Fabrication of Reversible Ph-Responsive Aggregation-Induced Emission Luminogens Assisted by a Block Copolymer Via a Dynamic Covalent Bond

Meiyao Wang,Lili Xu,Min Lin,Zhibo Li,Jing Sun

DOI: https://doi.org/10.1039/d1py00312g

IF: 4.6

2021-01-01

Polymer Chemistry

Abstract:Aggregated induced emission (AIE) molecules with stimuli-responsive properties have attracted increasing attention for many applications.

What problem does this paper attempt to address?

Pyrene-Based Red-Emitting Aggregation-Induced Emission Luminogens: from Structural Construction to Anti-Counterfeiting Applications

Hualong Li,Zeng-Min Xue,Guang Yang,Fei Meng,Hongtao Lin,Wen-Xuan Zhao,Shuhai Chen,Chuan-Zeng Wang

DOI: https://doi.org/10.1039/d4qm00927d

IF: 8.6834

2025-01-01

Materials Chemistry Frontiers

Abstract:Herein, we demonstrated a novel approach to construct pyrene-based high efficiency red color emission molecules. Both luminogens present obvious aggregation−induced enhanced emission (AIEE) properties and distinct mechanochromic behavior with a...
New Tetraphenylpyridinium-Based Luminogens with Aggregation-Induced Emission Characteristics

ZongTan Wang,Yuan Fang,JingZhi Sun,AnJun Qin,Ben Zhong Tang

DOI: https://doi.org/10.1007/s11426-013-4933-6

2013-01-01

Science China Chemistry

Abstract:The research on aggregation-induced emission (AIE) has drawn increasing interests in the past decade. With the efforts scientists paid, a variety of AIE systems have been developed, among which the tetraphenylethelene and silole derivatives are the most studied. Development of new AIE systems could further enrich the AIE molecules and promote the development of AIE area. In this communication, we prepared a new AIE system based on 1,2,4,6-tetraphenylpyridinium ions according to the restriction of intramolecular rotation mechanism. These molecules could be facilely synthesized via one-step and one-pot reaction. The ionic AIE-active molecules could find wide application in sensing and optoelectronic areas.
Tunable Aggregation-Induced Emission Fluorophore with the Assistance of the Self-Assembly of Block Copolymers by Controlling the Morphology and Secondary Conformation for Bioimaging

Sifan Ji,Min Lin,Zenghao Li,Lili Xu,Xiaohui Fu,Guosong Chen,Zhibo Li,Jing Sun

DOI: https://doi.org/10.1021/acs.biomac.1c01220

2022-01-01

Biomacromolecules

Abstract:Aggregation-induced emission (AIE) luminogens with highly tunable properties show great potential for many applications. In this study, we synthesized a new family of AIE-type poly(ethylene glycol)-block-poly(9-anthrylmethyl lysine) (PEG-b-PLys-An) diblock copolymers by taking advantage of amphiphilic self-assembly and rigid helical backbones. These copolymers can self-assemble into various assemblies through nanoprecipitation methods. The micelles using N,N-dimethylformamide (DMF) as a cosolvent present brighter fluorescence than the vesicles prepared from tetrahydrofuran (THF). We demonstrate that the decreased solubility of copolymers in DMF results in the formation of more compact micelles with more excimer formation during the self-assembly process, while better solvent THF favors the formation of vesicles with stretched core chains. In addition, the secondary conformation of the polypeptide block shows pronounced effects on the fluorescence property. We further show the internalization of the assemblies using two types of cells by cellular uptake experiments. By the delicate design of the block copolymer, we successfully prepare the morphology- and conformation-dependent AIE materials for potential biomedical applications.
Aggregation-Induced Emission Encoding Supramolecular Polymers Based on Controllable Sulfonatocalixarene Recognition in Aqueous Solution

Xuyang Yao,Xiang Ma,He Tian

DOI: https://doi.org/10.1039/c4tc00503a

IF: 6.4

2014-01-01

Journal of Materials Chemistry C

Abstract:A pH-responsive supramolecular polymer based on a homoditopic bis-p-sulfonatocalixarene host and a tetraphenylethylene derivative guest as building blocks with aggregation-induced emission (AIE) property is fabricated in aqueous solution. Quite different from usual supramolecular polymers constructed before, this novel supramolecular polymer has high luminescence efficiency rather than becoming lowluminescent after polymerization. Interestingly, the AIE signals are switchable between two alternative emission wavelengths in H2O or with ON and OFF switching in the mixing H2O-THF = 1 : 1 solution, which are realized by controllable and reversible supramolecular interactions. This strategy to design supramolecular polymers with switchable AIE property overcomes the common problem of aggregation-caused quenching (ACQ) in usual supramolecular polymers and provides a new concept to develop smart supramolecular polymeric materials.
The Marriage of Aggregation‐Induced Emission with Polymer Science

Zijie Qiu,Xiaolin Liu,Jacky W. Y. Lam,Ben Zhong Tang

DOI: https://doi.org/10.1002/marc.201800568

IF: 5.006

2018-01-01

Macromolecular Rapid Communications

Abstract:Aggregation-induced emission (AIE) is a novel photophysical phenomenon coined in 2001 by our group and describes the enhanced light emission of some luminogens in the aggregate or solid state. The combination of AIE research and polymer science is a smart approach to produce functional luminescent materials with mechanical strength and excellent processability for real-world applications. In this feature article, recent progress in AIE polymeric systems, including chemical synthesis and physical blending strategies, is summarized. Through chemical synthesis, various AIE-active polymers, such as covalently bonded polymers, supramolecular polymers, and nonconjugated luminescent polymers, can be obtained. Serving as environmentally sensitive probes, AIE luminogens can also be physically doped into polymers to generate interesting systems. Finally, outlooks and perspectives on the future direction of AIE polymeric systems are discussed.
Aggregation-Induced Emission of Tetraarylethene Luminogens

Zujin Zhao,Jacky W. Y. Lam,Ben Zhong Tang

DOI: https://doi.org/10.2174/138527210793351571

2015-01-01

Abstract:It has been a textbook knowledge that chromophore aggregation generally quenches light emission. While in 2001, we discovered a novel phenomenon of aggregation-induced emission (AIE): a series of propeller-shaped molecules were found nonluminescent in the solution state but emissive in the aggregate and solid states. Attracted by the intriguing phenomenon and its fascinating perspectives, we launched a research program on developing new AIE luminogens and exploring their high-tech applications. In this review, we present our recent works on developing a novel AIE system based on tetraarylethenes. We show that restriction of intramolecular rotation is the main cause for the AIE effect. Utilizing such treasured AIE characteristics, the tetraarylethenes can find an array of applications, including fluorescence sensors, biological probes, and active materials in the fabrication of organic light-emitting diodes.
Recent Application Progress on Aggregation-Induced Emission

guosheng zhao,chuanxing shi,zhiqian guo,weihong zhu,shiqin zhu

DOI: https://doi.org/10.6023/cjoc201203012

2012-01-01

Chinese Journal of Organic Chemistry

Abstract:Luminescence of conventional fluorophores often becomes weakened or quenched at high concentration or solid state. In contrast, some are non-luminescent in solution but highly emissive in the aggregate or solid state, so called "aggregation-induced emission (AIE)", which might be resulted from the restriction of intramolecular rotation (RIR) and changes in aggregate morphology. Herein, the latest progress on ALE since 2008 is reviewed, such as: (i) developing chemo- or bio-sensors for detecting ions, gas, small molecules, explosives, proteins, enzymes and so on; (ii) incorporating the AIE unit to realize highly luminescent solid emitters, especially for OLEDs (organic light-emitting diodes); (iii) tuning the aggregation morphology to construct reversible multi-responsive materials stimulated by pressure, heat or solvent vapor; (iv) due to the biocompatibility of aggregate nanoparticles, developing hybrid materials including fluorescent silica nanoparticles, polymeric micelles and electrolytes for applications in cell imaging, structure analysis and bioassay.
A positively charged aggregation-induced emission (AIE) luminogen as an ultra-sensitive mechanochromic luminescent material: design, synthesis and versatile applications

Weidong Yin,Zengming Yang,Shaoxiong Zhang,Yuan Yang,Lixia Zhao,Zhao Li,Bo Zhang,Shengjun Zhang,Bingyang Han,Hengchang Ma

DOI: https://doi.org/10.1039/d0qm01047b

IF: 8.6834

2021-01-01

Materials Chemistry Frontiers

Abstract:Nowadays, the rational design of a mechanochromic luminescent (ML) material with ultra-sensitivity toward external stimuli is a greatly challenging task.

materials science, multidisciplinary,chemistry
Visualizing Material Processing via Photoexcitation-Controlled Organic-Phase Aggregation-Induced Emission

Jian Gu,Bingbing Yue,Glib V. Baryshnikov,Zhongyu Li,Man Zhang,Shen Shen,Hans Ågren,Liangliang Zhu

DOI: https://doi.org/10.34133/2021/9862093

IF: 11

2021-06-07

Research

Abstract:Aggregation-induced emission (AIE) has been much employed for visualizing material aggregation and self-assembly. However, water is generally required for the preparation of the AIE aggregates, the operation of which limits numerous material processing behaviors. Employing hexathiobenzene-based small molecules, monopolymers, and block copolymers as different material prototypes, we herein achieve AIE in pure organic phases by applying a nonequilibrium strategy, photoexcitation-controlled aggregation. This strategy enabled a dynamic change of molecular conformation rather than chemical structure upon irradiation, leading to a continuous aggregation-dependent luminescent enhancement (up to ~200-fold increase of the luminescent quantum yield) in organic solvents. Accompanied by the materialization of the nonequilibrium strategy, photoconvertible self-assemblies with a steady-state characteristic can be achieved upon organic solvent processing. The visual monitoring with the luminescence change covered the whole solution-to-film transition, as well as the in situ photoprocessing of the solid-state materials.

multidisciplinary sciences
A "simple'' donor-acceptor AIEgen with multi-stimuli responsive behavior

Jing Zhang,Aisen Li,Hang Zou,Junhui Peng,Jiali Guo,Wenjie Wu,Haoke Zhang,Jun Zhang,Xinggui Gu,Weiqing Xu,Shuping Xu,Sheng Hua Liu,Anjun Qin,Jacky W. Y. Lam,Ben Zhong Tang

DOI: https://doi.org/10.1039/c9mh01041f

IF: 13.3

2020-01-01

Materials Horizons

Abstract:There is still an urgent demand for novel smart materials that can achieve a diverse range of practical applications in the synthetic material area. Herein, we developed a simple but versatile aggregation-induced emission luminogen (AIEgen, 1). Compound 1 was sensitive to an electric stimulus and displayed reversibly three-color switched electrochromism and on-to-off electroluminochromism. Such properties allowed the fabrication of high-performance non-doped OLEDs with a high external quantum efficiency of 5.22%. Due to its AIE property and remarkable sensitive color change in response to polarity change, it can serve as a unique imaging probe for detecting environmental polarity in cells and selective visualization of lipid droplets in live tissues. More impressively, compound 1 exhibited a wide range of thermoresponsive behaviors with a ratiometric luminescence change and noticeable fluorescence color switching. As another remarkable feature, it can respond to anisotropic shearing force and isotropic hydrostatic pressure with prominent and contrasting luminescence conversion due to the distinct disturbance of the weak intermolecular interactions and charge transfer process. The present results may offer an important guideline for multifunctional molecular design and provide an important step forward to expand the real-life applications of smart materials.
Luminogenic Polymers With Aie Characteristics

Anjun Qin,Ming Chen,Ben Zhong Tang

DOI: https://doi.org/10.1021/bk-2016-1227.ch002

2016-01-01

Abstract:Since conceptually proposed by Tang et al. in 2001, the aggregation-induced emission (AIE) has caused tremendous interests among scientists worldwide. Currently, hundreds of ME-active luminogens have been designed and prepared, but most of them are small molecular ones. However, the AIE-active polymers possess charming advantages, such as mutable and tunable molecular structure, excellent film-foming ability and facile processability, thus, are potentially applied in diverse high-tech areas, like fluorescent chemo- and bio-sensors, optoelectronic devices and so on. In this chapter, we first summarize the types of the presented AIE-active polymers by incorporating AIE-active units, such as tetraphenylethene (TPE), multi-phenyl substituted siloles and distyrylanthracene (DSA). In addition, a new kind of luminogenic polymers containing unconventional chromophore, such as poly(amido amine) (PAMAM), poly(amino ester) and poly[(maleic anhydride)-alt-(vinyl acetate)], are also discussed. Our aim is to establish a structure-property relationship of AIE-active polymers, and further demonstrate how to control the AIE-activity of the polymers via intelligent and rational molecular design.
Construction and modulation of aggregation‐induced emission materials based on dynamic covalent bonds

Mingxin Zheng,Yang Wang,Danning Hu,Mei Tian,Yen Wei,Jinying Yuan

DOI: https://doi.org/10.1002/agt2.624

2024-08-25

Aggregate

Abstract:This review summarizes the current progress in aggregation‐induced emission (AIE) materials incorporated with dynamic covalent bonds (DCBs), including Diels–Alder, imine, transesterification, boronic ester, and disulfide bonds. DCBs‐based AIE materials are endowed with the characteristics of facile preparation, self‐adaptation, and stimuli‐responsiveness. We hope the review is helpful for the design of the AIE materials for more broad applications. The remarkable advantages and promising application potentials of aggregation‐induced emission (AIE) materials have seen significant advancements in recent years. Notably, AIE materials incorporating dynamic covalent bonds (DCBs) have garnered escalating attention and demonstrated remarkable progress due to their reversible and self‐adaptive properties, thus exhibiting immense potential across various domains including biomedicine, nanomaterials, sensing, and optical displays. This review aims to provide a comprehensive overview of the recent strides in DCBs‐based AIE materials, organized by the types of dynamic covalent bonds utilized, such as Diels–Alder reaction, imine bond, transesterification, boronic ester bond, disulfide bond, [2+2] Cycloaddition Reaction and X‐yne adducts exchange. Through exemplifying representative cases, we elucidate the design principles of chemical structures and the diverse dynamic behaviors exhibited by DCBs‐based AIE materials. Leveraging the principles of dynamic covalent chemistry, these emissive materials can be facilely prepared, and they possess inherent self‐adaptability and responsiveness to stimuli. Finally, we present succinct conclusions and discuss future trends in this burgeoning field, offering fresh insights into the design of novel luminescent materials based on dynamic covalent bonds for broader applications.

chemistry, multidisciplinary, physical,materials science
Recent Advances in Aie Polymers

Rongrong Hu,Yuan Kang,Ben Zhong Tang

DOI: https://doi.org/10.1038/pj.2016.1

IF: 3.135

2016-01-01

Polymer Journal

Abstract:Aggregation-induced emission (AIE) polymers are a series of novel luminescent materials. These materials have experienced an exponential growth of research interests and are rapidly developing into an emerging field. AIE polymers boast high aggregated-state emissions, diverse structures and the use of various synthetic methods for preparation; they also demonstrate good solubility and processability compared with AIE small molecules. Furthermore, additional functionalities can be introduced into AIE polymers through a large number of simple and convenient synthetic strategies. Great progress has been made after the publication of a comprehensive review on AIE macromolecules. Herein, the newly developed AIE polymer systems are summarized, with an emphasis on the synthetic methods used to generate the polymers and their structures and applications. The structural design and synthetic approaches of a series of functional nonconjugated or conjugated AIE linear polymers with AIEgens on the side chains or main chains, as well as star-shaped or hyperbranched AIE polymers with AIEgens on the core or terminal parts are discussed. The advanced performance of AIE polymers in a series of practical applications, such as fluorescent sensors, stimuli-responsive materials, biological applications, porous materials and circularly polarized luminescence, is also introduced. The rapid development and large variety of potential applications of AIE polymers have demonstrated that this prosperous and promising field presents great opportunities.
AIE-active macromolecules: designs, performances, and applications

Fei Zhang,Hui Xie,Bing Guo,Caizhen Zhu,Jian Xu

DOI: https://doi.org/10.1039/d1py01167g

IF: 4.6

2022-01-01

Polymer Chemistry

Abstract:Aggregation-induced emission (AIE) macromolecules as emerging luminescent materials gained increasing attention owing to their good processability, high brightness, wide functionality, and smart responsiveness, with great potential in many fields.

polymer science
Photoresponsive Aggregation-Induced Emission Polymer Film for Anti-Counterfeiting

Hong Yang,Mengqi Li,Weijun Zhao,Zhiqian Guo,Wei-Hong Zhu

DOI: https://doi.org/10.1016/j.cclet.2021.05.053

IF: 9.1

2021-01-01

Chinese Chemical Letters

Abstract:The development of solid-state smart materials, in particular those showing photoresponsive luminescence, is highly desirable for their cutting edge applications in displays, sensors, data-storage, and anti-counterfeiting. However, to achieve both excellent photoresponsive performance and bright luminescence in solid state remains challenge. Herein, we integrate a novel photochromic fluorophore YL into flexible polymer chains, thereby enabling the resultant polymer PYL with reversible photoisomerization upon aggregation. Remarkably, the polymer PYL possesses excellent photochromic properties and aggregation-induced emission (AIE) activity, which can be attributed to the photoactive YL moiety. Upon light exposure, its film exhibits reversibly off-to-on fluorescent modulation with quick response, high emission efficiency and signal contrast, sharply different from the weak emission in solution. The novel photoresponsive AIE polymer with invisible/visible color and fluorescence transformation allows for advanced anti-counterfeiting applications. This work provides an efficient platform for constructing solid-state photocontrollable luminescent materials.
Precise Molecular Design for High‐Performance Luminogens with Aggregation‐Induced Emission

Shidang Xu,Yukun Duan,Bin Liu

DOI: https://doi.org/10.1002/adma.201903530

IF: 29.4

2019-01-01

Advanced Materials

Abstract:Precise design of fluorescent molecules with desired properties has enabled the rapid development of many research fields. Among the different types of optically active materials, luminogens with aggregation‐induced emission (AIEgens) have attracted significant interest over the past two decades. The negligible luminescence of AIEgens as a molecular species and high brightness in aggregate states distinguish them from conventional fluorescent dyes, which has galvanized efforts to bring AIEgens to a wide array of multidisciplinary applications. Herein, the useful principles and emerging structure–property relationships for precise molecular design toward AIEgens with desirable properties using concrete examples are revealed. The cutting‐edge applications of AIEgens and their excellent performance in enabling new research directions in biomedical theranostics, optoelectronic devices, stimuli‐responsive smart materials, and visualization of physical processes are also highlighted.
Mechanism and application of aggregation induced luminescence compounds

Zhongan Xu

DOI: https://doi.org/10.1088/1755-1315/680/1/012073

2021-03-01

IOP Conference Series: Earth and Environmental Science

Abstract:Abstract Organic Light-Emitting Diode (OLED) technology has gained wide acceptance in recent years. The popularity of OLED is attributed to the superior properties of organic luminescent materials such as low biotoxicity, outstanding optical properties and easy preparation and modification. Traditional organic luminescent materials usually suffer from aggregation-caused quenching (ACQ) effect and can be hardly utilized in aqueous or solid conditions, while the compounds exhibiting aggregation-induced emission (AIE) property can overcome this limitation. Thus, AIE luminogens have attracted wide attention in the past ten years. Based on the research on the mechanism, classification and application of AIE compounds, a novel aggregation induced luminescence compound based on triphenylamine structure was synthesized and characterized. Our work suggested and confirmed that the synthesized compound showed apparent aggregation-induced emission (AIE) property.
Molecular and Aggregate Synergistic Engineering of Aggregation-Induced Emission Luminogens to Manipulate Optical/Electronic Properties for Efficient and Diversified Functions

Zheng Zheng,Tianyu Yang,Dongyu Li,Hui Cao,Junyi Gong,Haixiang Liu,Chengcheng Zhou,Lijie Liu,Peifa Wei,Xinggui Gu,Ping Lu,Jun Qian,Ben Zhong Tang

DOI: https://doi.org/10.1021/acsnano.3c02134

IF: 17.1

2023-04-20

ACS Nano

Abstract:The optical/electronic properties of organic luminescent materials can be regulated by molecular structure modification, which not only requires sophisticated and time-consuming synthesis but also is unable to accurately afford the optical properties of materials in the aggregate state. Herein, a facile strategy of molecular and aggregate synergistic engineering is proposed to manipulate the optical/electronic properties of a luminogen, ACIK, in the solid state for efficient and diversified...

materials science, multidisciplinary,chemistry, physical,nanoscience & nanotechnology
Photochemically Enhanced Emission by Introducing Rational Photoactive Subunits into an Aggregation-Induced Emission Luminogen.

Qiaozhi Zhu,Yuqing Zhu,Weidong Liu,Xinni Ping,Xuting Cai,Jiaqi Zuo,Zhaosheng Qian,Hui Feng

DOI: https://doi.org/10.1002/chem.202202178

2022-01-01

Chemistry

Abstract:Herein, we propose a rational design strategy by introducing photoactive thienyl and pyridyl groups into an AIE-active tetraarylethene skeleton to achieve highly efficient photochemistry-activated fluorescence enhancement from dominantly photo-physical aggregation-induced emission behavior, and prove that such photoactivated fluorescence enhancement is perfectly suited for superstable photocontrollable dual-mode patterning applications in both solution and solid matrix. It is found that the photoactivated fluorescence of designed AIEgen is attributed to the irreversible cyclized-dehydrogenation reaction under UV irradiation, and the oxidation product has a brighter fluorescence in both solution and solid states owning to its rigid and planar structure. The overall transformation rate of the AIEgen from its opened form to dehydrogenated form is up to nearly 100 % in a short period of UV irradiation, and the fast transformation and the stable product of this photochemical reaction guarantees super stability of photocontrolled patterning, which can be applied in photoactivated dual-mode patterning and advanced anti-counterfeiting.
Phototriggered Aggregation‐Induced Emission and Direct Generation of 4D Soft Patterns

Huilin Xie,Zhao Li,Junyi Gong,Lianrui Hu,Parvej Alam,Xiaofan Ji,Yubing Hu,Joe H. C. Chau,Jacky W. Y. Lam,Ryan T. K. Kwok,Ben Zhong Tang

DOI: https://doi.org/10.1002/adma.202105113

IF: 29.4

2021-10-04

Advanced Materials

Abstract:Microscopic control of macroscopic phenomena is one of the core subjects in materials science. Particularly, the spatio-temporal control of material behaviors through a non-contact way is of fundamental importance but is difficult to accomplish. Herein, a strategy to realize remote spatio-temporal control of luminescence behaviors is reported. A multi-arm salicylaldehyde benzoylhydrazone-based aggregation-induced emission luminogen (AIEgen)/metal-ion system, of which the fluorescence can be gated by the UV irradiation with time dependency, is developed. By changing the metal-ion species, the fluorescence emission and the intensity can also be tuned. The mechanism of the UV-mediated fluorescence change is investigated, and it is revealed that a phototriggered aggregation-induced emission (PTAIE) process contributes to the behaviors. The AIEgen is further covalently integrated into a polymeric network and the formed gel/metal-ion system can achieve laser-mediated mask-free writing enabled by the PTAIE process. Moreover, by further taking advantage of the time-dependent self-healing property of hydrazone-based dynamic covalent bond, transformable 4D soft patterns are generated. The findings and the strategy increase the ways to manipulate molecules on the supramolecule or aggregate level. They also show opportunities for the development of controllable smart materials and expand the scope of the materials in advanced optoelectronic applications.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology

Fabrication of Reversible Ph-Responsive Aggregation-Induced Emission Luminogens Assisted by a Block Copolymer Via a Dynamic Covalent Bond

Pyrene-Based Red-Emitting Aggregation-Induced Emission Luminogens: from Structural Construction to Anti-Counterfeiting Applications

New Tetraphenylpyridinium-Based Luminogens with Aggregation-Induced Emission Characteristics

Tunable Aggregation-Induced Emission Fluorophore with the Assistance of the Self-Assembly of Block Copolymers by Controlling the Morphology and Secondary Conformation for Bioimaging

Aggregation-Induced Emission Encoding Supramolecular Polymers Based on Controllable Sulfonatocalixarene Recognition in Aqueous Solution

The Marriage of Aggregation‐Induced Emission with Polymer Science

Aggregation-Induced Emission of Tetraarylethene Luminogens

Recent Application Progress on Aggregation-Induced Emission

A positively charged aggregation-induced emission (AIE) luminogen as an ultra-sensitive mechanochromic luminescent material: design, synthesis and versatile applications

Visualizing Material Processing via Photoexcitation-Controlled Organic-Phase Aggregation-Induced Emission

A "simple'' donor-acceptor AIEgen with multi-stimuli responsive behavior

Luminogenic Polymers With Aie Characteristics

Construction and modulation of aggregation‐induced emission materials based on dynamic covalent bonds

Recent Advances in Aie Polymers

AIE-active macromolecules: designs, performances, and applications

Photoresponsive Aggregation-Induced Emission Polymer Film for Anti-Counterfeiting

Precise Molecular Design for High‐Performance Luminogens with Aggregation‐Induced Emission

Mechanism and application of aggregation induced luminescence compounds

Molecular and Aggregate Synergistic Engineering of Aggregation-Induced Emission Luminogens to Manipulate Optical/Electronic Properties for Efficient and Diversified Functions

Photochemically Enhanced Emission by Introducing Rational Photoactive Subunits into an Aggregation-Induced Emission Luminogen.

Phototriggered Aggregation‐Induced Emission and Direct Generation of 4D Soft Patterns