Fabrication of Superhydrophobic Bilayer Composite Coating for Roof Cooling and Cleaning

Yulin Xi,Zhangbin Yang,Jun Zhang

DOI: https://doi.org/10.1016/j.conbuildmat.2021.123283

IF: 7.4

2021-01-01

Construction and Building Materials

Abstract:Building energy consumption is an important part of energy consumption. Cooling materials can be applied to reduce building energy consumption. In this study, chromium trioxide (Cr2O3) and titanium dioxide (TiO2) were introduced into low-density polyethylene (LDPE) matrix to prepare the solar infrared reflective layers, then styrene-butadiene-styrene triblock copolymer (SBS) and surface functionalized nano-silicon dioxide (SiO2) superhydrophobic coating was constructed on the surface forming bilayer composites applying for building roof. It was found that SBS/SiO2 coating had higher roughness, which provoked a soaring contact angle of about 160 degrees realizing superhydrophobic surfaces. Withal, the contact angle was invariant nearly 160 degrees after dropping the solution of calcium chloride (pH = 6), acid (pH = 2), and alkali (pH = 13) on the surface, which engendered chemical stability and anti-pollution property. Subsequently, the emissivity of LDPE and 10 wt% Cr2O3 composites coated with SBS/SiO2 coating (LDPE/Cr-10/S) as well LDPE and 10 wt% TiO2 composites coated with SBS/SiO2 coating (LDPE/Ti-10/S) were increased to 83% and 83.9% along with high near-infrared reflectance was 47% and 63.1% separately. Simultaneously, when the initial temperature was 24 degrees C for 1 h under strong light irradiation in indoors, the final temperature of glass was 69 degrees C while the finished temperature of LDPE/Cr-10/S and LDPE/Ti-10/S were reduced to 30.5 degrees C and 25.8 degrees C respectively, showing the excellent cooling property. (C) 2021 Elsevier Ltd. All rights reserved.