Abstract:Supercapacitors, which can supply superior energy density compared to conventional dielectric capacitors and higher power density than batteries, have attracted considerable attention as a promising energy storage device. However, cycle performance and specific energy density are still key factors limiting its practical applications. This work reports a facile synthesis of high-performance asymmetric supercapacitors with hybrid nickel phosphides/ nickel foam as positive electrode and biomass-based sulfur-doped hierarchical porous activated carbon as negative electrodes. It demonstrates a novel one-step colloid synthesis of nickel phosphides directly on commercial nickel foam as only nickel source. The obtained electrode exhibits satisfactory specific capacity of 1032 C g(-1) (2293 F g(-1)) at 1 A g(-1) and cyclic stability over 10,000 cycles. Most importantly, the fabricated asymmetric supercapacitor devices show excellent cyclic stability with 85.7% capacitance retention after 10,000 cycles and deliver a maximum energy density of 42.2 Wh kg(-1) at 741.1Wkg(-1) power density. To the best of our knowledge, the assembled device in this report has absolute advantages in fields requiring simultaneous high energy density and long-term operation at high current density. These promising results demonstrate the possibility of a facile synthesis of efficient asymmetric supercapacitors with high electrochemical response and cycling stability.

One-step Synthesis of Amino Acid-Derived HTC/NiO/Ni(OH)2@Ni Cathode for High Performance Supercapacitors

Mesoporous Ni2CoS4 Electrode Materials Derived from Coordination Polymer Bricks for High-Performance Supercapacitor

Facile synthesis of morphology-controllable NiCo<sub>2</sub>S<sub>4</sub> arrays on activated carbon textile as high-performance binder-free supercapacitor electrode

Co3O4@CoNi-LDH Core/shell Nanosheet Arrays for High-Performance Battery-Type Supercapacitors

Synthesis of NiMn-LDH Nanosheet@Ni 3 S 2 Nanorod Hybrid Structures for Supercapacitor Electrode Materials with Ultrahigh Specific Capacitance

Micro-Spatial Hydrothermal Preparation of Nitrogen-doped Carbon/NiCo2S4 Electrode Material for Supercapacitors

High-Performance Ni-Co Sulfide Nanosheet-Nanotubes Grown on Ni Foam As a Binder Free Electrode for Supercapacitors

Ni-Co Selenide Nanosheet/3D Graphene/Nickel Foam Binder-Free Electrode for High-Performance Supercapacitor

One-step colloid fabrication of nickel phosphides nanoplate/nickel foam hybrid electrode for high-performance asymmetric supercapacitors

One-step preparation of Co3O4/C/Ni(OH)2@NF electrode for high performance supercapacitor

Covalently Coupled Ultrafine H-TiO2 Nanocrystals/Nitrogen-Doped Graphene Hybrid Materials for High-Performance Supercapacitor.

A One‐Step and Binder‐Free Method to Fabricate Hierarchical Nickel‐Based Supercapacitor Electrodes with Excellent Performance

Atomically thin Co-doped nickel oxide/hydroxide superstructure toward high-energy supercapacitors

Ultrathin Ni(OH)2 Nanosheets: Microemulsion Assisted Hydrothermal Synthesis and Application in Advanced Hybrid Supercapacitors

Facile Synthesis of Ni-Co Double Hydroxide on Carbonized Cotton Cloth for High Performance Supercapacitor

Nickel–Cobalt-Layered Double Hydroxide Nanosheets Supported on NiMoO 4 Nanorods with Enhanced Stability for Asymmetric Supercapacitors

Facile Synthesis of NiCo2S4/CNTs Nanocomposites for High-Performance Supercapacitors.

One-Step Hydrothermal Preparation of Tio2/Rgo/Ni(Oh)(2)/Nf Electrode with High Performance for Supercapacitors

Hybrid Α-Fe2o3@ni(oh)2 Nanosheet Composite for High-Rate-performance Supercapacitor Electrode.

In situ growth of NiCo2O4 nanosheets arrays on Ni foam for high-performance supercapacitor

Binder and conductive agent‐free electrode for the excellent aqueous asymmetrical supercapacitor