Abstract:Abstract The parabolic dish concentrator is one of the most efficient technologies to convert direct beam radiation into thermal energy for steam and power generation. The parabolic dish concentrates direct beam radiation from the sun on to a receiver at the focal point. The receiver plays a major role to transform the reflected solar radiation into thermal energy. The conversion efficiency of the dish is severely influenced by imperfection of the dish collector such as the contour of parabola, size of the facets aligned, positioning of the receiver and tracking of the system. These imperfections are mainly involved in the design, manufacturing, construction and operation of a parabolic dish collector. To overcome this imperfection, secondary reflector are normally deployed at the focal region of the receiver. The function of the secondary reflector reradiates the deviated rays from the primary concentrator onto the receiver. In this aspect, flat receiver is initially fabricated to evaluate the performance of the flat receiver without secondary reflector. In this paper, the experimental investigations on flat receiver for 12.6 m 2 area of solar parabolic dish concentrator system to estimate the receiver temperature and overall heat transfer coefficient of the flat receiver. In order to estimate this, rectangular box type aluminium receiver is fabricated and placed at the focal point of 2.42 m from the base of the dish. The aperture area of dish concentrator system is 12.6 m 2 area and it consists of 12 petals and in each petals 128 flat mirrors of size 7.5 cm × 7.5 cm with reflectivity of 0.95 are pasted on 1.2 mm thickness MS plate to form a parabolic dish concentrator. The azimuth and elevation manual tracking arrangements are made to track the dish continuously for different orientation of the sun. K-type thermocouples are used to measure the temperatures of the top and bottom of the receiver. To measure the maximum temperature of the receiver, experiments are carried out for stagnation conditions (without heat retrieval from the receiver). Experiments are carried out on 5 th , 6 th and 7 th March 2018 from 10.00 am to 3.00 pm. For different direct beam solar radiation, the top and bottom temperatures, ambient temperatures are measured. The maximum temperature of 399°C is achieved at the bottom surface of the flat receiver for the beam radiation of 955 W/m 2 , and the corresponding top surface temperature of 58°C is achieved for the same flux. Based on the measured bottom surfaces temperatures, the overall heat transfer coefficient of bottom surface are estimated as 145.56 W/m 2 K. Based on this study, further heat transfer analysis will be carried out for the developed flat receiver.

Numerical Performance Investigation of Parabolic Dish Solar-Assisted Cogeneration Plant Using Different Heat Transfer Fluids

Experimental Investigation of a Small-Scale Parabolic Trough Concentrated Solar Power ‎Systems

Numerical investigation to optimize the modified cavity receiver for enhancement of thermal performance of solar parabolic dish collector system

Numerical Study to Investigate the Performance of U-shaped Flat Plate Solar Collector Using Phase Change Materials (PCMs)

Thermal performance of parabolic trough solar collector employing novel absorber tubes equipped with distinct heat transfer fluids: An experimental study

A Hybrid Parabolic Trough Solar Collector System Integrated with Photovoltaics

Hydrothermal performance assessment of a parabolic trough with proposed conical solar receiver

Experimental study of the energy and exergy performance of a solar parabolic dish concentrator integrated with thermal energy storage

Experimental Investigations of Stagnation Temperature and Overall Heat Transfer Coefficient of Flat Receiver for Solar Parabolic Dish Concentrator System

Simulated Performance Analysis of a Hybrid Water-Cooled Photovoltaic/Parabolic Dish Concentrator Coupled with Conical Cavity Receiver

Optimization of thermal efficiency on solar parabolic collectors using phase change materials - experimental and numerical study

Performance analysis of parabolic type solar water heater by using copper-dimpled tube with aluminum coating

Comparative performance assessment of different absorber tube geometries for parabolic trough solar collector using nanofluid

Performance Assessment of a Solar Tower Assisted Combined Cycle Power Plant Using Supercritical Carbon Dioxide As a Heat Transfer Fluid

Dynamic Performance Analysis of Photovoltaic–thermal Solar Collector with Dual Channels for Different Fluids

Experimental Investigation on a Parabolic Trough Solar Collector for Thermal Power Generation

Parabolic Trough Collector with Internal Fractal Fins in Receiver to Increase Thermal Performance in Working Fluid

Heat transfer study of a new hybrid photovoltaic/thermal direct absorption parabolic solar collector by two-phase Buongiorno model

Performance study of parabolic trough solar collector using hybrid nanofluids under Jordanian weather conditions

Cupric oxide nanofluid influenced parabolic trough solar collector: thermal performance evaluation

An experimental investigation on thermal and optical analysis of cylindrical and conical cavity copper tube receivers design for solar dish concentrator