Abstract:A fault tolerant control (FTC) approach based on reconfigurable control allocation for four-wheel independently driven and steered (4WID/4WIS) electric vehicles against driving motor failures is proposed in order to improve vehicle safety, performance and maneuverability after the driving motor failures. The proposed fault tolerant control method consists of the following three parts: 1) a fault detection and diagnosis (FDD) module that monitors vehicle driving condition, detects and diagnoses actuator failures; 2) a motion controller that computes the generalized forces/moments to track the desired vehicle motion using model predictive control method; 3) a reconfigurable control allocator that optimally distributes the generalized forces/moments to four wheels aiming at minimizing the total tire usage. The FTC approach is based on the reconfigurable control allocation which reallocates the generalized forces/moments among healthy actuators once the actuator failures is detected. If one or more driving motors fails, the FDD module diagnoses the actuator failures. Then the reconfigurable control allocator accommodates faulty driving motors and reconfigures the control allocation law of the healthy motors to achieve the desired vehicle motion to the greatest extent. Numerical simulations have been conducted to verify the proposed algorithm. It has been shown from the simulations that once the driving motor fails, the fault tolerant controller ensures the desired vehicle motion. Compared to the PID controller, the fault tolerant controller prevents the deviation after actuator failures occur, improving the post-fault safety, performance and maneuverability of the 4WID/4WIS EVs. Copyright © 2013 SAE International.

Fault-Tolerant Controller Design for Path Following of the Autonomous Vehicle under the Faults in Braking Actuators

Research on Path Tracking Fault-Tolerant Control Strategy for Intelligent Commercial Vehicles Based on Brake Actuator Failure

Fault-Tolerant Control Study of Four-Wheel Independent Drive Electric Vehicles Based on Drive Actuator Faults

Integral Reinforcement Learning–based Adaptive Fuzzy Fault Tolerant Control of Hypersonic Flight Vehicle

Path Following Fault-Tolerant Control of Distributed Drive Autonomous Unmanned Vehicle Via Adaptive Terminal Sliding Mode

Fault tolerant control against actuator failures of 4WID/4WIS electric vehicles

Fault-Tolerant Pressure Control for Electro-Hydraulic Braking System

Fault-tolerant control based on adaptive dynamic programming for reentry vehicles subjected to state-dependent actuator fault

Active fault-tolerant control scheme for four-wheel independent drive electric vehicles under actuator faults

Nonlinear adaptive fault-tolerant control for full-car active suspension with velocity measurement errors and full-state constraints

Linear parameter-varying-based fault-tolerant controller design for a class of over-actuated non-linear systems with applications to electric vehicles

Active FTC of LPV Systems with Actuator Fault

Adaptive Distributed Finite‐time Fault‐tolerant Controller for Cooperative Braking of the Vehicle Platoon

Actuator Fault-Tolerant Control for Four-Wheel-Drive-by-Wire Electric Vehicle

Modeling and Fault-Tolerant-Control of Four-Wheel-Independent-Drive EVs

Robust Takagi–Sugeno Fuzzy Fault Tolerant Control for Vehicle Lateral Dynamics Stabilization with Integrated Actuator Fault and Time Delay

Fault-Tolerant H-Infinity Control For Active Suspension Vehicle Systems With Actuator Faults

Coordinated Fault Tolerant Control of Over-Actuated Electric Vehicles Based on Optimal Tyre Force Distribution

Adaptive Synthesized Fault-Tolerant Autonomous Ground Vehicle Control with Guaranteed Performance and Saturated Input

Adaptive Sliding Mode Fault Tolerant Control for Autonomous Vehicle With Unknown Actuator Parameters and Saturated Tire Force Based on the Center of Percussion

Adaptive Fault‐tolerant Control for Feedback Linearizable Systems with an Aircraft Application