Abstract:Peridynamics (PD) becomes increasingly promising in computational fracture mechanics for its powerful ability to capture complex crack problems. Nevertheless, the PD applications are mainly limited to brittle fracture, and a robust PD model for predicting mixed mode fracture of quasi-brittle materials is still lacking. In this work, a novel damage model is proposed in the PD-CZM to accurately predict quasi-brittle failure under quasi-static mixed-mode loading, especially shear-dominated loading. In order to establish the damage criterion of quasi-brittle materials, the bond potential in bond based peridynamics (BBPD) is firstly separated into the dilatational part and deviatoric part. Instead of using existing bond stretch-based failure criterion, a new damage criterion obtained by combining bond stretch and dilatational bond potential is firstly proposed to determine the damage initiation. Also, the tension softening behavior of quasi-brittle materials is described in the damage model by a well-established degradation curve based on an energy-equivalence principle. Besides, to robustly solve the physical nonlinear characteristics, especially tension softening-induced snap-back phenomenon, the implicit implementation of the PD-CZM is performed with different implicit solution methods. Three challenging benchmarks are simulated to validate the proposed damage model, including Schlangen's single-edge notched beam test, Nooru-Mohamed's double edge-notched concrete specimen (DENS) test and Arrea and Ingraffea's single notched shear beam test with severe snap-back behavior. Both the predicted crack paths and the load-displacement curves are in perfect agreement with the experimental observations and other numerical results, clearly demonstrating the validity of the proposed damage model and the robustness of the implicit implementation. (C) 2021 Elsevier B.V. All rights reserved.

A peridynamic model for fracture analysis of polycrystalline BCC-Fe associated with molecular dynamics simulation

An Ordinary State-Based Peridynamic Model for Granular Fracture in Polycrystalline Materials with Arbitrary Orientations in Cubic Crystals

A 3D peridynamic model for fracture analysis of transversely isotropic solids

A peridynamics-based cohesive zone model (PD-CZM) for predicting cohesive crack propagation

Improved Discontinuous Deformation Analysis Method for Modeling Tensile Cracking in Quasi-Brittle Materials

Heterogeneous Deformation and Damage Mechanisms in Multi-Phase TA15 Ti-alloy: Insights from Experiments Informed Damage-Crystal Plasticity Modelling

A Novel Damage Model In The Peridynamics-Based Cohesive Zone Method (Pd-Czm) For Mixed Mode Fracture With Its Implicit Implementation

An Approach of Peridynamic Modeling Associated with Molecular Dynamics for Fracture Simulation of Particle Reinforced Metal Matrix Composites

A thermo-chemo-mechanically coupled peridynamics for investigating crack behavior in solids

An Improved Peridynamic Model with Energy-Based Micromodulus Correction Method for Fracture in Particle Reinforced Composites

An Improved Ordinary State-Based Peridynamic Model for Granular Fractures in Cubic Crystals and the Effects of Crystal Orientations on Crack Propagation

Peridynamic Simulation of Fatigue Crack Growth Behaviour with the Effect of Microstructure

A Dissipation Informed Peridynamic Model for Dynamic Brittle Fracture

An Orthotropic Peridynamic Shell Model for Linear Elastic Deformation and Crack Propagation

Multi-time-step coupling of peridynamics and classical continuum mechanics for dynamic brittle fracture

Peridynamic-based investigation of the cracking behavior of multilayer thermal barrier coatings

Mechanisms Governing Crack Speed in Peridynamic Model

Numerical Modeling on Crack Propagation Based on a Multi-Grid Bond-Based Dual-Horizon Peridynamics

INFLUENCE OF SURFACE EFFECT CORRECTION ON PERIDYNAMIC SIMULATION OF DYNAMIC FRACTURES IN BRITTLE MATERIALS

Crack Nucleation in Brittle and Quasi-Brittle Materials: A Peridynamic Analysis

Strength-induced peridynamic modeling and simulation of fractures in brittle materials