Abstract:Perfobond connectors are commonly used to transfer the shear force with the transverse bar sheared off as the failuremode in steelconcrete composite structures. However, the perfobond connectors used to prevent the steel-concrete interface from separating in composite structures with load bearing steel bars that cannot be sheared off urgently need to be studied. Experimental and analytical studies were conducted to develop a novel thin-rib perfobond connector used in steel-concrete composite bridge towers. Based on the load characteristics of the Nanjing No. 5 Yangtze River Bridge tower, which is the first double-steel-plate concrete composite cable-stayed bridge tower in the world, the pull-out performance of the perfobond connectors in the large-scale composite tower were studied. Thin ribs were adopted in the connectors to avoid shearing off the longitudinal steel bars during the pull-out process. The coupling pull-out performance between adjacent perfobond connectors was investigated to demonstrate the performance differences between the multihole and the single-hole thin-rib perfobond connectors. The effects of the plate thickness, the distance from hole edge to rib bottom, the distance from hole edge to rib side, the hole diameter, the transverse bar diameter, and the transverse bar position in the connector hole were examined based on the experiments of 24 single-hole specimens and 24 trihole specimens. All stages of the load-displacement curves were calibrated, and the strain history of the steel parts was discussed. The main failure mode observed from the pull-out tests was steel plate fracture. Failure mechanism analysis showed that the position of the transverse bar in the hole affected the bearing capacity, stiffness, and ductility of the connector. Considering the effect of hole numbers, the hole-side part of a multihole thin-rib perfobond connector was relatively strengthened. An analytical model and calculation formulas to predict the pullout capacity of the thin-rib perfobond connectors were further established, and the proposed method was found to be in good agreementwith the experimental results, offering theoretical guidance for engineering practice. (c) 2019 American Society of Civil Engineers.

Pull-out Performance and Optimization of a Novel Interference-fit Rivet for Composite Joints

Influence of Interference Fit Size on Hole Deformation and Residual Stress in Hi-Lock Bolt Insertion

Strengthening of Composite T-joints Using Ø 0.11 Mm Z-pins Via an Ultrasound-Guided Insertion Process

Effect of Interference Fit Size on Local Stress in Single Lap Bolted Joints

A Novel Method for Through-Thickness Reinforcement of Laminated Composites Using Discrete Micro-Polarization-induced Fiber Injection (DMFI) Approach

Analysis of Process Parameters Influencing Protuberance During Interference Fit Installation of Hi-lock Bolts

Analysis and optimization of rivet load distribution in multi-rivet connections of thermoplastic composite rivets

Effect of electromagnetic force installation method on critically reinforced interference sizes and fatigue behavior of CFRP bolted joints

Pull-Through Behavior of Novel Additively Manufactured Sandwich Composite Inserts

Effect of Riveting Displacement on the Mechanical Behavior of CFRP Bolted Joints with Elliptical-Head Non-Lug Self-Locking Rivet Nut

Mechanistic Study of Failure in CFRP Hybrid Bonded–Bolted Interference Connection Structures under Tensile Loading

Experimental study and finite element analysis on the joining performance of GF/PP rivets

An experimental investigation on press joining mechanism and bearing behavior of single-lap composite riveted joints

Rivet Structural Design and Process Optimization for the Double-Sided Countersunk Riveting of Composite Wedge Structures

A progressive damage model for carbon fiber-reinforced polymer laminates subjected to fastener pull-through failure

Experimental research on pull-out behavior of steel-UHPC composite beams with new composite dowels connectors

Enhancing the Robustness of Hybrid Metal-Composite Connections Through 3D Printed Micro Penetrative Anchors

A Non-Uniform Interference-Fit Size Investigation of CFRP/Al Alloys by Riveting Mold Design

Effect of imbalanced interface pre-tightening force on the bearing behavior of carbon fiber reinforced polymer interference-fit lap joint

Experimental and Analytical Investigation on Pull-Out Performance of Multihole Thin-Rib Perfobond Connectors

Study on failure characteristics of fiber reinforced composite structural connections