Abstract:Summary Dyes are widely and intensively used in leather , textile , paper , printing , cosmetic , plastic , food and pharmaceutical industries . Most of them pose serious threats to the environment because of their carcinogenic potential and cytotoxicity . Hence , effluents containing dye molecule must be treated to minimize the threat to the ecosystem . Adsorption has been found to be one of the prominent techniques for dye wastewater treatment considering cost and efficiency . While the main disadvantage of physical adsorption is its simple transfer of the dye molecules to another phase rather than complete destruction . Therefore , it is meaningful to find an efficient adsorbent and explore the synergistic effect of the prepared adsorbent by combining adsorption material with dye‐biodegrading microorganisms . Methyl red was selected as model azo dyes in this study to investigate the biosorption behavior of newly produced chitosan‐biochar microsphere , and meanwhile the enhancing effect of microsphere‐microbe complex on removal of the dye was evaluted . To study the biosorption mechanism and capacity of chitosan‐biochar microsphere for methyl red , the Langmuir and Freundlich adsorption isotherms were used to examine the system of methyl red and microsphere . The pesudo‐first‐order and pesudo‐second‐order models were used to describe the biosorption kinetics . Elovich equation and inter‐diffusion model were applied to interpret the process of adsorption . In this work , artificial neural network (ANN) model was selected to analyze the parameters that affecting adsorption . The input layer had four neurons such as pH , initial dye concentration , temperature and adsorption time . The output layer had one neuron as adsorption capacity . Finally , degrading strain Bacillus sp . UN2 was immobilized by the microspheres to remove the methyl red in solutions , and the enhancing removal effect of microsphere‐microbe complex for the dye was explored . The results showed that the chitosan‐biochar microsphere was an efficient adsorbent , and the maximum biosorption capacity of 460 mg/g for methy red was observed under the initial dye concentration of 500 mg/L , pH 3 .0 and 20 °C conditions . The data of biosorption were fitted with Freundlich isotherm and the pseudo‐second‐order kinetic model successfully . The data based on Elovich equation and inter‐diffusion mode proved the dominant status of adsorption against desorption . The values of thermo‐dynamic parameters ΔG0 , ΔH0 and ΔS0 were-24 .35 kJ/mol (30 ℃) , -21 .36 kJ/mol and 8 .45 J/(mol. K) respectively . Therefore , the adsorption was a spontaneous , exothermic process , with inter‐diffusion as the limiting step for biosorption of methyl red onto biosorbent . Artificial neural network model analysis indicated that the temperature appeared to be the most influential parameter for biosorption process with a relative importance of 32 .76% , followed by adsorption time (25 .56% ) , pH ( 23 .36% ) and initial dye concentration ( 18 .32% ) . Immobilization with microsphere could improve the tolerance level of degrading strain Bacillus sp . UN2 in methyl red solution with high concentration , and the removal rate for methyl red was increased by 29% and 76% respectively by chitosan‐biochar‐microbe complex compared with chitosan‐biochar microsphere and free strains alone . In conclusion , the newly produced chitosan‐biochar microsphere is an efficient adsorption material for methyl red . The maximum biosorption capacity is better than ever reported . The adsorption is a spontaneous , exothermic process , with the inter‐diffusion as the limiting step for biosorption of methyl red onto biosorbent . Temperature is the most influential parameter for biosorption process . Significantly enhancing adsorption effect is achieved when the chitosan‐biochar microsphere immobilized the degrading strain Bacillus sp . UN2 , which offers an environment‐friendly and cost‐competitive method to treat the dye pollution .

Implementation of a multilayer statistical physics model to interpret the adsorption of food dyes on a chitosan film

Adsorption of Congo Red Dye Onto Raw and Chitosan-Modified Bentonite

Novel films prepared from spirulina and chitosan for textile pollutant removal: Experiments and theoretical study of adsorption equilibrium via an advanced theoretical approach

Adsorption of Acid Dyes from Aqueous Solutions by the Ethylenediamine-Modified Magnetic Chitosan Nanoparticles.

Preparation of Chitin with Different Degrees of Deacetylation from Crab Shells Waste and Its Application in the Removal of Congo Red

Kinetics, Isotherm and Thermodynamic Studies for Efficient Adsorption of Congo Red Dye from Aqueous Solution onto Novel Cyanoguanidine-Modified Chitosan Adsorbent

Acid Dye Adsorption Properties of Ethylenediamine-Modified Magnetic Chitosan Nanoparticles

Adsorption study of eosin yellow and fluorescein dyes from aqueous solution using chitosan schiff base/polyvinyl acetate and its Fe2O3 nanocomposite

Removal of anionic and cationic dyes using porous chitosan/carboxymethyl cellulose-PEG hydrogels: Optimization, adsorption kinetics, isotherm and thermodynamics studies

Biosorption of Chitosan-Biochar Microsphere for Methyl Red and Biosorption Enhancing Effect of Microsphere-Microbe Complex

Intraparticle diffusion processes during acid dye adsorption onto chitosan

Chitosan-Terephthalic Acid-Magnetic Composite Beads for Effective Removal of the Acid Blue Dye from Aqueous Solutions: Kinetics, Isotherm, and Statistical Modeling

Micro-mechanism insights into the adsorption of anionic dyes using quaternary ammonium-functionalised chitosan aerogels

Acid dye adsorption onto cationized polyamide fibres. Modeling and consequent interpretations of model parameter behaviours

Adsorption efficiency of highly methylene blue dye concentrations with multilayer chitosan-modified clays for a precise nanofiltration performance of polluted water

Hydrothermal-Assisted Grafting of Schiff base Chitosan by Salicylaldehyde for Adsorptive Removal of Acidic Dye: Statistical Modeling and Adsorption Mechanism

Fabrication of Magnetic Chitosan-Benzil Biopolymer with Organoclay for Remazol Brilliant Blue R Dye Removal: a Statistical Modeling and Adsorption Mechanism

Grafting 3-trimethoxysilylpropyl)diethylenetriamine on microcrystalline cellulose for the adsorption of dyes: Experimental and modeling studies

Thermodynamics of sorption of drugs on chitosan: low- and high-concentration analysis

Improving the Co-removal Efficiency of Dyes from Water by a Novel Four-Component Chitosan Flexible Film Containing Graphene Oxide

The effective removal of Congo red dye via chitosan-layered double hydroxide composite and the deep insight into mechanism