Sensorless Control for Unsymmetrical Bistable Multi-magnetic Circuit Permanent Magnet Actuator Based on High-frequency Signal Injection and High Pass Filter Circuit
Guanbao Zeng,Yang Xiangyu,Yu Haoyong,Yiyang Jing,Shiwei Zhao,Jianghua Cao,Qing Chen,Mengzhen Gao,Zifan Zhang,Xiangyu Yang,Haoyong Yu,Shi Wei Zhao
DOI: https://doi.org/10.1109/tie.2021.3123670
IF: 7.7
2021-01-01
IEEE Transactions on Industrial Electronics
Abstract:In this article, a sensorless control method based on signal injection and a high-pass filter (HPF) circuit is presented to control the unsymmetrical bistable multimagnetic circuit permanent magnetic actuator. In this method, a high-frequency sinusoidal signal was indirectly injected into the idle phase via a HPF circuit, and the peak of the high-frequency capacitance current was measured, which was used to calculate the idle phase inductance. Thereafter, the mover position was calculated by the one-to-one relationship between the idle phase inductance and the mover position. Combined with the HPF circuit and the proposed average current peak algorithm, the influences of back-EMF and coil resistance were eliminated. The magnetic saturation effects can also be ignored in the proposed strategy. The estimated noise, caused by measurement noise and signal distortion, was filtered using a simple mathematical filter. The flexibility and accuracy of the presented strategy were verified by simulation and experimental investigation.
automation & control systems,engineering, electrical & electronic,instruments & instrumentation