Abstract:In order to improve the calculation methodology for the flexural capacity of RC (Reinforced Concrete) beams strengthened with HB-CFRP (Hybrid Bonded-Carbon Fiber Reinforced Polymer), three-point bending tests were conducted in this study. The experimental setup involved 9 HB-CFRP strengthened T-shaped beams and 1 unstrengthened beam for comparison. The effects of anchor spacing, anchor pressure, CFRP thickness, and anchor distribution pattern on the flexural performance of strengthened beams were investigated. Additionally, the development of the full range load-deflection curves of the HB-CFRP strengthened specimens was analyzed. Two bond strength models (the Wu model and Liu model) were modified. Six parameters were considered in the modified model, namely, the CFRP elastic modulus, CFRP thickness, number of mechanical fasteners in the shear span, CFRP-concrete width ratio, concrete cylinder compressive strength and normal pressure applied to the mechanical fasteners. The accuracy of the modified models was compared on the basis of three specifications. Results indicated a notable enhancement in the flexural capacity of the strengthened beams, ranging from 61.1 % to 158.1 % compared to the unstrengthened beam. Taking the ACI specification as an example, the mean value and coefficient of variation (COV) of the flexural capacity obtained by directly using the Wu model were 1.187 and 0.169, respectively; the results obtained by using the modified Wu model based on the measured FRP strain were 1.038 and 0.125, respectively; and the results obtained by using the modified Wu model based on the ACI reversed-calculated strain were 1.012 and 0.106, respectively. After the strengthened beam reached the peak load, the load then decreased abruptly to the vicinity of the moment mid-span deflection curve of the reference beam. As the loading continued, the resistance improved by 27.4 %∼79.3 % due to the increase in interface friction in the mechanical fasteners and concrete.

Flexural Design of Reinforced Concrete Structures Strengthened with Hybrid Bonded FRP

Ultimate Strength of Reinforced Concrete Beams Retrofitted with Hybrid Bonded Fiber-Reinforced Polymer

Effect of Shear Resistance on Flexural Debonding Load-Carrying Capacity of RC Beams Strengthened with Externally Bonded FRP Composites

A Design Proposal for Concrete Cover Separation in Beams Strengthened by Various Externally Bonded Tension Reinforcements

A New Flexural Strength Model of CFRP-strengthened RC Beams with Intermediate Crack Induced Debonding Failure

Flexural Strength Design of Hybrid FRP-Steel Reinforced Concrete Beams

Reliability-Based Evaluation of Flexural Members Strengthened with Externally Bonded Fiber-Reinforced Polymer Composites

Numerical Analyses of Hybrid-Bonded Frp Strengthened Concrete Beams

Flexural capacity design model of reinforced concrete beams strengthened with hybrid bonded CFRP

CFRP Strengthened RC Beams with Pre-Strengthening Non-Uniform Reinforcement Corrosion Subjected to Post-Strengthening Wetting/drying Cycles

Design models for the debonding strength of RC beams strengthened with FRP sheets/plates

Flexural performance of RC beams using hybrid anchored CFRP sheets with bond defects

Effect of Reinforcement Ratio on the Flexural Performance of Hybrid FRP Reinforced Concrete Beams

Flexural property and design method evaluation of BFRP and steel bars hybrid reinforced concrete beams

Finite element analysis of ductility and flexural capacity of FRP and steel bars hybrid reinforced concrete beams

Study on the deformation of hybrid BFRP-steel reinforced concrete beams considering crack development

An Improved Prediction for Bond Strength of Deformed Bars in Concrete Externally Confined with Fiber-Reinforced Polymer

Flexure Strengthening and Analysis Using CFRP Composite and Reactive Powder Concrete

Flexural Behavior of Concrete Beam Strengthened by Near-Surface Mounted CFRP Reinforcement Using Equivalent Section Model

Experimental Study on FRP-to-Concrete Bonded Joints with FRP Sheet Anchor System

Flexural performance of reinforced concrete beams strengthened using near-surface-mounted carbon-fiber-reinforced polymer bars: Effects of bonding patterns