distribution of charge exchange ions in a Hall-effect thruster plume

The influence of the inclination of strong magnetic field lines on the performance and plume divergence of a magnetically shielded Hall thruster

An Experimental Study of Local Magnetic Field Intensity Effects on the Discharge Characterization of Hall Thrusters

Hybrid Modeling of Miniaturized 50 W Annular Hall Thruster