Abstract:Liquids confined between two parallel plates can perform the function of transmission, support, or lubrication in many practical applications, due to which to maintain liquids stable within their working area is very important. However, instabilities may lead to the formation of leaking drops outside the bulk liquid, thus it is necessary to transport the detached drops back without overstepping the working area and causing destructive leakage to the system. In this study, we report a novel and facile method to solve this problem by introducing the wedgelike geometry into the parallel gap to form a parallel-nonparallel combinative construction. Transport performances of this structure were investigated. The criterion for self-propelled motion was established, which seemed more difficult to meet than that in the nonparallel gap. Then, we performed a more detailed investigation into the drop dynamics under squeezing and relaxing modes because the drops can surely return in hydrophilic combinative gaps, whereas uncertainties arose in gaps with a weak hydrophobic character. Therefore, through exploration of the transition mechanism of the drop motion state, a crucial factor named turning point was discovered and supposed to be directly related to the final state of the drops. On the basis of the theoretical model of turning point, the criterion to identify whether a liquid drop returns to the parallel part under squeezing and relaxing modes was achieved. These criteria can provide guidance on parameter selection and structural optimization for the combinative gap, so that the destructive leakage in practical productions can be avoided.

Hydraulics and Mass Transfer Characteristics of Novel Helical Liquid-Bridge Flow Structured Packings

Liquid-liquid Two-Phase Flow and Mass Transfer in T-shaped Micro-Channel Network

Hydrodynamics of New Structured Packings: an Experimental and Micro-scale CFD Study

EFFECTS OF INLET ARRANGEMENTS ON LIQUID-LIQUID FLOW PATTERNS IN CROSS-JUNCTION SQUARE MICROCHANNELS

Exploring the Essence of Three-Phase Packed Distillation: Substantial Mass Transfer Computation

Liquid-bridge flow on a vertical spiral spring and its mass transfer characteristics

Liquid Holdup for Two-Phase Countercurrent Flow in the Packed Column with a Novel Internal

Liquid‐liquid Two‐phase Flow Patterns in a New Helical Microchannel Device

Direct-Contact Condensation of Hydrocarbon Mixtures in A Structured Packing Bed

Experimental Investigation on Submerged Gas-Liquid Mixture Injection into Water Through A Micro-Channel

On Liquid Flow Maldistribution through Investigation of Random Open-Structure Packings

Directional Transport of a Liquid Drop between Parallel-Nonparallel Combinative Plates.

Effect of Channel Opening Angle on the Performance of Structured Packings

Experimental and Numerical Study on Flow Resistance and Bubble Transport in a Helical Static Mixer

CFD Simulation of Flow and Mass Transfer in Structured Packing Distillation Columns

3D CFD simulation of the liquid flow in a rotating packed bed with structured wire mesh packing

A new approach to intensify the structured packing

Liquid Film Characteristics on Surface of Structured Packing

Liquid dispersion behaviors in a rotating packed bed with different packing arrangements: A comparison study

Numerical Investigation on the Flow Characteristics of Liquid Oxygen and Water in the Structured Packing

Liquid–liquid mass transfer and pressure drop behavior in micro‐packed beds with different shaped packings