Abstract:DOI: 10.1002/adma.201400317 as dynamers by Lehn, [ 25,26 ] are stimuli-responsive polymers, most notably exhibiting macroscopic responses to changes in pH. [ 27,28 ] Several imine-containing polymers have been demonstrated, including pH-responsive hydrogels [ 20 ] and a working organic light-emitting diode (OLED). [ 23 ] However, the potential of polyimines as malleable, mechanically resilient polymeric materials, as well as their processability, have remained largely unexplored. We envision that imine-linked polymers can take malleability in covalent network polymers to the next level of simplicity, affordability and practicality. Herein, we present the fi rst catalyst-free malleable polyimine which fundamentally behaves like a classic thermoset at ambient conditions yet can be reprocessed by application of either heat or water. This means that green, room temperature processing conditions are accessible for this important class of functional polymers. A crosslinked polyimine network was prepared from commercially available monomers: terephthaldehyde, diethylene triamine, and triethylene tetramine ( Figure 1 a). A polyimine fi lm was obtained by simply mixing the three above components in a 3:0.9:1.4 stoichiometry in the absence of any catalyst in a mixture of organic solvents (1:1:8, v/v/v, CH 2 Cl 2 /EtOAc/EtOH), then allowing the volatiles to evaporate slowly. Alternatively, the polymer can be obtained as a powder by using ethyl acetate as the only solvent. The polymerization reaction was confi rmed by infrared spectroscopy, which revealed that aldehyde end groups were consumed while imine linkages were formed (Figure S2, Supporting Information). The resulting translucent polymer is hard and glassy at room temperature ( T g is 56 °C) (Figure S1, Supporting Information) and has a modulus of near 1 GPa with stress at break of 40 MPa (Figure S3, Supporting Information). The time and temperature dependent relaxation modulus of the polyimine fi lm was tested to characterize the heat-induced malleability. Figure 1 b depicts the results of a series of relaxation tests over a wide range of temperatures (50–127.5 °C) on a double logarithmic plot. Specifi cally, at 80 °C, the bond exchange reaction is initiated and the normalized relaxation modulus is decreased from 1 to 0.11 within 30 min, indicating an 89% release of the internal stress within the thermoset polymer. By shifting each relaxation curve horizontally with respect to a reference temperature at 80 °C, a master relaxation curve was constructed (Figure 1 c), which indicates the stress relaxation of the polyimine follows the classic time-temperature superposition (TTSP) behavior. The plot of time-temperature shift factors as a function of temperature (Figure 1 d) shows that the polyimine’s stress-relaxation behavior exhibits Arrheniuslike temperature dependence. Using the extrapolation, we calculated that while it takes 30 min for the stress to be relaxed by ca. 90% at 80 °C, the same process would take ca. 480 days at room temperature. The polyimine is thus the fi rst reported Covalent network polymers, which offer robust mechanical properties, generally lack the ability to be recycled. [ 1 ] There has been a great deal of research effort to incorporate reversible crosslinks into network polymers in order to obtain mechanically tough materials with self-healing properties. [ 2–13 ] Many have employed non-covalent crosslinks to achieve this goal. Ionic and hydrogen bonds are readily reversible and have been known to achieve effi cient self-healing performances. [ 14–17 ]

Malleable, Recyclable, and Robust Poly(amide–imine) Vitrimers Prepared Through a Green Polymerization Process

Synthesis of Facilely Healable and Recyclable Imine Vitrimers Using Biobased Branched Diamine and Vanillin

Performance-modified Polyimine Vitrimers: Flexibility, Thermal Stability and Easy Reprocessing

Malleable and Sustainable Poly(ester Amide) Networks Synthesized Via Melt Condensation Polymerization

Facile Preparation of Polyimine Vitrimers with Enhanced Creep Resistance and Thermal and Mechanical Properties Via Metal Coordination

Rehealable Imide-Imine Hybrid Polymers With Full Recyclability

Multifunctional Vitrimer-Like Polydimethylsiloxane (PDMS): Recyclable, Self-Healable, and Water-Driven Malleable Covalent Networks Based on Dynamic Imine Bond

High-Performance Poly(imide-imine) Vitrimers Derived from Semiaromatic Bisimide Diamines

Self-Healable, Malleable, Ecofriendly Recyclable and Robust Polyimine Thermosets Derived from Trifluoromethyl Diphenoxybenzene Backbones.

A Conjugation Polyimine Vitrimer: Fabrication and Performance

Malleable and recyclable imide-imine hybrid thermosets: influence of imide structure on material property

Poly(imine-amide) Hybrid Covalent Adaptable Networks Via in Situ Oxidation Polymerization

Biobased vitrimers: Towards sustainable and adaptable performing polymer materials

Integrating Sacrificial Bonds into Dynamic Covalent Networks Toward Mechanically Robust and Malleable Elastomers

Dynamic Imidazole-Urea Bonds for Designing Recyclable and Crosslinked Poly(imidazole-Urea)

Adaptable Polyurethane Networks Containing Tertiary Amines as Intrinsic Bond Exchange Catalyst

Reprocessable and Chemically Recyclable Poly(Acylhydrazone-Imine) Covalent Adaptable Networks with Enhanced Mechanical Strength and Creep Resistance

Mechanically Robust, Recyclable, and Self-Healing Polyimine Networks.

Comprehensive itaconic acid-based vitrimers via one-pot inverse vulcanization

Heat‐ or Water‐Driven Malleability in a Highly Recyclable Covalent Network Polymer

Reprocessible Triketoenamine-Based Vitrimers with Closed-Loop Recyclability