Abstract:Homogenization-circulating ultrasound in combination with an aqueous enzymatic pretreatment microwave-assisted extraction (HCUEPM) technique was successfully applied to extract kernel oil and essential oil from Litsea cubeba fruits. After screening the types and concentrations of enzymes, a 3 % pectinase aqueous solution was chosen. The Plackett-Burman design was used to screen eight parameters that might affect the yield of kernel oil and essential oil to identify significant variables. The best conditions were then predicted by further optimizing statistically significant factors via the Box-Behnken design. The optimal conditions were as follows: stirring speed of 1000 r/min, environmental pH of 5, homogenization time of 4 min, duty cycle of 20 %, ultrasound irradiation power of 400 W, incubation temperature of 52.78 °C, liquid-solid ratio of 9.31 mL/g, and incubation time of 2.53 h. Three parallel experiments were conducted under these conditions, yielding actual kernel oil at 240.56 ± 11.07 mL/kg DW and essential oil at 64.89 ± 3.1 mL/kg DW, which are close to the theoretical values. Compared with the HCUEPM method, the homogenization-microwave-assisted hydrodistillation (HMHD) method yielded 65.63 ± 3.2 mL/kg DW of essential oil but could not extract kernel oil. These findings demonstrate that the HCUEPM used in this study can efficiently extract a significant amount of kernel oil and essential oil from L. cubeba fruits in a short period of time. GC-MS analysis of the kernel oil and essential oil extracted via different methods revealed no significant differences in composition. The main components of the essential oil were D-limonene, trans-citral, cis-citral, and citronellal. The main components of the kernel oil were C10 and C12 medium-chain fatty acids, laying the foundation for the potential application of L. cubeba kernel oil and essential oil in the field of human health.

Litsea cubeba kernel oil as a promising new medium-chain saturated fatty acid feedstock for biolubricant base oil synthesis

Synthesis and Characterization of Medium- and Long-Chain Structural Lipid Rich in Α-Linolenic Acid and Lauric Acid

Sustainable Valorization of <i>Litsea cubeba</i> (Lour.) Pers. Residue as the New Lauric Oil Source Using Alternative Green Extraction and Refining Methods

Transesterification of Methyl Oleate for Sustainable Production of Biolubricant: Process Optimization and Kinetic Study

Synthesis of T-Type low-viscosity hydrocarbon bio-lubricant from fatty acid methyl esters and coconut oil

Preparation of biodiesel from high-acid value litsea cubeba kernel oil

Characterization, Fractionation, and Compatibility Properties of Litsea Cubeba Kernel Oil with Potential Value for Industrial Application As a Lauric Acid-Based Oil Source

Synthesis and Oxidative Stability of Trimethylolpropane Fatty Acid Triester As A Biolubricant Base Oil from Waste Cooking Oil

Hydrothermal Liquefaction of Litsea Cubeba Seed to Produce Bio-Oils.

Conversion Of Lipid Into High-Viscosity Branched Bio-Lubricant Base Oil

Synthesis of Trimethylolpropane Fatty Acid Triester as Biolubricant from Palm-Based Methyl Esters and Trimethylolpropane

An Overview on Total Valorization of Litsea cubeba as a New Woody Oil Plant Resource toward a Zero-Waste Biorefinery

Process Intensified Lauric Acid Self-ketonization and its Economic and Environmental Impact on Biolubricant Base Oil Production

Biolubricant base stock with improved low temperature performance: Ester complex production using housefly (Musca domestica L.) larval lipid

Enzymatic Synthesis of Medium‐ and Long‐chain Triacylglycerols–enriched Structured Lipid from Cinnamomum Camphora Seed Oil and Camellia Oil by Lipozyme RM IM

A Renewable Lipid Source for Biolubricant Feedstock Oil from Housefly (musca Domestica) Larva

Lipase Catalysis of Α‐linolenic Acid‐rich Medium‐ and Long‐chain Triacylglycerols from Perilla Oil and Medium‐chain Triacylglycerols with Reduced By‐products

Production of Highly Symmetrical and Branched Biolubricants from Lignocellulose-Derived Furan Compounds

Biology and Chemistry of Litsea Cubeba, A Promising Industrial Tree in China

Thiol-promoted catalytic synthesis of high-performance furan-containing lubricant base oils from biomass derived 2-alkylfurans and ketones

Homogenization-circulating ultrasound in combination with aqueous enzymatic pretreatment for microwave-assisted extraction of kernel oil and essential oil from the fruit of Litsea cubeba